030677 North 1Light Small Pendant Light
Product Information
- Product Name: NORTH 1LT SMALL PENDANT
- SKU#: 030677, 039370
- Colour: Textured Black, Textured Chalk
- Rated Voltage: 220-240V~ 50Hz
- Rated Wattage: Max. 45W
- Lamp Holder: ES / E27
- Weight: 2.6kg
- Canopy Dimensions: H:25mm L:120mm W:120mm
- Luminaire Dimensions: H:300mm L:250mm W:250mm Susp:1800mm
Product Usage Instructions
- Remove all packaging material from the product and make sure
not to discard any hidden accessories. - If assembly is required, place the luminaire on a smooth
non-scratch surface. - Detach the mounting bracket (B) from the canopy (G) by
loosening the nuts (H). - Use the mounting bracket (B) as a template to mark the screw
hole positions on the ceiling. - Install the mounting bracket (B) onto the ceiling using
appropriate mounting screws (D), washers (C), and anchors (A).
Ensure they are suitable for the mounting surface and
environment. - Determine the suspension length needed for your installation
location. Attach the required lengths of suspension rod (I & J)
to the luminaire body. Install the canopy (G) on top of the
suspension rod. - Add the cord restrainer (F) to the luminaire wire.
- Connect the luminaire wires and the mains supply wire to the
terminal block (E). Ensure the wires are secure and no bare wires
are exposed. This luminaire is a Class I product and must be
earthed during wiring and installation. - Reinstall the canopy (G) onto the mounting bracket (B) and
tighten the nuts (H). - Install a globe (M – not included) into the lamp holder (K). Do
not exceed the maximum wattage rating. - After installation, switch on the luminaire to test and enjoy
your new lighting product.
Installation Instructions
NORTH 1LT SMALL PENDANT
SKU# 030677, 039370 Rated Voltage 220-240V~ 50Hz
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation, and use of this luminaire. Please keep instructions for future reference.
Warranty
· This luminaire is covered by a 12-month warranty. The warranty is from the date of purchase, not the date of installation.
· If the luminaire is not assembled and installed by a licensed electrician, the warranty will be void. · Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries. · Warranty will be void if there is any damage due to improper usage or modification to the luminaire. · Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the
warranty.
Installation Requirements
· This luminaire must be assembled and installed by a licensed electrician. · All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
E.g. AS/NZS 3000 Electrical Installations. · This luminaire is a Class I product and must be earthed during wiring and installation. · Do not exceed the maximum wattage rating. · Select a suitable location for installation:
– This luminaire is suitable for indoor use only. – The mounting point must support 2 times the weight of the luminaire. – Ensure the luminaire is not installed in the direct line of an air vent/system. – If installing a luminaire in an area prone to moisture, ensure that the area is well ventilated, and an appropriately
rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty. · Take care not to pull any electrical wires during unpacking as this may damage the connection. · Lay out all the components on a smooth surface and make sure no components are missing before assembling. · If parts are missing, return the complete product to the place of purchase for inspection or replacement. · Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement. · Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.
1 |Page
v2.1 (2/2023)
Installation Instructions
Installation Directions
1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.
2. Remove the mounting bracket (B) from the canopy (G) by loosening the nuts (H) at the front.
3. Use the mounting bracket (B) as a template to mark the screw hole positions on the ceiling.
4. Install the mounting bracket (B) onto the ceiling by using appropriately sized mounting screws (D), washers (C) and
anchors (A). Ensure the screws (D), washers (C) and anchors (A) used are suitable for the mounting surface and
the surrounding environment.
5. Determine the suspension length required for your installation location. Install the required lengths of suspension
rod (I & J) onto the luminaire body. Install the canopy (G) to the top of the suspension rod.
NOTE: Take care not to cross-thread or twist and damage the luminaire wires during assembly.
Pull the luminaire wires out as you assemble.
Check the luminaire wires after every three turns when installing the suspension rod (I&J)
onto the luminaire body. Relieve any twist in the cord by turning it anti-clockwise.
6. Add the cord restrainer (F) to the luminaire wire.
7. Connect the luminaire wires and the mains supply wire to the terminal block (E).
Mains Supply Wire
Luminaire Wire / Terminal block
Earth Yellow/Green
Yellow/Green or
Neutral Blue or Black
Blue or N
Live Brown or Red
Brown or L
NOTE: Ensure the wires are secure, and no bare wires are exposed.
NOTE: This luminaire is a Class I product and must be earthed during wiring and installation.
NOTE: Ensure the earth wires from the mounting bracket (B) and the canopy (G) are connected to the earth
terminal block (E).
8. Install the canopy (G) back onto the mounting bracket (B) and secure it by tightening the nuts (H).
9. Install a globe (M – not included) into the lamp holder (K). Do not exceed the maximum wattage rating.
10. After the installation, switch on the luminaire to test and enjoy your new lighting product.
2 |Page
v2.1 (2/2023)
Installation Instructions
3 |Page
v2.1 (2/2023)
Installation Instructions
Safety Tips
· Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
· To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
· Select a suitable location away from liquids and hazards. · To clean, wipe with a soft damp cloth. Do NOT soak or immerse the luminaire in water or other liquids. · Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.
Specifications
SKU #
030677
039370
Colour
Textured Black
Textured Chalk
Rated Voltage
220-240V~ 50Hz
Rated Wattage
Max. 45W
Lamp Holder
ES / E27
Weight
2.6kg
Canopy Dimensions
H:25mm L:120mm W:120mm
Luminaire Dimensions
H:300mm L:250mm W:250mm Susp:1800mm
4 |Page
v2.1 (2/2023)
