589150-BLK Desta 3 LT Vanity Light
DESTA 3 LT Vanity Light
SKU#589150-BLK / 589150-SN
Product Information
- This vanity light can be installed in an uplight or downlight
position. - The product comes in two colors: black (SKU#589150-BLK) and
satin nickel (SKU#589150-SN). - The product requires a Phillips screwdriver for
installation. - All electrical connections must be in accordance with local and
National Electrical Code (N.E.C.) standards. If you are unfamiliar
with proper electrical wiring connections obtain the services of a
qualified electrician.
Usage Instructions
Before installation, turn off the main power at the circuit
breaker to prevent possible shock.
- Remove the fixture and mounting package from the box and ensure
that all parts are present by referring to the illustrations on the
installation instructions. - Using a Phillips screwdriver, assemble and install the fixture
according to the instructions provided. - After installation, turn on the power at fuse or circuit
breaker. - If you are unsure about the electrical installation, consult a
licensed electrician.
For any inquiries or concerns, please contact customer service
at 1-800-558-8700.
DESTA 3 LT VANITY LIGHT SKU#589150-BLK / 589150-SN
ASSEMBLY / INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. Tools are required when installing this fixture.
Phillips screwdriver
REQUIRED TOOLS
ASSEMBLY AND INSTALLATION
This light can be installed in an uplight or a downlight position.
Turn off the power at fuse or circuit breaker 1. Carefully unpack the fixture, lay out all parts on a clean surface. 2. Fasten the MOUNTING RING onto the OUTLET BOX by using 2 OUTLET BOX SCREWS provided. 3. Tie ground wire from OUTLET BOX and from fixture to the GROUND SCREW on the MOUNTING RING. Connect white wire from fixture to white wire (neutral wire) from supply circuit. Connect black wire from fixture to black wire (live wire) from supply circuit. Cover connections using provided WIRE CONNECTORS. 4. Place the WALL PLATE over the MOUNTING SCREWS, then secure them with LOCK NUTS until tightened. 5. Place the GLASS SHADES over the sockets and secure with the SOCKET RINGS tightly. 6. Install the BULBS (not included).
Turn on the power at fuse or circuit breaker.
ITEM#589150-BLK / 589150-SN
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN.
Customer Service: 1-800-558-8700
