Il Fanale 061.52 Anita Table Lamp User Manual

061.52 Anita Table Lamp
User Manual

061.52 Anita Table Lamp

ANITA DESIGN BY DT STUDIO			CODE 061.17
1 x MAX 15W LED	E27	220-240 V 50/60 Hz		IP 20
FIOR DI PIZZO DESIGN BY DT STUDIO			CODE 065.17
1 x MAX 15W LED	E27	220-240 V 50/60 Hz		IP 20

REMARKS/KEY GUIDE

FOR THE INSTALLATION AND THE MAINTENCE OF THIS APPLIANCE, PLEASE CONTACT A QUALIFIED PROFESSIONAL.
The appliance safety is only guaranteed if the following instructions are respected during both installation and use; it is therefore necessary to keep them.

• Keep the original box until the warranty period, in case of dispute the appliance must be returned with the original packaging.
• After removing the packaging, check the integrity of the appliance. If this is not the case, or if you are in doubt, do not use the appliance and contact your dealer.

BEFORE INSTALLATION AND IN CASES OF MAINTENANCE, ENSURE THAT THE POWER SUPPLY HAS BEEN SHUT OFF TO THE APPLIANCE.

• Before connecting the power supply make sure that the plate information corresponds to those of the electrical distribution network.
• Il Finale Group is not responsible for any damage caused by an appliance that needs to be grounded and is installed in an electrical system that is not grounded.
• Il Finale Group is not responsible for damages caused from a noncompliant installation of its products.
• The appliance cannot be modified or tampered with in any way; any modification may compromise its safety and making it dangerous. Il Finale group is not responsible for modified products.
• Do not exceed the maximum electrical power indicated in the technical data.
• In the case of failure or malfunction contact your dealer.

BRASS OR COPPER OUTDOOR LUMINAIRES: METALS UNDERGO AN ACCELERATED OXIDATION TREATMENT THAT GIVES A PARTICULAR AGEING COATING, CALLED “ANTICATO”. THE OXIDATION PROCESS OF THE DEVICES LASTS OVER TIME REACHING A MATURATION LEVEL DUE TO WEATHERING AGENTS OF THE AREA, BY ACQUIRING A TYPICAL NATURAL OXIDATION DARK COLOUR.
ANTIQUE IRON OUTDOOR LUMINAIRES: THE COMPANY ADDS A LAYER OF TRANSPARENT PAINT THAT SLOWS DOWN OXIDATION PROCESS.
LED VERSIONS: the light source cannot be replaced by the client. for information contact your dealer.
The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product.
CLEANING: before carrying out any cleaning or maintenance, switch off the appliance and disconnect from the electrical distribution network and let stand until it has cooled.
WARNING!

• Do not use alcohol or solvents when cleaning.
• Do not remove the labels affixed which contain important technical specifications of the lighting fixture.

• IRON OR COR-TEN OUTDOOR APPLIANCES (PAINTED): only use a soft cloth moistened with water and mild soap.
• BRASS AND COPPER OUTDOOR APPLIANCES: only use a soft cloth and liquid wax.
The finishing of this item is a totally handcrafted processing. The inhomogeneity is a distinctive element and an exclusive value of a “unique” product.

	Class I
	Class II
	Class III
	Luminaire designed to be used only with selfshielded lamps.
	Luminaires not suitable for covering with thermally insulating material.
	Replace any cracked protective shield.
	Luminaires not suitable for direct mounting on normally flammable surfaces (suitable only for mounting on non-combustible surfaces).
	Minimum distance from lighted objects (meters).
	Do not stare at the light source.
IP20	Ordinary.
IP3X	Protected against solid objects greater than 2.5 mm.
IP4X	Protected against solid objects greater than 1 mm.
IP5X	Dust-proof.
IP6X	Dust-tight.
IPX1	Drip-proof.
IPX3	Rain-proof.
IPX4	Splash-proof.
IPX5	Jet-proof.
IPX6	Powerful water jet-proof.
IPX7	Watertight (immiscible).
IPX8	Pressure-watertight (submersible).