IJ303A Wireless Speaker
Product Information
The Wireless Speaker is available in two series: IJ303A and
IJ304A, with FCC ID: 2AJXA-BTSPK-2. It has a wireless version of
V5.3 and a working range of 10m. The frequency range is 2402-2480
MHZ, and the frequency response is 30-18 KHZ. The maximum input
power is 3W, and the battery capacity is 500mAh Lithium. The
speaker has a playtime of 3-4 hours and a charging time of 2-3
hours via a micro-cable. The battery type is 14500, and the
charging port type is micro.
Product Usage Instructions
Charging the Battery
The Wireless Speaker takes approximately 3 hours to fully charge
and allows for continuous playback for about 4 hours. To charge,
connect the speaker to the USB charging cable. The LED indicator
will turn RED when the speaker is charging. The LED indicator will
turn OFF when the device is fully charged.
Wireless Pairing
To pair your smartphone with the Wireless Speaker, make sure the
Wireless mode on your smartphone is switched ON, and then switch ON
the power of your wireless speaker to start pairing. After doing
so, the speaker will appear in the new Wireless devices that could
be paired to your smartphone. Select FunAmp to pair your mobile
device with the speaker.
Note:
In addition to playing music, the speaker can be used to answer
phone calls by pressing the Button.
Using Your Speaker
- Long press the power button to Power On/Power Off.
- Single press the Button to Play/Pause Music/Answer/End
call/Capturing(Camera Mode). - Single press the Button to go to the Previous Song. Press and
hold the Button to decrease the volume. - Single press the Button to go to the Next Song. Press and hold
the Button to increase the volume.
LED Light Indicator
The LED indicator shows the charging state. When the LED is
always on in Red color, it means the speaker is charging. When the
charging is completed, the Red LED turns off.
Regulatory Notice
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. For help, changes or modifications not
expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment. This equipment
complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be
located or operated in conjunction with any other antenna or
transmitter. The device has been evaluated to meet general RF
exposure requirements. The device can be used in a portable
exposure condition without restriction.
Wireless Speaker
Series: IJ303A, IJ304A FCC ID : 2AJXA-BTSPK-2
Wireless Speaker
æ Power Switch ç Short press for the next song; Long press to increase the volume è Short press for the previous song; Long press to decrease the volume é Play/Pause ê Short press to change RGB light color; Long press to turn On/Off the light ë TF Card Slot ì AUX Mode Port í Micro USB Charging Port î LED Status light
OPERATING INSTRUCTIONS
Charging the battery A full charge is approximately 3 hours and allows playing continuously for about 4 hours. Connect the speaker to the USB charging cable to charge. When the LED indicator is RED, the speaker is charging.The LED indicator goes OFF when the device is fully charged.
Wireless pairing To pair your smartphone with the Wireless speaker, please make sure the Wireless mode on your smartphone is switched ON and then switch ON the power of your wireless speaker to start the pairing. After doing so the speaker will appear in the new Wireless devices that could be paired to your smartphone. Please select “FunAmp” to pair your mobile device with the speaker.
Note: In addition to playing music, the speaker can be used to answer phone calls by pressing the ” ” Button.
USING YOUR SPEAKER
Long press the power button: Power On /Power Off Single press the ” ” button: Play/Pause Music/Answer/End call/
Capturing(Camera Mode) Single Press the button ” ” : Next Song Press and hold the button ” ” : (Speaker) Volume up Single Press the button ” ” : Previous Song Press and hold the button ” ” : (Speaker) Volume down
Charging Working Time: 3-4 Hours Charging Time: 2-3 Hours (via Micro Cable) Note: while in pairing mode, the speaker will power off after 5 minutes if it does not connect to any device.
LED LIGHT INDICATOR
Charging state: LED always on Red color Charging completed: Red LED is off
SPECIFICATIONS
Product: Wireless Speaker Wireless Version: V5.3 Working range: 10m Frequency Range: 2402-2480 MHZ Frequency Response: 30-18 KHZ Impedance4
Maximum input power3W Battery capacity500mAh Lithium Play time3-4H Charging time2-3H
Battery Type: 14500
Charging Port Type: Micro
REGULATORY NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However, there is no guarantee that interference will not occur in a par cular installa on. If this equipment does cause harmful interference to radio or television recep on, which can be determined by turning the equipment o and n, he u er is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separa on between the equipment and
receiver. · Connect the equipment into an outlet on a circuit
di erent from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician
for help. Changes or modi ca ons not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with Part 15 of the FCC Rules. Opera on is
subject to the following two condi ons: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired opera on.
This equipment complies with FCC RF radia on exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operated in conjunc on with any other antenna or transmier. The device has been evaluated to meetgeneral RF exposure requirement. The device can be used in portable exposure condition without restriction.
