IJ301A Wireless Speaker
Product Information: Wireless Speaker
The Wireless Speaker comes in two series: IJ301A and IJ302A. It
has an FCC ID of 2AJXA-BTSPK-1 and a wireless version of V5.3. The
speaker has a working range of 10m and an impedance of 4. It has a
maximum input power of 5W and a battery capacity of 500mAh Lithium.
The speaker has a charging port type of Micro and a charging time
of 2-3 hours via Micro Cable. The playtime is 3-4 hours.
LED Light Indicator
- Pairing Mode: Flashing Blue Indicator
- Playing Music: Slow flashing Blue Indicator
- Charging via Micro Cable: Red LED Light Indicator
- Fully Charged: No LED Light Indicator (Light Off)
Regulatory Notice
The device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Product Usage Instructions
Follow the steps below to use the Wireless Speaker:
- To charge the battery, gently pull out the port cover (4) on
the back of the speaker and rotate it open. Plug the Micro USB end
of the provided charging cable into the Micro USB port (6) under
the port cover (4) on the back of the Speaker. - Plug the other end of the charging cable into a compatible 5V
wall charger or USB port. The Charging Indicator Light (5) will
turn on to indicate a successful connection, and turn off when
fully charged. - To pair with a wireless device, turn on the speaker. The
speaker will automatically enter Wireless pairing mode. Open the
Wireless menu on your smartphone or other wireless device and look
for FunAmp from the list of pairable devices. - Once paired with a device, it will automatically connect the
next time it is turned on and the device is in Wireless mode. - To use the speaker, gently pull out the port cover (4) on the
back of the speaker and rotate it open. Flip the Power Switch (7)
underneath to the ON or OFF position.
Wireless Speaker
Wireless Speaker
Series: IJ301A, IJ302A FCC ID: 2AJXA-BTSPK-1
æ RGB LED Light ç Speaker è Lanyard é Port Cover ê LED Indicator Light
ë Micro USB Charging lnput ì Power Switch í LED Light î Subwoofer
OPERATING INSTRUCTIONS
Charging the battery Gently pull out the port cover (4) on the back of the speaker and rotate it open. Plug the Micro USB end of the provided charging cable into the Micro USB port (6) under the port cover (4) on the back of the Speaker. Plug the other end into a compatible 5V wall charger or USB port. The Charging Indicator Light (5) will turn on to indicate a successful connection, and turn off when fully charged.
Wireless pairing Once turned on the speaker will automatically enter Wireless pairing mode. Open the Wireless menu on your smartphone or other wireless device and look for “FunAmp” from the list of pairable devices. 0nce paired with a device it will automatically connect next time it is turned on and the device is in Wireless mode.
USING YOUR SPEAKER
Gently pull out the port cover (4) on the back of the speaker and rotate it open. Flip the Power Switch (7) underneath to the “ON” or “OFF” position.
Charging Working Time: 3-4 Hours Charging Time: 2-3 Hours (via Micro Cable)
LED LIGHT INDICATOR
Pairing Mode: Flashing Blue Indicator Playing Music: Slow flashing Blue Indicator Charging via Micro Cable: Red LED Light Indicator Fully Charged: No LED Light Indicator (Light Off)
SPECIFICATIONS
Product: Wireless Speaker Wireless Version: V5.3 Working range: 10m Impedance: 4 Maximum input power: 5W
Battery capacity: 500mAh Lithium Play time: 3-4H Charging time: 2-3H Battery Type: 14500 Charging Port Type: Micro
REGULATORY NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However, there is no guarantee that interference will not occur in a par cular installa on. If this equipment does cause harmful interference to radio or television recep on, which can be determined by turning the equipment o and n, he u er is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separa on between the equipment and
receiver. · Connect the equipment into an outlet on a circuit
di erent from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician
for help. Changes or modi ca ons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Opera on is subject to the following two condi ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera on.
This equipment complies with FCC RF radia on exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operated in conjunc on with any other antenna or transmier.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
