78652b Clean 24 Inch Self Propelled
Product Information
This product is a seat replacement kit with the following
details:
- Product code: 8400 6144 / 8400 6145
- Model: Unspecified
- Date of assembly instructions: 78652B 2022-04-07
Product Usage Instructions: Changing the Seat
Follow the steps below to change the seat:
- Remove the existing seat by unscrewing any bolts or screws
holding it in place. - Place the new seat onto the mounting bracket and align it with
the bolt holes. - Insert bolts or screws through the holes in the seat and
tighten them securely.
Note: Make sure that the new seat is compatible with your
specific model and that all bolts and screws are tightened securely
to ensure safe usage of the product.
Monteringsanvisning/Assembly instructions/Montageanweisung
8400 6144 8400 6145 Byte av sits Changing the seat Austausch des Sitzes
78652B 2022-04-07
Vrid armstödslås (orange) utåt. Lyft armstödet. Ta av armstödslåset från låsbygel
(grå). Bänd med t.ex. en skruvmejsel. Knacka loss låsbygeln med hammare
underifrån. Lossa TORX-skruvar och ta av klam-
mer. Lossa sitsen genom att knacka med
handen underifrån. Montera den nya sitsen i omvänd
ordning.
Wrench loose the armrest lock (orange).
Lift up the armrest. Take off the armrest lock. Prize loose
with a screwdriver. Loosen the mounting (grey) by tap-
ping from underneath. Loosen the TORX-screws and take off
the bracket. Take off the seat by tapping with the
hand from underneath. Mount the new seat in opposite order.
Die Armlehnenarretierung (orange) nach außen biegen.
Armlehen abheben. Die Armlehnenarretierung von
Halterung (grau) abnehmen. Einen Schraubenzieher als Hebel benutzen. Die Halterung abnehmen. Dabei von unten mit einem Hammer klopfen. Die TORX-Schrauben abschrauben und die Halteklammer abnehmen. Den Sitz von unten mit der Hand anschlagen und abnehmen. Den neuen Sitz in umgekehrter Reihenfolge einbauen.
Etac Supply Center AB Långgatan 12 SE-334 33 Anderstorp www.etac.com
Etac - A world-leading developer of assistive devices
