Tidoin Db-yddbk-73b 2 Drawer Lateral File Cabinet Installation Guide

Product Information

The product being referred to in this manual is a watch display
case. It consists of various components that need to be assembled
to create the finished product. The manual provides step-by-step
instructions for installation and assembly of the product.

Contents

The following are the contents of the manual:

• Product Disassembly Pictures
• Product Accessories Introduction
• Base Installation
• Back Panel Installation
• Top Plate Installation
• Mounting Screw/Test Drawer Key
• Adjust Lock Lever
• Drawer Installation
• Hanging Rod Installation
• Finished Product Display

Product Usage Instructions

Before starting with the installation, please scan the QR code
to watch the installation video.

Base Installation

1. Place the base on a flat surface.
2. Align the four holes on the base with the four screws
   provided.
3. Tighten the screws with a screwdriver to secure the base.

Back Panel Installation

1. Align the back panel with the slots on the base.
2. Slide the back panel down until it locks into place.

Top Plate Installation

1. Align the top plate with the slots on the back panel.
2. Slide the top plate down until it locks into place.

Drawer Installation

1. Insert the drawer into the slots on the base.
2. Align the drawer with the back panel and slide it in.
3. Adjust the lock lever to secure the drawer.

Hanging Rod Installation

1. Insert the hanging rod into the holes on the back panel.
2. Adjust the height of the hanging rod to your preference.

Finished Product Display

Once all components are assembled, your watch display case is
ready for use. Place your watches on the hanging rod or in the
drawer for display.