225-9808 Lift Tape for Surface Sampling
Stick-to-it Lift Tape for Surface Sampling
Cat. Nos. 225-9808 and 225-9809
Product Information:
The Stick-to-it Lift Tape for Surface Sampling, available in
Cat. Nos. 225-9808 and 225-9809, is a specialized tape designed for
collecting samples from surfaces for laboratory analysis. It
features an adhesive side that securely attaches to the surface,
allowing for the collection of particles or contaminants.
Operating Instructions:
- Remove the slide from the slide mailer.
- Document the sample location and other required information for
the laboratory. - Peel off the protective liner from the slide to expose the
adhesive. (Pull the liner from top down for best results.) - Place the slide adhesive side down on the surface to be
sampled. - Gently press down on the slide to ensure proper contact is
made. - Carefully remove the slide from the surface and place it back
into the slide mailer. - Send the slide to the laboratory for analysis.
SKC Limited Warranty and Return Policy:
SKC products, including the Stick-to-it Lift Tape, are subject
to the SKC Limited Warranty and Return Policy. This policy outlines
SKC’s sole liability and provides the buyer’s exclusive remedy. For
more information, please visit skcinc.com/warranty.
Form 40065 Rev 220707
Stick-to-it
Lift Tape for Surface Sampling Cat. Nos. 225-9808 and 225-9809 Operating Instructions
Stick-to-it
Lift Tape for Surface Sampling Cat. Nos. 225-9808 and 225-9809 Operating Instructions
1. Remove slide from slide mailer. 2. Document the sample location and other required information for
the laboratory. 3. Peel off protective liner from slide to expose adhesive.
(Pull liner from top down for best results.) 4. Place slide adhesive side down on the surface to be
sampled. 5. Gently press down to ensure contact is made. 6. Carefully remove slide from surface and place back
into slide mailer. 7. Send slide to laboratory for analysis.
SKC Limited Warranty and Return Policy SKC products are subject to the SKC Limited Warranty and Return Policy, which provides SKC’s sole liability and the buyer’s exclusive remedy. To view the complete SKC Limited Warranty and Return Policy, go to skcinc.com/warranty.
skcinc.com
Form 40065 Rev 220707
1. Remove slide from slide mailer. 2. Document the sample location and other required information for
the laboratory. 3. Peel off protective liner from slide to expose adhesive.
(Pull liner from top down for best results.) 4. Place slide adhesive side down on the surface to be
sampled. 5. Gently press down to ensure contact is made. 6. Carefully remove slide from surface and place back
into slide mailer. 7. Send slide to laboratory for analysis.
SKC Limited Warranty and Return Policy SKC products are subject to the SKC Limited Warranty and Return Policy, which provides SKC’s sole liability and the buyer’s exclusive remedy. To view the complete SKC Limited Warranty and Return Policy, go to skcinc.com/warranty.
skcinc.com
Form 40065 Rev 220707
Stick-to-it
Lift Tape for Surface Sampling Cat. Nos. 225-9808 and 225-9809 Operating Instructions
Stick-to-it
Lift Tape for Surface Sampling Cat. Nos. 225-9808 and 225-9809 Operating Instructions
1. Remove slide from slide mailer. 2. Document the sample location and other required information for
the laboratory. 3. Peel off protective liner from slide to expose adhesive.
(Pull liner from top down for best results.) 4. Place slide adhesive side down on the surface to be
sampled. 5. Gently press down to ensure contact is made. 6. Carefully remove slide from surface and place back
into slide mailer. 7. Send slide to laboratory for analysis.
SKC Limited Warranty and Return Policy SKC products are subject to the SKC Limited Warranty and Return Policy, which provides SKC’s sole liability and the buyer’s exclusive remedy. To view the complete SKC Limited Warranty and Return Policy, go to skcinc.com/warranty.
skcinc.com
Form 40065 Rev 220707
1. Remove slide from slide mailer. 2. Document the sample location and other required information for
the laboratory. 3. Peel off protective liner from slide to expose adhesive.
(Pull liner from top down for best results.) 4. Place slide adhesive side down on the surface to be
sampled. 5. Gently press down to ensure contact is made. 6. Carefully remove slide from surface and place back
into slide mailer. 7. Send slide to laboratory for analysis.
SKC Limited Warranty and Return Policy SKC products are subject to the SKC Limited Warranty and Return Policy, which provides SKC’s sole liability and the buyer’s exclusive remedy. To view the complete SKC Limited Warranty and Return Policy, go to skcinc.com/warranty.
skcinc.com
Form 40065 Rev 220707
SKC, Inc. | Industrial Hygiene and Occupational Safety Products and Technology
