4409-CH-CL-MWP 9 Light Crystal Chandelier
Product Information
This product is a lighting fixture model #4409-CH-CL-MWP. It has
been providing lighting solutions for sixty years. The fixture is
dry rated and requires electrical installation by a licensed
electrician in accordance with the National Electric Code and local
electrical codes.
The product comes with various crystal sets labeled A to M, each
containing different sizes and quantities of crystals. It also
includes parts A, B, C, D, E, F, G, H, I, J, K, L, M, N, Q, R, and
S.
Product Usage Instructions
- Before starting the installation, make sure to do a complete
inventory of all parts and components. - Screw the top glass dish and loop onto the coupling.
- Place the glass dish and small metal dish over the bottom metal
cover and secure them with the finial. - Safely attach the fixture into the outlet box.
- Install the bobeches and bulbs (not included).
- Connect the power.
- Dress the fixture starting with the packet labeled (A).
- IMPORTANT: Apply crystal sets in alphabetical order.
- Refer to the detailed illustration for the specific arrangement
of crystals and their corresponding parts.
Note: The fixture requires 9-Candelabra Base Bulbs with a
recommended wattage of 40 Watts (maximum 60 Watts). It is
recommended to use LED bulbs for extended use.
I
I H GJ
GH
I
GJ H
I
I
(5(A) CRYSTALS)
I H
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #4409-CH-CL-MWP
WARNING:
Electrical Danger Turn Power Off
All electrical components must be
installed by a licensed electrician
in accordance with the National H
Electric Code and the appropriate
local electrical codes.
C
U R
L
K
You will need 9-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE The fixture is dry rated
G
28″
DETAILED ILLUSTRATION
A
B
D
E
F
G
H
I
J
14mmx12
K
L
M
How to Install
1.Do a complete inventory of all parts and components before you start installing.
2.Screw the top glass dish & Loop on the coupling. 3.Place the glass dish and small metal dish over the bottom
metal cover and secure with the finial. 4.After safety attaching fixture into outlet box, install
bobeches, bulbs (not included) and proceed to connecting the power. 5.When you begin to dress the fixture,start with packet labeled(A). 6.IMPORTANT: Apply crystal sets in alphabetical order.
Crystal Sets
A. 45Sets. (1)14mm + AS9-1.5″
B. 5Sets. (8)14mm + AS9-2″ C. 4Sets. (4)14mm + AS9-2.5″
D. 4Sets. (6)14mm + AS20-3″ E. 12Sets. (1)14mm + AS20-3″ F. 8Sets. (1)28mm + AS9-3″ G. 4Sets. (8)14mm + (1)16mm Square + AS20-3″ H. 8Sets. (11)14mm + (1)16mm Square + AS9-2.5″
I . 8Sets. J . 4Sets. K. 4Sets. L . 4Sets.
(12)14mm + (1)16mm Square + AS20-3″ (7)14mm + (1)16mm Square + AS9-2.5″ (13)14mm + (1)16mm Square + AS9-2.5″ (7)14mm + (1)16mm Square + AS20-3″
M. 1Piece. (8)14mm + AS8-50mm Ball
LIGHTING THE WAY FOR SIXTY YEARS PART NUMBER MODEL #4409-CH-CL-MWP
N
R
Q
S
Part Number
Part Numbers
A. (2)-Wire Connector B. (1)-Mounting Plate C. (2)-Outlet Box Screws D. (1)-Lock washer E. (1)-Hex Nut F. (1)-Nipple G. (1)-Canopy; w5″ x h1″ (XFB4405CHCAN5IN) H. (1)-Collar Ring I. (1)-Collar Loop J. (1)-Chain; 72″, 4mm (XFB4405CHCHA4MM) K. (1)-Ground Wire L. (1)-Loop M. (1)-Dish; Ø5″, 13mm hole, 5pin (XFB4409CHDIBOB5IN) N. (1)-Dish; Ø4″, 11mm hole (XFB4409DIBOB4IN) O. (1)-Center Bobeche; Ø4″, 26mm hole (XFB4409DIBOB4INA) P. (1)-Dish; Ø4″, 11mm hole, 5pin (XFB4409CHDIBOB4IN) Q. (2)-Small Metal Dish R. (2)-Finial (XFB4405CHFIN) S. (4)-Frame T. (1)-Candle Sleeve; h2″ (XFB4409CDL2IN) U. (8)-Candle Sleeve; h4″ (XFB4418CDL4IN) V. (8)-Bobeche; Ø5″, 26mm hole, 5pin (XFB4418CHBOB5IN) W. ( )-Rosette
PART BAG: Includes Parts A, C
PART BAG : Includes Parts B, E, F, H, I, D
