*If the machine does not have a heater switch next to the power switch, there is no heater on the machine
- Model 1400 does not have a heater
- Model 50Y6’s power switch is the heater switch
- The heater needs 30 seconds to warm before light illuminates
- After deactivating the heater, the light will stay illuminated until the heater substantially cools down
- Light will illuminate for as long as the heater is at the correct temperature
- Any water that was left in hose from prior use will spray out cold
- Allow 1 minute for any fluid left in hose to travel to end of hose
- The heater will increase water temperature up to 25 degrees
- If there is still no heat, please visit a BISSELL Authorized Service Center or Contact Us
