C40 40W CO2 Laser Tube
Product Information:
The C40 40W CO2 Laser Tube is a professional-grade glass laser
tube that is mainly used in laser engraving and cutting machines.
It is a spare part that provides strong energy for laser engraving
and cutting on various non-metal materials such as acrylic, cloth,
leather, bamboo, wood, and paper. The laser tube adopts German
Schott discharge tube and special coating technology to improve its
performance, making it the best choice for your laser machine.
Features & Details:
- Professional CO2 glass laser tube
- Mainly used in laser engraving and cutting machines
- Supplies strong energy for engraving and cutting on non-metal
materials - Adopts German Schott discharge tube and special coating
technology to improve performance - Model#C40 40W with a length of 700mm and outer diameter of
50mm
Technical Parameters:
- Rated power output: 40W
- Length: 700mm
- Beam diameter: 4mm
- Wavelength: 10.6um
- Material: Boron Silicate Glass
- Trigger voltage: 17KV
- Working voltage: 10KV
- Optimal operating current: 18mA
- Gross Weight: 1.6kg (3.53bs)
- Package Size: 86.8 x 9.5 x 12.5cm/34.17 x 3.74 x 4.92inch
Product Usage Instructions:
- Before installing the C40 40W CO2 Laser Tube, make sure that
your laser engraving or cutting machine is turned off and unplugged
from the power source. - Locate the laser tube compartment in your machine and remove
the old laser tube if necessary. - Place the C40 40W CO2 Laser Tube in the compartment and secure
it in place according to your machine’s instructions. - Connect the high-voltage wire, low-voltage wire, and
water-cooling system to the laser tube as per your machine’s wiring
diagram. - Turn on your laser machine and check if the laser tube is
working properly. Adjust the current and voltage settings if
necessary. - When done using the laser machine, turn it off and unplug it
from the power source. Allow the laser tube to cool down before
removing or replacing it.
User Manual
Product ModelC40 40W CO2 Laser Tube
Product Instruction
Professional co2 glass laser tube, mainly used in laser engraving machine, laser cutting machine. It is a spare part for laser machines that can engrave and cut acrylic, cloth, leather, bamboo, wood ,paper and most of other non metal materials. Our CO2 laser tube in model#C40 40W
(700mm*50mm) adopts the uses German Schott discharge tube and special coating technology to improve the performance of the laser tube. It is definitely your best choice.
Features & Details
1HIGH TEMPERATURE RESISTANCE- This co2 laser tube is made of the boron silicate glass that is also applied on the solar tubes. It is resistant to high temperature and high pressure. 2TEMOO MODE- This co2 laser tube adopts the TEMOO mode, which is characterized by high spot concentration, high energy density as well as good and stable spot. At the same time, the use of output mirrors further enhances the mode. 3SPECIAL COATING TECHNOLOGY- The inside of the discharge tube (imported German Schott tube)uses the special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold. 4LONGER SERVICE LIFE- Our service life of discharge tubes coated with special catalysts is much improved. Compared with other same kind laser cutting tubes, our 40W co2 laser can last longer.
5VARIOUS APPLICATION- Model#C40 40W co2 laser tube is very Professional, as the main spare parts of co2 laser engraving and cutting machine, it supplies for the strong energy “laser” during engraving and cutting.
Technical Parameters
Rated power output: 40W Length: 700mm Beam diameter: 4m Wavelength: 10.6um Material: Boron Silicate Glass Outer diameter: 50mm Trigger voltage: 17KV Working voltage: 10KV Optimal operating current: 18mA Gross Weight: 1.6kg(3.53bs) Package Size: 86.8 x 9.5 x 12.5cm/34.17 x 3.74 x 4.92inch
Installation Drawing
