645860 Dual Air Compressor
Product Information
The XTM Dual Air Compressor is a 150PSI, 250LPM dual air
compressor that comes with a timer cut-off protection feature. This
product is manufactured and packaged for SRGS PTY LTD and has a PLU
of 645860 and a code of WM102-15C. The product is made in China and
comes with a 12-month warranty.
Thermal Cut-Off and Circuit Breaker Protection
The XTM Dual Air Compressor comes with thermal cut-off and
circuit breaker protection to prevent damage.
Timer Cut-Off Protection
The air compressor has an automatic timer cut-off protection
feature that cuts off the air compressor after 15 minutes of
continuous operation to avoid damage.
Maintenance
All moving parts within the air compressor are permanently
lubricated during manufacture, so it is not necessary to lubricate
the air compressor. Before and after each use, carefully inspect
the compressor unit and hoses for signs of damage. Check the air
filter regularly, at least every six months. To clean the filter,
gently wash it in mild soapy water and rinse well. Replace if
worn.
Tyre Gauge Pressure Readings
During operation, tyre gauge pressure readings will not be
accurate. Turn off the air compressor to obtain an accurate
reading.
Product Usage Instructions
- Before use, inspect the compressor unit and hoses for signs of
damage. - Check the air filter regularly, at least every six months, and
clean it if necessary. - Turn off the air compressor to obtain an accurate tyre gauge
pressure reading. - Use the air compressor for a maximum of 15 minutes at a time to
avoid damage. - If the product becomes defective during the 12-month warranty
period, take it to the front Service Desk of your nearest store of
purchase. You will need to show receipt or other proof of
purchase. - Any expenses relating to the return of your product to the
store will normally have to be paid by you, unless assessed as
having a major failure.
Warranty
The XTM Dual Air Compressor comes with a 12-month warranty,
which covers defects in quality and manufacturing. If the product
becomes defective during this period, SRGS PTY LTD will offer you
either a replacement, credit or refund where a product is faulty;
wrongly described; different from the sample shown to you or do not
do what they are supposed to do. This warranty will not cover
substantially modified product; misuse or abuse of the product
contrary to user instructions or packaging label; change of mind
and normal wear and tear. To claim the warranty, take the product
to the front Service Desk of your nearest store of purchase.
Consumer Law
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and failure does not amount to a major
failure.
Warning
Do not use this product for anything other than its intended
use. Misuse may result in injury or damage. Always follow the
instructions carefully.
THERMAL CUT-OFF AND CIRCUIT BREAKER PROTECTION
This XTM Dual Air Compressor is equipped with an automatic thermal cut-off protection. If the unit reaches an unsafe operating temperature, a protection circuit will activate cutting off all power of the unit to prevent damage. Immediately disconnect the unit from the power source and allow it to cool if the protection circuit activates. The unit should take approximately 15 minutes to cool depending on ambient conditions. The unit protection circuit will automatically reset when the temperature returns to a safe operating level. Always allow your air compressor to cool before reuse. The auto reset circuit breaker is built-in to protect an electrical circuit from damage caused by overload or short circuit.
TIMER CUT OFF PROTECTION This XTM Dual Air Compressor is equipped with an automatic timer cut-off protection. After 15 minutes of continuous operation, the air compressor will cut off to avoid damage.
MAINTENANCE
+ All moving parts within the air compressor have been permanently Iubricated during manufacture. It is NOT necessary to lubricate this air compressor.
+ Before and after each use, carefully inspect the compressor unit and hoses for signs of damage. + Check the air filter regularly, at least every six months. Simply remove the cover and clean the air filter.
To clean the filter gently wash in mild soapy water and rinse well. Replace if worn.
TYRE GAUGE PRESSURE READINGS DURING OPERATION WILL NOT BE ACCURATE. TURN OFF THE AIR COMPRESSOR TO OBTAIN AN ACCURATE READING.
SPECIFICATIONS
Voltage: 12 Volt DC Maximum Pressure: 150 PSI Maximum Air Flow: 250 Litres Per Minute Inline Fuse: 100A Maximum Voltage: 13.8 Volt Maximum Amp Draw: 90 Amp Bset Operating Temperature: -15ºC To 35ºC Electrical Current Protection: Circuit Breaker Thermal Cut-off Protection: Automatic Thermal Cut-off at I05ºC Automatic Timer Cut-off After 15 Minutes Continuous Operation Cylinder Diameter: 2 X 60mm Power Cord: 2 Metres Heavy Duty Cable With Durable Battery Clamps Rubber Air Hose: 10 Metres with In-line Pressure Gauge,Pressure Release Button and Quick Connect Fitting Valve Connectors: 1 X Screw-on Brass Inflator and 1 X Thumb Lock Adaptor Pressure Gauge: 0-150 PSI / 0-1, 034 kPa Multi Readings with Plastic Protective Cover Solid Base Plate: Metal Sand Tray With Rubber Anti – Vibration Feet Air Filter: Built-ln Cleanable Sponge Filter Accessories: 3 X Nozzle Adaptors for Camping and Sporting Equipment Storage: Handy Carry Bag
PLU: 645860 CODE: WM102-15C Manufactured & packaged for SRGS PTY LTD ABN 23 113 230 050 6 Coulthards Avenue
Strathpine QLD 4500, Australia MADE IN CHINA
150PSI 250LPM DUAL AIR COMPRESSOR OWNERS MANUAL
DON’T GET CAUGHT OUT WITH INADEQUATE GEAR WHILE 4WDING BECAUSE THERE’S NOTHING WORSE THAN BEING STRANDED OFF THE BEATEN TRACK!
The XTM 150PSI 25OLPM Dual Air Compressor would be a great addition to your next adventure.
WARRANTY
Our product is guaranteed to be free from quality and manufacturing defects for a period of 12 months.
If your product becomes defective during this period, SRGS PTY LTD will offer you either a replacement, credit or refund where a product is faulty; wrongly described; different from the sample shown to you or do not do what they are supposed to do.
This warranty will not cover substantially modified product; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure.
To claim the warranty, take the product to the front Service Desk of your nearest store of purchase. You will need to show receipt or other proof of purchase. Additional information may be required to process your claim. Should you not be able to provide proof of purchase with a receipt or bank statement, identification showing name, address and signature may be required to process your claim.
Any expenses relating to the return of your product to the store will normally have to be paid by you. For online store purchases, SRGS PTY LTD will pay for the return freight for any product assessed as having a major failure.
The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in relation to the goods or services to which this warranty relates.
This warranty is provided by SRGS PTY LTD, 6 Coulthards Avenue Strathpine, QLD 4500, Australia. Phone: 1300 880 764.
WARNING
+ Read entire owners manual thoroughly before use. + This air compressor can only operate on a 12 Volt electrical system. + Use extreme caution when connecting air compressor to a power source as vehicle’s batteries
Page 1
can spark and/or vent explosive gasses. The use of safety glasses is recommended whilst using the unit. + All parts of this unit, including handle, hose, hose fitting, coupler and compressor generates high heat during and after operation. To avoid the risk of burns and injury, allow whole unit to cool before handling. Always use gloves when handling the unit. + Only inflate tyres to the manufacturer’s recommended pressure. DO NOT over inflate tyres as tyre failure could resulting serious injury or even death. + After 5 minutes of continuous operation allow the unit to cool before restarting. Damage can occur from continued overuse. + Do not use this compressor with wet hands or allow the compressor to get wet while in use.
OPERATING INSTRUCTIONS
1. Before operating the air compressor, check that you are in a safe location away from busy roads and traffic, inspect the air compressor and accessories for any sign of damage. If there are signs of damage, DO NOT use the air compressor and replace damaged parts.
2. Remove the air compressor from the carry bag and place it on a dry level surface near the 12 Volt vehicle battery or power source.
3. Connect the 10 metre rubber air hose to the air compressor using the quick connect fitting. 4. Choose whether you want to use the screw type connector or the thumb lock adaptor. The screw type
connector is already attached to the air hose and is ready for use. If you choose the thumb lock connector, simply screw the end of the thumb lock adaptor into the screw type connector on the air hose and ensure a good seal is made. The thumb lock adaptor is now ready to connect. 5. Connect the RED battery clamp to your 12 Volt vehicle battery or power source’s POSITIVE (+) post. Connect the BLACK battery clamp to your 12 Volt vehicle battery or power source’s NEGATIVE(-) post. 6. Test the connections and air flow by switching the air compressor `ON’ with the `ON/OFF’switch which located on the body of the air compressor. Direct the hose away from yourself or any persons nearby when testing the air compressor. 7. To inflate the tyre, connect the air hose to the tyre by removing the valve cap (if equipped) from the tyre valve system. Check that the tyre valve system is clean and free from dirt. + If using the screw type connector, screw the brass inflator onto the tyre valve system until fingertight.
DO NOT use any tool as you may damage the inflator and/or the tyre valve system. + If using the thumb lock adaptor, use your thumb to press the lever down. Firmly press onto the
tyre valve system to create a good seal. Now release the lever. Inflate the tyre by switching on the air compressor with the “ON/OFF” switch which is located on the body of the air compressor. Watch the pressure gauge closely to monitor the tyre pressure. Tyre gauge pressure readings during operation will not be accurate. Turn off the air compressor to obtain an accurate reading. Once the correct or desired pressure has been reached, turn the air compressor off. Each tyre should take approximately 1 – 2 minutes to inflate if the tyre is in good condition. Larger profile tyres may take a little longer to inflate. 8. Remove the brass inflator or the thumb lock adaptor from the tyre valve system. Remember to refit the valve cap after you have completed the inflation process. 9. Disconnect the battery clamps from the 12 Volt vehicle battery or power source. 10.Allow the air compressor to cool completely before placing inside the carry bag. Store the air compressor in a dry location.
Use extra caution when inflating small objects such as bicycle tyres and sport balls. Pay close attention to the pressure gauge and be prepared to stop the air compressor when the manufacturer’s recommended tyre pressure is reached.
Page 2
