Maxim 40625 Clyde Vx Large Outdoor Wall Sconce User Manual

MAXIM 40625 Clyde VX Large Outdoor Wall Sconce User Manual

Please consult a qualified electrician for hanging fixture and wiring.

Light Source : 1 X E26 Medium Base 60W (Not Included)

Made in China

Before Getting Started

• Read the instructions carefully prior to assembling the product.
• When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out of reach of small children.
• Choose a clean, level, spacious assembly area.
  Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product

 Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
• Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if cord is torn or frayed.

For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion.

Cleaning & Maintenance

• Apply a high quality car wax to the fixture regularly to protect from environmental factors that can damage the metal.
• Clean with soft cloth and a mild detergent.
  DO not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Content

Before getting, started, ensure the package contains the following components:

Assembly Instructions

1. This step requires removing the mounting plate from the fixture.
   
2. Caulk around backplate where fixture meets the wall leave a hole at the bottom to allow water to escape.
   
3.