MAXIM E30184-01BK Tower Outdoor Wall Sconce
Before Getting Started
| Before Getting Started |
| Read the instructions carefully prior to assembling the product. |
| When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside. |
| Carefully remove all packaging materials and retain for future use. |
| Keep all hardware parts and packaging out of reach of small children. |
| Choose a clean, level,spacious assembly area. Avoid hard surfaces that may damage the product. |
| Ensure that you have all the required content for complete assembly. |
| Take care when lifting. Assemble the product in close proximity to where you intend to position the item. |
| Do not over-tighten the screws and bolts as this may damage the threads. |
| Do not let children play with this product. |
| Risk of suffocation! Keep any packaging materials away from children. |
Lamp Care Instructions
| Lamp Care Instructions |
| Carefully read through the instruction sheet before assembly and using the product. |
| Caution there is a risk of shock. Disconnect from the power source before assembling or cleaning. |
| Switch off, unplug and allow the bulb to cool before replacing the bulb or cleaning. |
| Only use the recommended bulb type and do not exceed the maximum wattage as it could cause a fire. |
| Do not plug the product inifcord is torn or frayed. |
| For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion. |
Cleaning & Maintenance
- Apply high-quality car wax to the fixture regularly to protect it from environmental factors that can damage the metal.
- Clean with a soft cloth and mild detergent. Do not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause the color to fade.
Contents
Before getting, started, ensure the package contains the following components:
Installation
Wiring
Caulk around the backplate where the fixture meets the wall and leave a hole at the bottom to allow water to escape.
