Shortbed Heavy Duty Rear Cargo Tray
Shortbed Tray
The Shortbed Tray is a product designed to be used with the Tern
GSD, HSD, Quick Haul or Short Haul bicycles. It is used to carry
cargo during bicycle rides. The product comes with several
components to complete the assembly process.
What’s Included
- Shortbed Tray
- Shortbed Plate
- M6 x 30 mm Bolt x 4
- M6 Washer x 8
- M6 Nut x 4
- Plastic Washer x 4
- Rubber Pad x 16
- SideStrap x 2
Weight Limit
The Shortbed Tray has a weight limit of 35 kg (77 lb). Do not
exceed this weight limit when using the product.
Safety
Do not use the Shortbed Tray to move your bike. Place loads
evenly and as central on the Tray as possible. Secure all cargo
before riding. Take care that all straps are tied down and any
loose item is secured.
Installation
Tools required (not included): 10 mm Wrench, 4 mm Allen
Wrench
Affix Rubber Pads
To affix the Rubber Pads, clean the metal surface with rubbing
alcohol to remove dirt and oil. Peel off back of sticker and affix
to the locations shown in the diagram below:
| Rubber Pad | ||
| Inside Tray | Outside Tray |
Assembly Sequence
To mount parallel on the GSD:
- Bolt
- Washer
- Shortbed Tray
- Plastic Washer
- Rack Washer
- Nut
To mount perpendicular to the GSD, HSD, Quick Haul or Short
Haul:
Please refer to the assembly instructions on ternbicycles.com.
Shortbed Tray
What’s Included
1
3
2
4
5
6
7
8
1. Shortbed Tray 2. Shortbed Plate 3. M6 x 30 mm Bolt x 4 4. M6 Washer x 8 5. M6 Nut x 4 6. Plastic Washer x 4
7. Rubber Pad x 16 8. SideStrap x 2
Weight Limit
Do not exceed 35 kg (77 lb).
Safety
Do not use the Shortbed Tray to move your bike. Place loads evenly and as central on the Tray as possible. Secure all cargo before riding. Take care that all straps are tied down and any loose item is secured.
Installation
Tools required (not included) 10 mm Wrench 4 mm Allen Wrench
Affix Rubber Pads
Clean metal surface with rubbing alcohol to remove dirt and oil. Peel off back of sticker and affix to the locations shown in the diagram below.
Rubber Pad
Inside Tray
Outside Tray
ternbicycles.com
Assembly sequence To mount parallel on the GSD
Bolt Washer Shortbed Tray Plastic Washer Rack Washer Nut
To mount perpendicular to the GSD, HSD, Quick Haul or Short Haul
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the original end-user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced. Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product. Tern, the Tern Werd (logotype), the Tern Berd (device), GSD, HSD, Quick Haul, Short Haul, and Shortbed Tray used alone or in combination are trade names, trade devices or registered trademarks of Mobility Holdings, Ltd. © 2023. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved.
ternbicycles.com
Tern Bicycles | Electric Cargo Bikes & Folding Bikes
