DHMTT2022090212 5 Leaf Ceiling Fan with Light
Product Information
This product is a ceiling fan with a light plate. It consists of
a main body, blades, screws, and wires for connecting the light
plate.
Mounting Preparation
To prepare for mounting the ceiling fan, follow these steps:
- Take out the screws from the main body.
- Lock the blades to the main body.
- Connect the wires of the light plate.
Once you have completed these steps, you are ready to mount the
fan.
Mounting Instructions
Follow these steps to mount the ceiling fan:
- Place the lampshade on the lampshade groove.
- Rotate the lampshade in a clockwise direction until it makes
perfect contact. - Finish the whole installation process.
Balance Adjustment
If you experience any shaking when you switch on the ceiling
fan, follow these steps to adjust the balance:
- Switch off the ceiling fan if it is on.
- Stick one of the balance pads to the middle of one blade.
- Switch on the fan again and observe if there is any
improvement. - If there is no improvement, remove the balance pad from the
blade. - Stick the balance pad to another blade and repeat the testing
process until the fan works well without any shaking.
By following these instructions, you can properly mount and
adjust the ceiling fan for optimal performance.
take out the screws from main body,lock blades to it.then connect the wires of the light plate.
08
Preparing for mounting
Place the lampshade to the lampshade groove and rotate it by clockwise direction until perfect contact, finish the whole installation
9
10
1. switch on the ceiling fan,if shake is found, switch it off and stick one of the balance pad to the middle of one blades.switch on the fan again to see if there is any improvement.
2.If there is no improvement,take off the balance pad and stick it to other blades and repeat the testing until fan works well.
