Bansa Rose 3 Blade Ceiling Fan Light Led Integrated User Guide

3 Blade Ceiling Fan Light LED Integrated

Product Information:

The product is a ceiling fan with blades and a motor. It
requires the use of blade cushions and screws for assembly. The fan
is designed to provide air circulation and cooling in a room. It is
important to follow the instructions to ensure proper installation
and usage.

Product Usage Instructions:

1. Start by placing the blade cushions onto the blades. Make sure
   each blade has a cushion.
2. Next, lock the assembled blades to the motor using screws.
   Attach one screw at a time to each blade.
3. Attention: Never lock the screws to the motor without
   first putting the blades in place. This can cause harm to the motor
   wires inside.
4. Preparing for mounting:
   1. Switch on the ceiling fan.
   2. If you notice any shaking, immediately switch off the fan.
   3. Stick one of the balance pads to the middle of one of the
      blades.
   4. Switch on the fan again to see if there is any improvement in
      the shaking.
5. If there is no improvement in the shaking, follow these
   steps:
   1. Take off the balance pad from the previous blade.
   2. Stick the balance pad to another blade.
   3. Repeat the testing by switching on the fan to see if there is
      any improvement.
   4. Continue this process until the fan works well without any
      shaking.

place the blade cushions to the blades, lock the assembled blades to the motor by screws one by one
Attention: never lock screws to the motor without putting blades, otherwise the screws will do harm to the motor wires inside.

08
Preparing for mounting

9

10

11

12

1. switch on the ceiling fan,if shake is found, switch it off and stick one of the balance pad to the middle of one blades.switch on the fan again to see if there is any improvement.
2.If there is no improvement,take off the balance pad and stick it to other blades and repeat the testing until fan works well.