Vevor S3018 Cnc Engraving Machine Instructions

S3018 CNC Engraving Machine

Product Information

The S3018 CNC Engraving Machine is a versatile and powerful tool
that allows users to engrave various materials with precision. It
comes with a comprehensive set of parts and components for easy
assembly. The machine features a sturdy aluminum profile frame,
smooth axis for accurate movement, and a control board for seamless
operation. Additionally, it includes a spindle motor, stepper
motors, and a laser kit (optional) for enhanced functionality.

Safety Notice

• Avoid direct laser radiation on eyes or skin
• Keep the machine away from children
• Always wear protective glasses when using the machine
• Prohibited from use in flammable objects or gases
• Please cut off the power immediately in case of an
  emergency
• Shutdown steps: first cut off the power, then pull out the USB
  cable

Precautions

Please read and follow the precautions mentioned in the user
manual before assembling and using the machine.

Parts List

The following is a list of parts included in the S3018 CNC
Engraving Machine:

Component A (Already assembled)

The component A is already assembled and includes the following
parts:

Control board package

The control board package includes the necessary components for
controlling the machine:

Laser package (Optional)

The laser package is optional and includes the necessary
components for laser engraving:

Fixture35 assembly

The fixture35 assembly includes the necessary components for
securing the machine:

Machine Assembly Instructions

Follow the step-by-step instructions below to assemble the S3018
CNC Engraving Machine:

1. Start by assembling 16 sets of components for reserve.
2. Attach the aluminum profile 2020*360mm (Part No: 02) to the
   machine using screws (Part No: 24).
3. Secure the Y-bearing support seat (Part No: 18) to the machine
   using ship nuts (Part No: 28).
4. Attach another aluminum profile 2020*360mm (Part No: 02) to the
   machine.

S3018 CNC Engraving Machine

Catalog
1. Part List………………………………………………………………………2 2. Machine Assembly…………………………………………………………….3 3. Control board and Laser…………………………………………………..7 4. Candle Software……………………………………………………………7 5. Laser Grbl Software…………………………………………………………..11 6. Offline Controller ……………………………………………………….13 7. Restore factory settings………………………………………………….14 8. Online guide and video…………………………………………………..14

Scan for assembly videos

Safty Notice
Avoid direct laser radiation on eyes or skin Away from children Always wear protective glasses when use the machine Prohibited from use in flammable objects or gases Please cut off the power immediately in case of emergency Shutdown steps: first cut off the power, then pull out the USB cable

Precautions

(1). All parts description just for illustrative purpose. If there is any difference, please refer to the actual part shape. (2). Please make sure that the machine is under care when it is working. (3). If your machine is equipped with an offline controller, please note that the offline controller and the computer cannot be connected to the engraving machine at the same time, otherwise it will not work normally. (4). If the U disk in the machine kit can’t be read, please scan the QR code to see how to download the software and related content.

1/14

S3018 Ver 2.5

1.Parts List

3018 Parts List

Part No

Part Name

Explanation

01

Aluminum profile

15180*300mm

02

Aluminum profile

2020*360mm

03

Aluminum profile

2020*330mm

04

Aluminum profile

2020*220mm

05 Right angle connector

2028

06 Right angle connector

2040

07

X Smooth axis

10*400mm

08

Y Smooth axis

10*330mm

09

X Lead screw

T8*403mm

10

Y Lead screw

T8*325mm

11 Support for smooth axis

SK10

Quantity 1 5 2 2 16 2 2 2 1 1 8

Picture

A

Component

Already assembled 1 Set

12

T8 Nut (X/Y

—-

2

13

Stepper motor

42HD

2

14

Mounting for motor

3mm

15 Muff coupling (X/Y

8-5

16 X-bearing support seat Flange bearings

17

Nut support seat (Y)

T8

18 Y-bearing support seat

—-

19

Guide block (Y)

—-

20

Spring

10.5

21

Hand knobX/Y

8mm

22

Hand knobZ

5mm

23

Coverplate

—-

24

Inner hexagon screw

M5*10

25

Inner hexagon screw

M5*8

26

Inner hexagon screw

M3*6

27

Inner hexagon screw

M6*12

2 2 Set
1 1 1 4 2 2 1 6 59 4 8 10

28

Ship nut

M5-10

55

29

Trapezoidal nut

M5-20

8

30

Trapezoidal nut

M6-30

10

31

Washer

M5*1mm

32

32

Set Screw for knob

M4*5

3

33

ER11

C16-ER11-35L 5mm 1Set

34

Milling cutter

3.175

1 Set

35

Fixture

—-

4 Set

36 Inner Hexagon Wrench 2/2.5/3/4/5mm 1 Set

37

Nut Wrench

14# / 17mm

1 Set

38

Soft brush

—-

1

39

U Disk

—-

1

Component A ( Already assembled )

Part No

Part Name

Explanation Quantity Picture

A1

Guide block (X)

—-

1

A2

Guide block (Z)

—-

1

A3

T8 Nut (Z

T8*15mm

1

A4

Z Lead screw

T8*88mm

1

A5

Z Smooth axis

8*92mm

2

A6

Stepper motor

42HD

1

A7 Inner hexagon screw M3*10

4

A8

Spindle motor

775

1

A9 Inner hexagon screw M4*30

1

A10

Square Nut

M4*2.5mm

1

A11 Inner hexagon screw M3*18

4

15

Muff coupling(Z

8-5

1 Set

20

Spring

10.5

1

Control board package

Part No

Part Name

Explanation Quantity Picture

C1

Control board

VIGO

1

C2

Column

PA,M5*3

4

24 Inner hexagon screw M5*10

4

28

Ship nut

M5-10

4

C3 Stepper motor wire

4P

3

C4 Spindle motor wire

2P

1

—-

C5

Offline controller and date cable

Optional

1 Set

C6 C7
Part No L1 L2 L3

USB cable

—-

1

—-

Power supply

24V,5A

1

Laser package Optional

Part Name

Explanation Quantity Picture

Laser kit

Optional 1 Set

—-

Laser wire

3P

1

—-

Protective glass

Optional

1

Part No 35-1 35-2 35-3 35-4 35-5

Fixture35 assembly

Part Name

Explanation Quantity Picture

Pressing plate

50*20

4 PCS

Screw

M6*40

4 PCS

Screw

M6*45

4 PCS

Butterfly nut

M6

4 PCS

Washer

M6*2mm 4 PCS

35-4 35-5
35-3

35-2 35-1

S3018 Ver 2.4 S3018 Ver 2.5

2/14

2. Machine Assembly
28: Ship nut M5 -10 2PCS 05: Right angle connector
2028 1PCS

24: M5*10 2PCS Screw

31: Washer 2PCS

First assemble 16 sets of components for reserve

02Aluminum profile 2020*360 mm 3PCS

8Set

56mm

03Aluminum profile 2020*330 mm 2PCS

Step

24: M5*10 2PCS Screw
18: Y-bearing support seat 1PCS 28: Ship nut M5 -10 2PCS

Step

02Aluminum profile 2020*360 mm 1PCS

17: Nut support seat 1PCS

Step
17: Nut support seat 1PCS 10: Y Lead screw T8*325mm 1PCS

20: Spring 1PCS 12: T8 Nut 1PCS

Press T8 nut to the bottom and turn Y Lead screw at the same time

15: Muff coupling 1PCS

14: Mounting for motor 1PCS 13: Stepper motor 1PCS

o f wire

conDinreeccttiinogn

32: M4*5 1PCS
21: Hand knob 8mm 1PCS

3/14

25: M5*8 2PCS Screw 26: M3*6 4PCS Screw 28: M5-10 2PCS Ship nut
S30S13081V8eVre2r .23.5

11: Support for smooth axis 1PCS 24: M5*10 screw 2PCS
28: Ship nut 2PCS
4Set
01Aluminum profile 15180*300 mm 1PCS
30: M6-30 10PCS Trapezoidal nut

Step Step

The big

dhiorelectiisoonuotfwtahred.

19: 4PCS Guide block

The big

dhiorelectiisoonuotfwtahred.

08: Y Smooth axis 10*330mm 2PCS

27: M6*12 10PCS Screw

S3S013801Ve8rV2e.5r 2.3

Step

02Aluminum profile 2020*360 mm 2PCS

4/14

6Set
04Aluminum profile 2020*220 mm 2PCS

56mm

24:M5*10 4PCS Screw
06: 2040 1PCS 28: M5-10 4PCS Ship nut

2Set

22: Hand knob 5mm 1PCS 32: M4*5 1PCS
Component A

2Set

2Set

Step Step

12: T8 Nut 1PCS

33: ER11 1Set

20: Spring 1PCS 33: ER11 assembly

Component A

09: X Lead screw T8*403mm 1PCS
Component A

Press T8 nut to the bottom and turn X Lead screw at the same time

24: M5*10 2PCS Screw
11: 1PCS Support for smooth axis
29: Trapezoidal nut M5-20 2PCS
4Set

Step
-1.The support for smooth axis slides into the aluminum profile T-slot from the top

-2. First, fix the above two 11 (Support for smooth axis) on the aluminum profile.
-3. Then, component A and 07X Smooth axisare assembled on the 11Support for smooth axis).

07: X Smooth axis 10*400mm 2PCS
-4. Finally, assemble 07X Smooth axis, adjust component A to left-right movement is smooth, fixt the 11Support for smooth axis.
5/14

S3S013081V8eVre2r .23.5

24: M5*10 1Pcs Screw
16: X-bearing 1PCS
28: Ship nut 1PCS

23: Coverplate 6PCS

32: M4*5 1PCS
21: Hand knobX 8mm 1PCS

C1: Control board 1PCS

24: M5*10 4PCS Screw

28: Ship nut 4PCS C2: Column 4PCS
The plastic column must be assembled between the controlboard and the aluminum parts.

28: Ship nut 2PCS

25 M5*8 2PCS Screw

Step Step 11

15: Muff coupling 1PCS

13: Stepper motor 1PCS Dciroenctnieocntionfg wire

26: M3*6 screw 4PCS 14: Mounting for motor 1PCS

S3018 Ver 2.5 S3018 Ver 2.3

6/14

3. Control-Board and Laser (Laser is optional)

3.1 Instructions for control board connection

The terminal of the red dot of the spindle motor is positive, please plug in the red wire. The Motor-X/Y/Z interface on
board should be connected to the X/Y/Z motors correspondingly. The 6Pin plug is for the motor, and the 4Pin is for the control panel. Power interface connects to the power supply and USB connects to the computer. Connect the spindle motor wire according to the correct polarity.
In general, there is no need to adjust the motor driver current.
If using laser, please connect the laser to the control board with the 3pin wire. Correctly focus the laser on the materials to be engraved referring to the laser instructions below before starting engraving.

XTS05 XTS08 XTS10 Is adjustable

XTS15 Laser Is adjustable

XTS15D Laser Is fixed-focus Can’t be adjusted

Focusing Ring

Focusing Ring

18mm

Focusing Column

3.2 Instructions for laser (Optional).
Please wear the protective glasses before operating the laser! When all the connections are completed, turn on the power, and the laser is standby for working. The red light on the top of the laser is continuous lighting in this time.
Turn on the weak light and adjust the focal length (except the Fixed-Focus Laser) Please lay the materials to be engraved flat under the laser. The recommended distance from laser outlet to materials is 3~10cm. Out of range may be out of focus. Turn on the weak light. Rotate the focusing ring slowly on the laser outlet to shrink the laser spots. When the laser spot is smallest and clearest, it is the optimum state for laser engraving, then turn off the weak light. If you use the fixed-focus laser XTS15D, please use the focusing measuring column to adjust the distance between the light outlet and the engraved surface to 18mm. Note: Laser XTS05/XTS08/XTS10 have a weak light switch on top of the lasers, you also can use the switch to turn on weak light. Be sure to turn of the switch before you start laser engraving.

4. Candle Software
Candle is a GUI application for GRBL-based CNC-machines with G-Code visualizer. Candle is an open-source software suitable for CNC machine tool processing. It supports G code file processing and visual display.

7/14

S3018 Ver 2.5

Supported functions:
(1) Controlling GRBL-based CNC-machine via console commands, buttons on form, numpad. (2) Monitoring CNC-machine state. (3) Load, edit, save and send G-code files to CNC-machine. (4) Visualizing G-code files.

4.1 States Work coordinates: Represents current X, Y & Z local coordinates of the CNC. Machine coordinates: Represents current X, Y & Z absolute machine coordinates. One of following CNC status: Idle – waiting for a G-code command Running – running a G-code command Home – homing cycle is executing Check – G-code command check mode is turned on Hold – paused by a “!” command, need to be restarted by a “~” command Alarm – CNC doesn’t know where it is and blocks all G-code commands Door – door sensor has triggered
4.2 Control
Home button Starts the homing cycle procedure with “$H” command
Z-probe Starts the zero Z-axis search procedure using the command specified in the settings (“Z-probe commands” box). Example command: G91G21; G38.2Z-30F100; G0Z1; G38.2Z-1F10
Zero XY Zeroes the “X” and “Y” coordinates in the local coordinate system. Also retains an local system offset (“G92”) for later use.
Restore XYZ Restores local system coordinates with “G92” command.
Safe Z Moves tool by “Z”-axis to safe position. Position coordinate can be specified in the “Safe Z” setting. Position must be specified in machine coordinates. Reset Resets CNC with “CTRL+X” command
Unlock Unlocks CNC with “$X” command.
4.3 Software using steps
(1). Install the driver For the first time use, please connect the device to the computer via USB cable, and click the CH341SER.exe file in the
driver folder to install the driver. Under normal circumstances, the Win10 system will automatically identify and install the driver. For Win7 and Win8 systems, please install it manually.

(2) Set the port and connection
After installing the driver, open the device manager of the computer and click on the port option to see the content inside the red box on the screen shown in the figure below (the port information is in brackets).
Remember the port information queried above, switch to the Candle software interface and click the “Settings” option in the upper left corner. Selecting the setting will pop up the setting window. Under “Connection”, select the port name you queried, select the baud rate 115200, and then click the “ok” to finish the setting.

S3018 Ver 2.5

8/14

(3). Complete connection After setting the port and baud rate, click Finish. The
status bar at the top right of the Candle interface will show Idle, and at the same time, the console at the bottom right will display the information shown below, indicating that the connection has been successfully established.
(4). Processing documents Click “File” option at the top of candle, then click “New” to create G-Code. On the command bar at the bottom of the interface, click “Open” to select a G code file that has been made to import the file. After importing, the middle of the interface will display a visual graph composed of tool paths (the position of the pen-shaped graph in the graph is the current tool position). In the visualization window, hold down the left mouse button to move to rotate the graph, and hold down the right button to move. Graphics, scrolling the middle wheel can zoom in and out of the graphics. At the same time, the content of the G-Code will be displayed in the lower command bar. During processing, the machine will run one by one according to the G-Code commands.

9/14

S3018 Ver 2.5

(5). Fixture, tool installation and Set the working coordinate origin

The fixture in the product kit is not assembled. There are four sets in total. The appearance and usage of the assembled fixture are shown in the right figures.

Before running the G code program, you need to find the position of the engraving figure relative to the overall engraving plate. There is a three-axis coordinate system in the visual graphics. The origin of the three-axis coordinate system is the tool setting point of the actual processing graphic.

You can move the tool to determine the position of the engraving graphic relative to the overall engraving plate based on the position of this origin. The engraving figure in the figure below is taken as an example.

After the selected tool position is started, the X/Y and Z axes are reset to zero (the

are zeroing X/Y and Z axes

buttons). Before returning to zero, make sure that the tool approaches the distance of one sheet of paper for engraving,

and then return the X/Y and Z axes to zero (please use a flat-bottom sharp knife when engraving, and use a cylindrical

milling cutter when machining planes, slots, and holes) The effect is that the sculpted figure will be carved with the

blade tip as the origin.

The ER11 collet on the spindle motor should be clamped into the fixed head first, and it must be clamped in place. When installing the cutter, please do not extend the collet too much, as shown in the first figure below.

(6) Start carving After finding the engraving position, click the send button below and the device will automatically start engraving.
The status bar at the top right shows running. The visualization window shows that the tool is moving along the tool path. You can choose the pause and stop buttons below when engraving. (After pausing, click again to continue the previous carving. After termination, click Send to start processing from the beginning).
(7). Finished processing After the processing is completed, the visualization window prompts that the engraving is completed and the time
required for carving.

S3018 Ver 2.5

10/14

5. Laser GRBL software
Laser GRBL is an excellent and practical opening source controls software in the field of laser engraving. Compared with similar software, it has a simple interface, simple operation, and supports multiple languages. There are a lot of learning resources used on the Internet, which is convenient for beginners to understand and master the software. Mastering a laser engraving software is the basic condition for using laser engraving machine. It is recommended that beginners first learn the operation method of the software online before using it to prevent damage to the laser engraving machine and surrounding items by improper operation.
5.1 Download and installation Download from Laser GRBL official website or find in the USB-disk contains two files:
(1) CH341SER.EXE, USB driver Unzip the package and find the file CH341SER.exe. Double-click to install, the user needs to install this driver when running the software for the first time. (2) LaserGRBL, software locate the file (install.exe) in the archive, double-click it to install it.
5.2 Online operation steps Online operation is the operation of controlling the device through software after the device is connected to the
computer.
(1). Connect the device to the computer with a USB cable.
(2). Place the material to be engraved in the working area of the engraving machine. Turn on the weak light, focus by rotating the laser focus knob until the spot becomes smallest and clearest, then the focus is complete.
(3) Open the Laser GRBL software, select the COM port (except COM1, you can plug and unplug the USB cable to see which one is) and the baud rate (generally set to 115200), then click the connection, the color of the button will become darker after the connection is successful (if Click the connect button and the color does not become darker. You can unplug the USB cable and plug it in again.)
(4). After the connection is successful, click “File” on the menu bar of the interface to enter the selection file interface, select “Open File”, import the picture to be engraved, etc.

(5). Select the file to be engraved, click “Open”, the “Input Raster Image”dialog box will pop up. Here is the setting engraving mode and some other engraving parameters. Click “Next” after setting.
(6). Click “Next” to pop up the “Target Image” dialog box, where you can set the engraving speed, minimum power and maximum power and the length and width of the image to be engraved and offset. Click “Create” after setting.

11/14

S3018 Ver 2.5

(7). After clicking “Create”, enter the preparation for engraving.
Move to the position you want to engrave, click the “Position” button (the position where the laser head is located at the lower left corner of the engraved pattern), set the number of times to be engraved, and click the “Start Engraving” button to start the engraving. After the engraving is completed, the machine returns to the zero position.
5.3 About Engraving effect
In general, the use of relatively high power, the engraving depth is relatively deep, but due to the focal length, it will be less detailed than the low power. Small power engraving is shallow but very fine. When engraving, you can adjust the power, engraving speed, and moving speed for better results. In addition, when the speed is slow, it can be cut, but if the edge is not fine and the degree of burning is obvious, you can try to adjust the speed and repeat the engraving several times to achieve better results. If it is cutting, please adjust the speed as appropriate to achieve the cutting effect. If it is engraving, please adjust the parameters such as power and speed according to the depth of engraving.
5.4 FAQ
Q: What’s the difference between different power levels?
The higher the power, the greater the luminous energy of the laser head, the higher the temperature of the material hit, the harder the material of the material that can be engraved, and even the full cutting can achieve the cutting effect. If cutting, it is recommended to choose high power; if it is required to engrave shallower, more delicate, it is recommended to choose low power.
Q: Which formats are supported?
Support all formats of images, support GCODE, NC files and so on. If you want to engrave .DXF file, we recommend the LightBurn software.
Q: Whether to support the grayscale engraving function
Supports the grayscale engraving function, which can engrave pictures and photos of different shades of color by controlling the intensity of the laser according to the color depth of the image.
Q: What is the reason why the engraved picture is very light?
Quality: ** line / mm, generally set to 10 lines / mm, the larger the value, the darker the color, the set according to your needs Engraving speed: the moving speed when the laser is turned on, the faster the speed is engraved the shallower. Minimum maximum power: The general minimum power is set to 0 and the maximum power is set to 1000. The greater the maximum power, the deeper the engraved color.
Q: Why does the fan of the laser module not turn?
Please confirm that the laser head is working properly. If the laser head does not work, there may be a bad contact of the power supply line of the laser head; if the laser head works normally, the fan may be broken.
Q: What is the reason for the software connection failed?
Please confirm whether the USB interface is in contact with normal. Please confirm whether the COM port is selected correctly (do not select COM1); please confirm whether the baud rate is selected correctly (select 115200).
Q: How long does it take to engrave a picture?
The length of time required for engraving depends mainly on the speed of the engraving, the speed of the idling, and the size of the picture. Users can view the total time spent on the software or on the progress bar on the touch screen.

S3018 Ver 2.5

12/14

6. Offline controller (Optional)
Note: The offline controller and the computer cannot be connected to the engraving machine at the same time. When
using the offline controller, please make sure that the USB cable of the machine and the computer is disconnected. The off-line controller has an external 12V standby power supply interface. When users use other mainboards with no power supply and weak power supply capacity, they can connect an external power supply to supply power to the controller.

6.1 Main page: Y-: right Y+: left Z+: Send $X to the GRBL motherboard to unlock it. OK/SPN: Confirm button.

6.2 Control page: Manually move each axis to the desired position. X+: X axis move right direction, X- opposite. Y+: Y axis move forward direction, Y- opposite. Z+: Z axis move up direction, Z- opposite. OK/SPN: Spindle test switch, press to open the spindle (corresponding to SPN gray on the screen), press again to close the spindle (the corresponding SPN on the screen returns to normal). Long press to enter changing spindle speed page. At this page, Y+/Y- is High/Low spindle speed, long press OK/SPN to exit the changing spindle speed page. Exit/STP: Function 1: Tap on each axis button of XYZ to change the movement distance by 0.1, 1, 5, 10 cycles each time. Function 2: Press and hold for about 2 seconds to exit.

Turn on the laser mode for laser engraving Turn off the laser mode for CNC tools carving

6.3 File page: File list Select the file to be engraved. Support documents include: NC, NCC, TAP, TXT, Gcode, GCO, NL, CUT, CNC . Y+: up, Y-: down OK/SPN: Confirm the selection and enter the confirmation engraving page.

6.4 Confirm the engraving page: Confirm that the engraving file is started without errors. OK/SPN: Confirmation starts, ready to print becomes the progress display percentage, the file selection page is returned after the engraving is completed.

6.5 Settings page: X+/ X-: Chang Baud rate; Y+/Y-: Change Feed rate by ±100/Click; Z+/Z-: Change Feed rate by ±10/Click; OK/SPN: Change Laser Mode ON/OFF

6.6 Wi-Fi Network and Web The offline controller has WiFi wireless network function. By default, the WiFi hotspot of VIGO-STK**** is automatically established. You can connect to the hotspot through the WiFi of your computer or mobile phone with password 12345678, and then open 192.168.0.1 or vigostick.local in browser to manage (upload or delete) the files in SD card of the offline controller or control the machine to carve instead of the controller’s buttons and screen, and you can also enter the SSID (Only support 2.4G signal) account and password to help the offline controller access your local WiFi network. After the controller is connected to the local 2.4G WiFi, the current IP address of the controller or the domain name
13/14

S3018 Ver 2.5

vigostick.local can still be opened to enter the web management interface. You can open About page of the controller to check the IP address. Network status: There is a dot in the upper left corner of the main page. The RED dot indicates that VIGO-STK**** hotspot is active, and the GREEN dot indicates that the controller has connected to Local WiFi. The web management interface is as previous page.
The web pages functions as follows: Click the menu “Control”, the MOVE Control interface appears, you can click the corresponding button to control the CNC machine movement. Click the menu “File”, shows the carving files currently stored in the SD card of the current offline controller. You can upload new files to the controller. After selecting the corresponding carving file to start the carving, the interface displays the file being carved and the carving progress. You can click the button to pause or stop the carving process. Click the menu “Settings”, enter the carving machine setting interface, where you can set some control parameters, or perform reset, unlock, restore settings, tools setting, turn on/off laser mode and other commands.
6.7 Laser Engraving App The offline controller support mobile laser engraving App (For Android and iOS). Before using the App, please turn on the laser mode in settings of the controller. Please get the VevorWorks App form our website www.VevorEngraver.com ,or scan the right QR-code to download.
App supports Android and IOS. It can import mobile phone pictures, take photos with mobile camera, edit graphics and text, generate engraving content, support gray, black and white, contour and other engraving modes, and control engraving in real time.
7. FAQ
Q: How to use the lasers A: 1. For XTS05/XTS08/XTS10/XTS15 laser, please place the material flat under the laser, and make the distance between them within 3~10cm (Less distance will not be able to focus). Turn on the weak light, then there will be a light spot on the material, just turn around the focus ring on laser to adjust the spot become smallest and clearest, which means the best focus. 2. XTS15D laser is fixed focus laser which is not adjustable. The fixed focal Length is 18mm. Please use the focusing column to determine the distance from the engraved object to the top surface of copper ring of light outlet. Q: Laser module can’t burn anything, no light, weak power. A: 1. Please check power, speed setting on software and adjust focus length for laser [refer to 3.2 above to adjust focus]. Q: The picture engraved is the opposite of the original picture A: Just need to adjust on software [ Reversal X/Y axis] Q: The picture engraved distortion. A: The screw rod and motor shaft are not locked and slipping.
8. Restore factory settings
If the mechanical movement of the machine is smooth, but the engraving movement appears stuck, or the stepper motor does not move, please try to restore the factory settings of the main-board.
Method : Run Candle software and send command $RST=* to the machine, then reboot the machine.
9. Assembly video and online guide
Please scan the QR code below to watch the machine assembly video. If the U disk in the machine kit can’t be read, please scan the QR code to see how to download the software and related documents.

S3018 Ver 2.5

14/14

Powered by VEVOR 2022

References

• VEVOR
• VEVOR