BEGA 50574 Ceiling and Wall Luminaire
Product Information
- Lamp Luminaire with screw base E 27
- Lamp output max. 100 W
- This product contains light sources of energy efficiency class E
- Luminaire efficiency: 78.5%
- Detailed technical and lighting data for the lamps can be found in the data sheets on our website
- Safety: The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
- Important: If the luminaire is to be mounted onto a metallic, electroconductive surface, it is mandatory to make sure that the mounting surface is connected conductive to the earth conductor of the luminaire!
- Luminaire with trim ring: Before installing onto the mounting surface, the luminaire housing must be inserted into the trim ring (accessory).
- Optional metal trim rings in 3 surfaces are available as accessories and must be ordered separately:
- Edelstahl (Stainless steel) – Bestellnummer (Part. No): 13 183
- Aluminium poliert (Polished aluminium) – Bestellnummer (Part. No): 13 184
- Messing (Brass) – Bestellnummer (Part. No): 13 185
- Spares:
- Spare glass – Part. No: 11 003 413
- LED-leuchtmittel 2700 K (LED lamp 2700 K) – Part. No: 40R G 13 565
- LED-leuchtmittel 3000 K (LED lamp 3000 K) – Part. No: 13 592
- Fassung (Lampholder) – Part. No: 63 000 339
Product Usage Instructions:
- Dismantle the mains supply cable.
- Unscrew the glass from the luminaire housing by turning it counter-clockwise.
- Push silicone sleeves over the lines.
- Make the earth conductor connection and the electrical connection.
- Fasten the luminaire housing with the supplied fastening material or other suitable fastening material to the mounting surface.
- Insert the lamp into the lampholder.
- Fix the glass to the luminaire housing by turning it clockwise.













