HG-WMTZXL-2624 21.6 Inch Modern White Indoor Star Decor Shade
Product Information
This product is a portable Bluetooth speaker that allows you to
play music wirelessly from your smartphone, tablet, or other
Bluetooth-enabled device. It has a rechargeable battery that
provides up to 8 hours of playtime and can be charged using the
included micro-USB cable. The speaker also has a built-in
microphone for hands-free calling and a 3.5mm aux input for
non-Bluetooth devices.
Usage Instructions
- Charge the speaker using the included micro-USB cable before
first use. - Turn on your Bluetooth-enabled device and enable Bluetooth
pairing mode. - Press and hold the power button on the speaker until the LED
light flashes, indicating it is in pairing mode. - Select the speaker from the list of available Bluetooth devices
on your device. - The LED light will turn solid blue once the speaker is
connected to your device. - You can now play music wirelessly through the speaker from your
Bluetooth-enabled device. - To answer a call, press the phone button on the speaker. To end
the call, press the phone button again. - If you want to play music from a non-Bluetooth device, connect
it to the speaker using a 3.5mm aux cable. - To turn off the speaker, press and hold the power button until
the LED light turns off.
1.When installing, first cut off the power supply and determine the installation plan and the weight of the ceiling. 2.Drill the mounting holes into the ceiling according to the mounting holes of the hanging plate, insert the expansion rubber plug, and fix the hanging plate to the wall with self-tapping screws. Ensure that the external power cord passes through the lamp body entry hole and that the installation is secure. (Figure 1) 3.Connect 110V mains to one end of the terminal block, connect the fire
wire to L, and connect the neutral wire to N. Pay attention to the wire contact when wiring, and the copper wire at the end is not exposed. (Figure 2) 4.Fix the hanging plate to the ceiling, move the lamp body to the ceiling, align with the hole of the hanging plate, and screw it into the screw. (Figure 3) 5.After confirming that the installation is correct, the power can be turned on for normal use. (Figure 4) LED maintenance instructions: 1. When replacing the light source, please be sure to turn off the power to avoid electric shock or impact damage to LEDs and electrical appliances. 2.Please make replacements according to the model on the LED light source board. When wiring, distinguish the positive and negative polarity, and check if the fixing screws are missing and the gasket is short-circuited. 3.The light source in this luminaire is replaced by the manufacturer or its service agent or a person of similar qualification. Remote control activation instructions: If the remote control cannot control the luminaire, you need to activate the remote control. Activation method: Turn on the luminaire power switch and press the fan switch key and strong wind button within 5 seconds. After you hear the drip, release it.
