immedia 2Move Transfer Board
Product Information
The product is called 2Move and it is a medical device intended
for use in transferring users between two beds or from a bed to an
operation table, stretcher, X-ray or hygiene table, etc. It is
suitable for use in acute care, long-term care, and home care
environments. The product complies with the standards applicable
for Class 1 products in the Medical Device Regulation (EU) 2017/745
on medical devices. The expected service life of the device is 1 to
2 years under normal use and it has a two-year warranty on material
and manufacturing defects.
Product Usage Instructions
- Before using the product, read the instruction manual carefully
to avoid accidents and injury when moving and handling the
products. - The person described as the user in this manual is the person
who is lying or sitting on the product. The carers are the people
who manoeuvre the product. - Position the 2Move incl. nylon cover and/or tube foil under the
user by rolling the user slightly away from the direction of
movement, preferably using an absorbent sheet. - Place 2Move under the user after which the user is rolled
back. - Be careful to position the user’s head and legs onto the
board. - If possible, cross the user’s legs so that the leg that is
closest to the board is lowest with the other leg crossed over
it. - 2Move should only be placed a few inches under the user.
Note: If there are any doubts regarding the usage of the
product, please contact Etac. If adjustments, repairs or
combinations not predetermined by Etac are made, the Etac CE
certification and Etac warranty will not be valid.
Instruction for use
IMM1018_IFU.Version11.2021-12-08
2Move
Index
Illustrations ……………………………………. 3 User manual English ……………………. 4 Bruksanvisning Svenska………………. 9 Bruksanvisning Norsk …………………14 Brugervejledning Dansk………………19 Käyttöohjeet Suomi…………………….24 Gebrauchsanweisung Deutsch ……29 Gebruiksaanwijzing Nederlands…..34 Instruction d’utilisation Francais….39 Istruzioni per l’uso Italiano ………….44 Instrucciones de uso Español ……..49
See www.etac.com
2
3
ES
IT
FR
NL
DE
FI
2
1
DA
NO
SV
GB ILL.
Illustrations
General
Thank you for choosing an Etac product.
To avoid accidents and injury when moving and handling the products, please read this manual carefully.
The person described as “the user” in this “Instruction for Use” is the person who is lying or sitting on the product. The carers are the people who manoeuvre the product.
This symbol appears alongside the text in the manual. It draws the reader’s attention to points at which there may be a risk to the health and safety of the user or carer.
These products comply with the standards applicable for Class 1 products in the Medical Device Regulation (EU) 2017/745 on medical devices.
At Etac we strive to continually improve our products and therefore we reserve the right to make changes to products without prior warning. All measurements given on illustrations and similar material are for guidance only and Etac cannot be held liable for errors and defects.
The information given in this manual, including
Symbols in general
recommendations, combinations and sizing, does not apply to special orders and modifications. If the customer makes adjustments, repairs or uses combinations not predetermined by Etac, the Etac CE certification and Etac warranty will not be valid. If in doubt, please contact Etac.
Warranty: Two-year warranty on material and manufacturing defects, provided that the product is used correctly.
Expected lifetime: The device has an expected service life of 1 to 2 years under normal use. The service life of the device varies depending on usage frequency, loads and how often and how it is washed.
For further information on the Etac transfer range, see www.etac.com.
In case of an adverse event occurred in relation to the device, incidents should be reported to your local dealer and the national competent authority in a timely manner. The local dealer will forward information to manufacturer.
Washing Do not bleach
Disinfect / Wipe off Never leave on the floor
Warning
Production year, month and day
Manufacturer CE -certification
Tumbledry
Risk of sliding down
Iron
Keep out of the sun
Do not dryclean
Read the user manual
Medical device
Intended use For use in transferring users between two beds or from a bed to an operation table, stretcher, X-ray or hygiene table, etc.
Batch no./Lot no.
User mass limit = maximum rated load
The product can be scrapped according to national regulations
Keep dry Non sterile Article number
Intended environment Acute care, Long-term care, Home care.
4
GB ILL.
S V
Practical handling
Positioning
2Move incl. nylon cover and/or tube foil is positioned under the user by rolling the user slightly away from the direction of movement, preferably using an absorbent sheet. 2Move is positioned under the user after which the user is rolled back.
2Move should only be placed a few inches under the user. Position the user’s head and legs carefully onto the board. If possible, it is helpful to cross the user’s legs so that the leg that is closest to the board is lowest with the other leg crossed over it.
Use
By applying a little pressure to the shoulder and hip, the carer can move the user over onto the other bed. If a sheet is used, it is a good idea to position 2Move underneath the sheet. Positioning then takes place as described above, but using the sheet to pull on (Illustrations 1 and 2). 2Move can easily be removed by sliding 2Move out from under the user: The carer places one hand over the board and the other under it. Then, the carer eases the nylon material away with the upper hand while pulling towards him/herself with the lower hand.
2Move can also be removed by first removing the board from the cover and then removing the cover by pulling on the lower
layer of the cover.
N O
D A
F I
D E
N L
F R
I T
E S
5
Notice
Special features
Always check the product before use and after washing.
Never use a defective product. If the product shows signs of wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual handling. Etac offers advice and training for carers. For further information, contact Etac.
Always use the correct manual handling techniques.
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual handling is smooth, always plan the manual handling in advance.
There is a risk that the user may slide off. Never leave the user alone on the edge of the bed.
Never leave the product on the floor.
Always conduct a risk assessment, and ensure that the assistive product can be used for the individual user and, in combination with other devices, that it is safe for the user and carers. Distance and max user weight.
max 20 cm
max15 cm
max 10 cm
If in any doubt – please contact Etac.
Material and cleaning
Material: 2Move Transfer Board: Plastazote
2Move Transfer Board Cover: Cover: Nylon Cover disposable: Polyethylene.
The product should be checked regularly, preferably each time it is used.
Check that seams and fabric are not damaged.
Never try to repair a product yourself. Never use a defective product.
Washing instructions: 2Move Transfer Board: Can be wiped off with disinfectant. 2Move Transfer Board nylon Cover: Do not use fabric softener. This product can be wiped off with soapy water or cleaned with a solvent-free cleaning agent with a pH level between 5-9, or a 70% disinfection solution.
6
GB ILL.
S V
N O
Products and accessories
Article no.
IM8050095 IM8050190 IM8070190 IM8150190 IM4034 IM4035 IM4036 IM4047 IM4048 IM4049
Product Description
2Move Transfer Board S 2Move Transfer Board L 2Move Transfer Board XL 2Move Transfer Board L Non-Foldable Cover Disposable L Cover Disposable S Cover Disposable XL 2Move Cover S 2Move Cover L 2Move Cover XL
Set
Article no. IM4318 IM4319 IM4320 IM4321
Product Description 2Move L set. Incl. IM8050190 + IM4048 2Move S set. Incl. IM8050095 + IM4047 2Move L Non-Foldable set. Incl. IM8150190 + IM4048 2Move XL set. Incl. IM8070190 + IM4049
Combinations
Article no. IM4041
Product Description 2Move Display
Size (mm) W490xL950 W490xL1900 W700xL1900 W490xL1900 W600xL2100 W600xL1000 W800xL2100 W515xL790 W515xL1610 W715xL1610
Size (mm)
Size (mm) W530xL210xH230
D A
F I
D E
N L
F R
I T
E S
7
Service information
Inspection
First inspection: · Is the packaging intact? · Read the label on the packaging and check the article no. and product description · Check that Short Instruction is enclosed updated User Manual/Instruction for use can be downloaded from www.etac.com or contact your Etac
Customer Service or the local dealer. · Check the label on the product – does it include article no., product description, lot/batch no., cleaning instructions and supplier name?
Periodic Inspection: · Make sure that your Manual transfer system always is in a perfect condition. · After wash always check materials, stitching, handles, buckles. · If the product shows signs of wear and tear, it must be removed from service immediately.
Visual inspection/Check the product: Ensure that the materials, seams, stitching, handles, buckles are intact/faultless.
Mechanical load or stress/Test handles: Draw hard in the handles in opposite directions and control the material, seams and stitching. Test buckles: Lock the buckle and draw in opposite directions, control the buckle and the stitching.
Check: Manual transfer aids with handles, straps and buckles:
Stability test: Try to bend the product verify that it feels firm, stable and solid.
Test low/high friction: Place the product on a firm surface or a bed, place your hands on the material and test the friction by pushing your hands down into the product. Low friction slides effortlessly High friction no sliding/moving
Manual transfer aids with for sitting and lying transfer and with high or low friction:
Production year, month and day
The product can be scrapped in accordance with national regulations
Read the user manual
8
