Senao Networks Inc Pce2310m Wifi 6 User Manual

PCE2310M WiFi 6

Product Information: WiFi 6 ax1800 2×2 dual concurrent M.2 B
key Module

The PCE2310M module is designed to replace the ancient ac1200
dual concurrent PCIE module with M.2 B key, which can be applied on
SDWAN devices for networking with client devices via wireless. The
M.2 B key design is also compatible with existing 5G module slots.
The module has a radio of MTK MT7915DAN and a main chip of 2.4GHz
Transceiver + iPA 5GHz Transceiver + iPA (MTK MT7975DN MTK
MT7975DN). The max power consumption is around 7.51W, and the
dimensions are 52 x 30 x 0.8 mm / 4 layers.

Hardware Design Specification

SKUs: PCE2310M
Radio: MTK MT7915DAN
Main Chip: 2.4GHz Transceiver + iPA 5GHz Transceiver + iPA (MTK
MT7975DN MTK MT7975DN)
Zero Wait DFS: N/A
2.4GHz FEM: N/A
5GHz FEM: N/A
RF components: WIPS FEMs 2.4GHz Filter: N/A DEA202450BT-3030A1 x 2,
5GHz Filter: DEA165550BT-2230C2-H x 2, Diplexer (2.4GHz/5GHz): ACX
DP1608-A2455BKT

WiFi Specification (2.4GHz/5GHz)

Based on the transmit power (Tx) and receive sensitivity (Rx)
specifications of MT7975DN, the Tx power from chips is concluded
and the Rx specification is summarized in the following table:

Support Driver

PCE2310M is an integrated module on the customer’s system board.
The selected SDK or driver would be discussed and negotiated first.
According to initial validation from Seano, this module has been
successfully brought up on existing NXP and AMD platforms.

Compliant Regulatory

The planned certification domain would be covered following
regulatory:

Tier 1 Compliant Regulatory

Product Usage Instructions

The PCE2310M module is intended for OEM integrators and is
responsible for the compliance to all the rules that apply to the
product into which this certified RF module is integrated.
Additional testing and certification may be necessary when multiple
modules are used.

Warning Statements

• Increase the separation between the equipment and
  receiver.
• Connect the equipment into an outlet on a circuit different
  from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
  help.

CAUTION: Any changes or modifications not
expressly approved by the grantee of this device could void the
user’s authority to operate the equipment.

RF Exposure warning: This equipment must be
installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.

User Manual
Product Name: WiFi 6 ax1800 2×2 dual concurrent M.2 B key Module Model Name: PCE2310M FCC ID: U2M-PCE2310M
1. Hardware Design Specification
PCE2310M module had been designed to replace ancient ac1200 dual concurrent PCIE module with M.2 B key which would be applied on SDWAN devices for networking with client device via wireless. M.2 B key design would also be compatible with existing 5G module slot.

1.1 Major Components
SKUs

PCE2310M

Radio

MTK MT7915DAN

Main Chip

2.4GHz Transceiver +iPA 5GHz Transceiver +iPA

MTK MT7975DN MTK MT7975DN

Zero Wait DFS

N/A

2.4GHz FEM

N/A

5GHz FEM

N/A

RF components

WIPS FEMs 2.4GHz Filter

N/A DEA202450BT-3030A1 x 2

5GHz Filter

DEA165550BT-2230C2-H x 2

Diplexer (2.4GHz/5GHz)

ACX DP1608-A2455BKT

1.2 WiFi Specification (2.4GHz/5GHz) Based on the transmit power (Tx) and receive sensitivity (Rx) specifications of MT7975DN, we conclude Tx power from chips and summarize Rx specification as the following table.

Radio

2.4GHz

Data Rate

574Mbps

Available Bandwidth

20/40MHz

Adopted FEM

iPA

Available frequency

2412­ 2483.5MHz

Transmit Power @ antenna port

13-18dBm

Receive Sensitivity

-59~-88dBm

1.3 Power Consumption The max power consumption is around 7.51W.

PCB Dimensions/Layers.

5GHz 1201Mbps 20/40/80MHz
iPA 5150-5850MHz
12-18dBm -57~-86dBm

PCE2310M

Dimension/Layer

52 x 30 x 0.8 mm / 4 layers

1.4 Support driver PCE2310M is an integrated module on customer’s system board. The selected SDK or driver would be discussed and be negotiated firstly. According to initial validation from Seano, we successfully brought up this module on existing NXP and AMD platform.

1.5 Compliant Regulatory

The planned certification domain would be covered following regulatory.

1.5.1 Tier 1 Compliant Regulatory

Countries/Regions RF Standards

EMC Standards

Safety Standards

OET Bulleting 65/Part 2.1093

USA

FCC Part 15.247

FCC Part 15, Subpart B Class B N/A

FCC Part 15.407

EN 300 328 v2.2.2

CISPR 32:2012

EN 300 440

EN55032:2012

EU

EN 301 893 v2.1.1

CISPR 24:2010

N/A

EN 50385: 2017

EN55024:2010

EN 301 489-1/-17 v3.1.1

EN55035

2. Warning statements
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used.
RF Exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
USERS MANUAL OF THE END PRODUCT In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT The final end product must be labeled in a visible area with the following ” Contains FCC ID: U2M-PCE2310M “.
This radio transmitter FCC ID: U2M-PCE2310M has been approved by FCC to operate with
the antenna types listed below with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.

Antenna List

No. Manufacturer Part No.

Antenna Type

1 AWAN

A8EEE-000001 Dipole

WHITE

Note: The antenna connector is SMA Male type.

Peak Gain 3.23 dBi for 2.4 GHz 5.22 dBi for 5GHz