Ttcombat Ttscw-sfu-127 Elmor Skylevel Legs Low Instruction Manual

TTSCW-SFU-127 Elmor Skylevel Legs Low

Product Information:

The product is the TTSCW-SFU-127 ELMOR, specifically the
Skylevel Legs Low variant. These low legs are designed to replace
the standard legs on the low straight roads.

Product Usage Instructions:

1. Refer to the series of icons provided throughout the
   instructions to assist with assembly. If you are unsure, scroll
   ahead to confirm.
2. Do not glue the specified part.
3. Carefully score and fold the specified part.
4. The specified part or its placement is optional and not
   required for assembly.
5. Pay close attention to this step as the process order or
   specific part used may be important.
6. Repeat the construction of a specific part according to the
   specified number of times.
7. The next instruction step will be the same assembly as before,
   but from a different angle.
8. A sub-assembly is complete. This smaller construction is ready
   to be added to the main kit.
9. Assembly is complete! There may be additional optional parts,
   so make sure to check the instructions until the very end.
10. CAUTION: Fragile! Do not bend. The bendy wood is designed to
    curve around a specific frame only.
11. Replace the standard legs on the low straight roads with the
    low legs provided.
12. Continue following the assembly instructions.
13. Continue following the assembly instructions.
14. Continue following the assembly instructions.
15. Continue following the assembly instructions.
16. Connectors should be used to replace the standard legs on the
    low straight roads.

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
2
These are a series of icons that may be used throughout the instructions to help your assembly. If in doubt, scroll ahead to confirm.

Do not glue this part

Carefully score and fold this part

This part – or its placement is completely optional

Look closely at this step The process order or part
used, may be specific

Repeat making this part the specified number of times

The next instruction step will be the same assembly so far, but from a different
angle

Sub-assembly complete. This smaller construction
is ready to add to the main kit

Assembly Complete! There could be more optional
parts – check to the very end of instructions

FRAGILE: DO NOT BEND. “Bendy wood” is designed to
curve around a designed frame only.

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
3

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
4

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
5

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
6

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
7

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
8

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
9
Low legs replace the standard legs on the low straight roads

10

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
11

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
12

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
13

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
14
4

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
15
Connectors replace the standard legs on the low straight roads

TTSCW-SFU-127 ELMOR:
Skylevel Legs Low
16