Ttcombat Ttscw-sfu-121 Elmor Low Corner Instruction Manual

TTSCW-SFU-121 ELMOR Low Corner

Product Information

Product Name: TTSCW-SFU-121 ELMOR: Low
Corner

Product Usage Instructions

1. These are a series of icons that may be used throughout the
   instructions to help with assembly. If in doubt, scroll ahead to
   confirm.
2. Do not glue this part.
3. Carefully score and fold this part.
4. This part or its placement is completely optional.
5. Look closely at this step. The process order or part used may
   be specific.
6. Repeat making this part the specified number of times.
7. The next instruction step will be the same assembly so far, but
   from a different angle.
8. Sub-assembly complete. This smaller construction is ready to
   add to the main kit.
9. Assembly Complete! There could be more optional parts – check
   to the very end of instructions.
10. FRAGILE: DO NOT BEND. Bendy wood is designed
    to curve around a designed frame only.
11. Recommended not to glue the highlighted part in place to allow
    easy removal to add Skylevel legs.
12. Feet will fit loosely within the tab holes. Glue to the long
    strips, not feet.
13. Recommended to glue the highlighted part to the support plate,
    not leg tabs. This allows for legs to be easily removable for the
    Skylevel leg kits.
14. The second version will be mirrored. See next step.

TTSCW-SFU-121 ELMOR:
Low Corner

TTSCW-SFU-121 ELMOR:
Low Corner
2
These are a series of icons that may be used throughout the instructions to help your assembly. If in doubt, scroll ahead to confirm.

Do not glue this part

Carefully score and fold this part

This part – or its placement is completely optional

Look closely at this step The process order or part
used, may be specific

Repeat making this part the specified number of times

The next instruction step will be the same assembly so far, but from a different
angle

Sub-assembly complete. This smaller construction
is ready to add to the main kit

Assembly Complete! There could be more optional
parts – check to the very end of instructions

FRAGILE: DO NOT BEND. “Bendy wood” is designed to
curve around a designed frame only.

TTSCW-SFU-121 ELMOR:
Low Corner
3

TTSCW-SFU-121 ELMOR:
Low Corner
4

TTSCW-SFU-121 ELMOR:
Low Corner
5
Recommended to not glue highlighted part in place to allow easy removal to add Skylevel legs

TTSCW-SFU-121 ELMOR:
Low Corner
6

TTSCW-SFU-121 ELMOR:
Low Corner
7

TTSCW-SFU-121 ELMOR:
Low Corner
8

TTSCW-SFU-121 ELMOR:
Low Corner
9
Feet will fit loosely within the tab holes. Glue to the long strips, not feet

TTSCW-SFU-121 ELMOR:
Low Corner
10
Recommended to glue the highlighted part to the support plate, not leg tabs. This allows for legs to be easily removable
for the Skylevel leg kits.

TTSCW-SFU-121 ELMOR:
Low Corner
11
Recommended to glue the highlighted part to the support plate, not leg tabs. This allows for legs to be easily removable
for the Skylevel leg kits.

TTSCW-SFU-121 ELMOR:
Low Corner
12

TTSCW-SFU-121 ELMOR:
Low Corner
13

TTSCW-SFU-121 ELMOR:
Low Corner
14

TTSCW-SFU-121 ELMOR:
Low Corner
15

TTSCW-SFU-121 ELMOR:
Low Corner
16

TTSCW-SFU-121 ELMOR:
Low Corner
17

TTSCW-SFU-121 ELMOR:
Low Corner
18
The second version will be mirrored. See next step

TTSCW-SFU-121 ELMOR:
Low Corner
19

20

TTSCW-SFU-121 ELMOR:
Low Corner

TTSCW-SFU-121 ELMOR:
Low Corner
21

22

TTSCW-SFU-121 ELMOR:
Low Corner

TTSCW-SFU-121 ELMOR:
Low Corner
23

24

TTSCW-SFU-121 ELMOR:
Low Corner

TTSCW-SFU-121 ELMOR:
Low Corner
25