Ttcombat Ttscw-sfu-124 Elmor Skylevel Legs High Instruction Manual

TTSCW-SFU-124 Elmor Skylevel Legs High

Product Information:

The TTSCW-SFU-124 ELMOR is a product that includes Skylevel Legs
High. It comes with a set of instructions that may include icons to
assist with assembly. Some important notes from the user manual
are:

• Do not glue certain parts.
• Carefully score and fold specific parts.
• Some parts or their placement may be optional.
• Pay close attention to the step, as the process order or part
  used may be specific.
• Repeat making certain parts as specified.
• The next instruction step will be the same assembly so far, but
  from a different angle.
• A sub-assembly may be complete and ready to add to the main
  kit.
• Assembly is considered complete, but there could be additional
  optional parts at the end of the instructions.
• Handle with care as some parts are fragile and should not be
  bent.

Product Usage Instructions:

To use the TTSCW-SFU-124 ELMOR with Skylevel Legs High, follow
these steps:

1. Start with the low straight roads included in the kit.
2. Remove the standard legs from the low straight roads.
3. Attach the high legs provided in the kit to replace the
   standard legs on the low straight roads (refer to step 12).
4. If connectors are included in the kit, they can be used instead
   of the standard legs on the low straight roads (refer to step
   18).
5. Follow the assembly instructions provided in the user manual,
   paying attention to the specific process order and parts used.
6. Repeat the necessary steps to make certain parts as specified
   in the instructions.
7. When instructed, carefully score and fold certain parts as
   directed.
8. Continue following the assembly instructions, keeping in mind
   that the next instruction step may be the same assembly so far, but
   from a different angle.
9. Once a sub-assembly is complete, add it to the main kit as
   instructed.
10. Complete the assembly according to the instructions provided,
    checking for any additional optional parts at the end.

Remember to handle the product with care, especially if there
are any fragile parts that should not be bent.

TTSCW-SFU-124 ELMOR:
Skylevel Legs High

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
2
These are a series of icons that may be used throughout the instructions to help your assembly. If in doubt, scroll ahead to confirm.

Do not glue this part

Carefully score and fold this part

This part – or its placement is completely optional

Look closely at this step The process order or part
used, may be specific

Repeat making this part the specified number of times

The next instruction step will be the same assembly so far, but from a different
angle

Sub-assembly complete. This smaller construction
is ready to add to the main kit

Assembly Complete! There could be more optional
parts – check to the very end of instructions

FRAGILE: DO NOT BEND. “Bendy wood” is designed to
curve around a designed frame only.

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
3

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
4

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
5

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
6

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
7

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
8

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
9

10

TTSCW-SFU-124 ELMOR:
Skylevel Legs High

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
11

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
12
High legs replace the standard legs on the low straight roads

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
13

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
14

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
15

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
16

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
17
4

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
18
Connectors replace the standard legs on the low straight roads

TTSCW-SFU-124 ELMOR:
Skylevel Legs High
19