SCHAEFER Zubri Portable Propane Patio Heater Instructions
LIGHTING THE HEATER
STEP 1: TURN ON GAS SUPPLY FROM GAS! PROPANE CYLINDER
STEP 2: POSITION FLAME
Hold flame under burner head (bi) as indicated above.
STEP 3 : START GAS FLOW
Push in control knob and turn anti-clockwise.
GAS WILL IGNITE
IMPORTANT: KEEP CONTROL KNOB PUSHED nr: AT LEAST 15 SECONDS.
This will allow the safety thermo couple devise to heat up. If the thermocouple is not heated correctly the gas supply will automatically cut off.
NB: If flame goes out for any reason wait 2 minutes and repeat step 2 + 3.
TO ADJUST HEAT
- Push in control knob and turn anti-clockwise to increase heat or clockwise to reduce heat.
TURN HEATER OFF + MAKE
SAFE By pushing in control knob and turning clockwise until stop. Flame will go out. TURN OFF gas supply on gas/propane cylinder.
