Patio Heater
OWNER’S MANUAL
PATIO HEATER
MODEL # PH01-SSB/HL2021A
DANGER WARNING: For Outdoor Use Only
WARNING
Step 2 — Attach ground fixtures to Base Step 3 — Attach Post to Cylinder Housing top
4 5 6 7 8 9
Gas hose and regulator
2
1
6PDOO1XWV
2
8
6PDOO%ROW
2/5
7
6
2
1
6
7
1 / 2 / 5 / 6
Step 2 — Attach ground fixtures to Base Option1: Preassembled into base
6OLGH/DUJHEROWVWKURXJKKROHVRI%DVH. 6OLGH/DUJHQXWVWKURXJKKROHVXQGHUEXFNHW
DQGWLJKWHQVFUHZVZLWKSKLOOLSVVFUHZGULYHU )LOOEXFNHWZLWKVDQG
5HT¶G/DUJH6FUHZV 5HT¶G/DUJH1XWV
Option 2:If no water tank, go ahead this step
3 M6xM12
with the decorative ring
Insert the fastening piece through the hole on the tabletop. Hold the tabletop using your hand and screw the fastening piece to the plastic connector counter-clockwise,using the other hand. Tighten the fastening piece.Screw the plastic nut to the plastic connector counter-clockwise.Tighten the plastic nut. Adjust the height of the tabletop.Loosen the plastic nut and adjust the tabletop to the height you want. Tighten the plastic nut.
5
4 (For models without tables,skip to step 4) shown.
6
shown.
7
8
assembly.
Slide two reflector panels together.
leave loose. 9
as above.
