HBH4077 433Mhz RF Wireless Remote Control
Product Information
The 433M remote control is a versatile device that allows users
to wirelessly control various applications. It is equipped with a
PLAY button for signal transmission, a + key for increasing signal
speed, and a – key for decreasing signal speed. The remote control
is widely used in applications such as treadmill control, remote
control toys, smart furniture, and other wireless remote control
scenarios.
Product Usage Instructions
- To send a signal and open the machine, press and hold the PLAY
button. Release the button to stop sending the signal. - To increase the signal speed, press and hold the + key. Release
the key to stop sending the signal. - To decrease the signal speed, press and hold the – key. Release
the key to stop sending the signal.
Warning
- Ensure there is sufficient separation between the remote
control device and the receiver for proper functioning. - Connect the device to an outlet on a different circuit than the
one to which the receiver is connected. - If you need assistance, consult the dealer or an experienced
radio/TV technician. - Any changes or modifications not expressly approved by the
responsible party may void the user’s authority to operate the
equipment.
·
433M remote control instruction manual Pictures of objects:
Parameters: Product Model: HB-N4076 Operating voltage: DC3V (one 2032 button battery) Operating current: less than 20MA when transmitting Operating frequency: 433.92MHZ Modulation mode: OOK Standby current: less than 5A Size: 90*42*14mm Product quality: 24.5g This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Instructions for operation:
1: Press the PLAY button, send signal, open the machine, release to stop sending. 2: Press the+key, send signal,speed+, release to stop sending. 3:Press the-key, send signal,speed-, release to stop sending. Application production scene: 1: The treadmill remote control 2: remote control toys. 3: Smart furniture. , etc. 4:Wireless remote control
Warning:
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver. –Connect the device into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
