RZ066 433M Wireless Remote Control
Product Information: RZ 066 Remote Control
The RZ 066 is a 433M wireless remote control designed for
various applications. It operates using two 7 batteries, providing
strong transmission power and a long remote control distance. With
low power consumption, it ensures extended usage time. The remote
control features 4 buttons and is equipped with a 433M receiving
module.
Key Features:
- 433M wireless technology
- Strong transmission power
- Long remote control distance
- Low power consumption
- 4 buttons for easy operation
Compliance:
This device complies with part 15 of the FCC Rules. It operates
under the following conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Any changes or modifications not expressly
approved by the responsible party could void the user’s authority
to operate the equipment.
Product Usage Instructions:
Basic Functional Operation:
1. Power On and Start Treadmill:
When the treadmill is powered on, press the start key on the
remote control. The treadmill will reverse and start running.
2. Slow Down and Stop Treadmill:
While the treadmill is running, press the stop key on the remote
control to make the treadmill slow down gradually until the running
belt completely stops.
3. Speed Control:
While the treadmill is running, use the speed button on the
remote control to control acceleration. Press this button to
accelerate slowly. Press and hold the button to accelerate
quickly.
4. Speed Reduction:
While the treadmill is running, use the speed reduction key on
the remote control to slow down. Press this key to slow down
gradually. Press and hold the key to slow down quickly.
Follow these instructions to ensure proper usage of the RZ 066
remote control for controlling your treadmill.
RZ 066 Remote control manual
1. functional characteristics RZ 066 is a 433M wireless remote control, powered through
two 7 batteries, with the advantages of strong transmission power, long remote control distance, low power consumption! There are 4 buttons, which with the 433M receiving module! 2. Remote control key correspondence
3. Basic functional operation
3.1 When the treadmill is powered on, short press the start key on the remote control, and the treadmill reverses and starts running
3.2 When the treadmill is running, short press the stop key on the remote control to make the treadmill slow down until the running belt completely stops
3.3 When the treadmill is running, press the speed button on the remote control to accelerate slowly, and press this button to accelerate quickly.
3.4 When the treadmill is running, press the speed reduction key to slow down slowly, and press this key to slow down quickly.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
