Coolaroo 501051 Heavy-duty Shade Fabric Builder’s Block Instruction Manual

HEAVY-DUTY
SHADE FABRIC
BUILDER’S BLOCK
INSTALLATION
INSTRUCTIONS

Congratulations on the purchase of your Coolaroo® Builder’s Block Shade Fabric. Please be sure to read the instructions before installing your fabric.

ADDITIONAL TOOLS NEEDED:

• Zip Ties
• Scissors (optional)
• Ladder (optional)

1. Unroll and unfold entire length of Builder’s Block Shade Fabric. Use scissors to cut to desired length if necessary.
   
2. Secure the edge of the fabric to the top of the fence with a zip tie. Ensure the bottom of the fabric is not dragging on the ground.
3. Pull on fabric to create tension and make sure there is no slack or wrinkles.
   
4. Add zip ties on top and bottom edge about 1 foot apart. Ensure that fabric is straight across the fence throughout the installation.
   

Fabric not recommended for use in strong storms or high winds.

MAINTENANCE:

Your Builder’s Block Shade Fabric has been made of the finest materials and, when properly cared for, will provide years of screening. To clean your fabric, simply rinse with a hose and allow to dry. Do not store fabric wet. Let fabric drycompletely before storing.

CAUTION: Do NOT attempt to install your Shade Fabric during windy conditions.

Questions or Comments? Contact us at:
GALE Pacific USA | www.coolaroousa.com | 1-800-560-4667
© by GALE Pacific Limited. All rights reserved. Coolaroo® s a registered trademark of GALE Pacific Limited. Order
accessories online:
coolaroousa.com
0.00.000.000

References

• Coolaroo
• Coolaroo