Metra C6attf Field Termination Plug User Guide

C6ATTF Field Termination Plug

Product Information: Field Termination Plug

The Field Termination Plug, also known as C6ATTF, is a plug used
for terminating Ethernet cables. It can be used with different
types of cables, such as S/FTP, U/FTP, and F/UTP. The plug supports
solid and stranded wires with a gauge range of 23-26AWG and
22-24AWG. The cable diameter range is between 6.0-7.5mm and
7.0-8.9mm.

The plug comes with pin assignments for T568A and T568B
standards. It has eight pins that are assigned to specific wire
colors, such as white, green, orange, blue, and brown.

Product Usage Instructions:

1. Cut the cable to the desired length and strip off the outer
   jacket to expose the wires.
2. Arrange the wires according to the pin assignment for either
   T568A or T568B standard.
3. Insert the wires into the plug in the correct order and ensure
   they are fully inserted.
4. Use a crimping tool to crimp the plug onto the wires.
5. If using an STP cable, wind the ground wire around the
   plug.
6. Use a cable tie to secure the cable to the plug.
7. Check the connection by using a cable tester.

35mm 35mm Min.
35mm 35mm Min.
35mm 35mm Min.

Field Termination Plug User Guide

C6ATTF

11

22

or

S/FTP

S/FTP

U/FTP.F/UTP

33

44

554

0.2mm Max. 5~8mm Max.

66

7

Cut 2

Cut 1

9a Hand screwing

8
Align

3

Winding ground wire if using STP

10

1110

OK

NG

Cable tie

12
Legend W White G Green O Orange BL Blue BR Brown

1 2 34 56 78 W-G G W-O BL W-BL O W-BR BR
Pin assignment T568A 12 3 456 78 W-O O W-G BL W-BL G W-BR BR
Pin assignment T568B

C6A /C7 C8

Solid 23~26AWG 22~24AWG

Stranded 23~26AWG 22~24AWG

Cable (O.D.) 6.0~7.5mm 7.0~8.9mm