WLN16 Series Weldin One Light LED Flush Mount
Product Information
The installation guide is for four different models:
WLN1611MBKW, WLN1611MBKG, WLN1615MBKW, and WLN1615MBKG. These
models have a wattage of 16W or 30W and operate at 120Vac and 60Hz.
The package includes a fixture body, mounting hardware, and care
instructions. For further assistance, customers can contact Quoizel
Customer Care at 1-800-645-3184 or visit www.quoizel.com.
Product Usage Instructions
- Remove the shade from the fixture body.
- Install the mounting screws to the crossbar. Determine the
mounting holes for the screws and install them, leaving a minimum
length of 5/8 for future installations. - Install the crossbar.
- Install the wall anchors. Drill holes for the wall anchors from
the marks made on the ceiling and install the anchors into the
holes. - Wire the fixture. Connect the white wire from the supply to the
white wire from the fixture, and connect the black (or red) wire
from the supply to the black wire from the fixture. Connect the
ground wire from the supply to the ground wire from the fixture
using the green ground wire. - Hang the fixture body to the mounting screws.
- Install the screws and tighten them, including the mounting
screws. - Install the shade back to the fixture body.
- Restore electricity and save this sheet for future
reference.
INSTALLATION GUIDE FOR WLN1611MBKW,WLN1611MBKG, WLN1615MBKW and WLN1615MBKG
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING · RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the
circuit breaker box or the main fuse box. CAUTION · For your safety, read instructions completely before beginning installation. · If in doubt about electrical installation, consult a licensed electrician. TOOLS REQUIRED
Released Date: 2022-02-16
Ratings
120Vac, 60Hz Model No.
WLN1611MBKW WLN1611MBKG WLN1615MBKW WLN1615MBKG
Wattage 16W 16W 30W 30W
CARE AND MAINTENANCE
· Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am – 5:00pm EST), or visit us on-line at www.quoizel.com.
PACKAGE CONTENTS
A
Fixture Body x 1
MOUNTING HARDWARE
AA
Crossbar x 1
BB
Wire Connector x 3
CC
Outlet Box Screw x 2
DD
Mounting Screw x 2
EE
Wall Anchor x 3
FF
Screw x 3
– 1 of 3 –
INSTALLATION
1
Remove Shade From Fixture Body
2 Install Mounting Screws to Crossbar
Determine mounting holes for mounting screws
Install mounting screws
3 Install Crossbar
4 Install Wall Anchors
Min. 5/8″
* DO NOT screw mounting screws all in the crossbar. Leave a minimum length of 5/8″ for next installations.
Outlet Box
Drilled Hole
Slot Hole Fit slot holes to mounting screws, rotate
the fixture body until it is hung on mounting screws safety.
Mark
1/4″ Drill Bit
Install wall anchors into drilled holes
Drill holes for wall anchors from marks
Mark anchor holes locations on the ceiling
Mark
Remove fixture Body
– 2 of 3 –
INSTALLATION
5 Wiring
6 Hang Fixture Body to Mounting
Screws
White wire from supply Black (or red) wire from supply
White wire from fixture Black wire from fixture
Ground wire from supply
Ground wire from fixture
Green ground wire
7 Install Screws
8 Install Shade Back to Fixture Body
Tighten all screws (include mounting screws).
Your installation is now complete! Restore electricity and save this sheet for future reference.
– 3 of 3 –
Quoizel | Artisans In Lighting
