
Power LED 30 W basic
Organization / Personnel Operators
|
The device possesses a voltage range that can pose an electrical hazard to humans and animals.
It should only be opened and/or disassembled by authorized persons.
Scope of delivery
Lamp incl. illuminant, operating instructions.
Technical data
| Power supply: | 230 Volt / 50 Hz |
| Illuminant output: | 30 Watt / 3.500 Lumen |
| Colour temperature: | 6,500 K |
| Protection class: | IP 64 |
| Length of power cable: | 1,5 m H05RN-F 3G x 1,0 mm² |
| The service life of illuminant: | approx. 30,000 hours |
| Use: | Interior and exterior |
| Weight: | 1,2 kg |
All information is without guarantee! Subject to technical modifications and errors!
Safety instructions
![]() | Keep this appliance out of the hands of children and unauthorized users. Never look directly into the light as this can cause (irreparable) damage to your eyes. |
| If not in use, or in case of repairs or maintenance work, always unplug the power plug. Always grasp the plug rather than the power cable. | |
| Exercise caution during installation: touching live wires can cause a highly dangerous electric shock | |
| Do not touch the appliance during use as the housing becomes hot. | |
| Protect the appliance against dust and external heat. | |
| Protect the appliance against knocks and misuse. Never use brute force when operating the appliance. |
Safety instructions
Keep a mandatory distance of at least 50 cm to the illuminated surface.
Only operate the light on the stand provided; it must not be attached to the ceiling or to a post
Before using the appliance, familiarise yourself with its use.
Modifications to the appliance are not permitted for safety reasons. Damage caused by modifications to the appliance is not covered by warranty.
Use the appliance for the intended purpose only. Improper use of the appliance will void your warranty.
Damage caused by failure to observe the provisions of these operating instructions is not covered by warranty; the retailer is not liable for any defects resulting from the said failure.
Do not use the appliance immediately after it has been subjected to temperature changes. Leave the appliance switched off until it has reached room temperature to protect it against damage.
The appliance is rated protection class I. For this reason, the appliance must be grounded. Connect the appliance to grounded sockets only that have been installed in line with general safety regulations by a qualified electrician.
Make sure that the mains voltage does not exceed the voltage stated in the Technical Data in these operating instructions.
Protect the power cable against crushing and damage. If needed, have the cable replaced by your authorized STORCH service center.
If the protective glass is cracked, replace it without delay. If you have any questions on customer service and/or spare parts orders, please contact STORCH using one of the above-mentioned contact options.
Smoke or odors may occur when you use the appliance for the first time. This is normal and will discontinue after some time.
Work on the electrical equipment of the machine must be performed by a qualified electrician, or by a trained person supervised and guided by an electrician in line with electrical technology rules.
Replacing the LED illuminant
It is not possible to replace the LED illuminant. If a fault occurs, please contact your STORCH sales team member or the STORCH service hotline.
Initial use
Please connect the light to a suitable, earthed plug socket. Then turn on the switch on the back. Do not connect any more than 3.500 W altogether to the available plug sockets.
Warranty
Warranty conditions
A warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial customers. If we have granted an extended warranty period, this period will be noted separately in the operating manual for the equipment in question.
Claims
If you wish to claim under our warranty or guarantee, please return the complete device and your invoice to our logistics center in Berka, postage paid, or send it to one of our authorized service centers. Please contact the chargeable STORCH service hotline first: +49 (0)202. 49 20 – 110.
Your rights under our warranty or guarantee
Claims can only be accepted for material defects or manufacturing errors, and only assume the intended use of the appliance. Wear parts are not covered by such claims. All claims shall become void in the event of installation of third-party components, improper handling, and storage, as well as in the event of obvious disregard of the operating instructions.
Repairs
All repairs have to be conducted on our premises or by an authorized STORCH service center.
Important environmental information about this product
This pictogram on the device or packaging indicates that the device to be disposed of must not be disposed of as domestic waste. Return the device to the retailer or to a public recycling center. Observe local environmental regulations.
In case of doubt, please contact your local waste authority.
Please read the operating instructions carefully before using this appliance. If the appliance was damaged during transport, do not use it, and contact your dealer.
EC Declaration of Conformity
| Name / Address of issuer: | STORCH Malerwerkzeuge & Profigeräte GmbH Platz der Republik 6 D – 42107 Wuppertal |
We herewith declare:
that the following machine complies with the fundamental health and safety requirements of the EC Directives in terms of its design, construction, and the version we have brought into circulation.
This warranty loses its validity in case of unauthorized modification of the tool.
| Designation of the machine: | Power LED 30 W basic |
| Machine Type: | LED Light |
| Item number: | 60 11 25 |
Applied EC directives
| Low Voltage Directive: | 2014 / 35 / EC |
| Electromagnetic Compatibility: | 2014 / 30 / EC |
| RoHS Directive: | 2011 / 65 / EU |
| RoHS Directive: | 2011 / 65 / EU |
Applied harmonised standards
| EN 60598-1:2015 | EN 60598-2-4:1997 |
| EN 60598-2-5:2015 | EN 62493:2015 |
| EN 62471:2008 | EN55015:2013+A1 |
| EN61547:2009 | EN61000-3-2:2014 |
| EN61000-3-3:2013 | EN 62321-1:2013 |
| EN 62321-2:2014 | EN 62321-3-1:2014 |
| EN 62321-4:2014 | EN 62321-5:2014 |
| EN 62321-6:2015 | EN 62321:2009 |
Representative authorised to compile the technical documentation:
STORCH Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6
42107 Wuppertal
Jörg Heinemann
– Managing Director –
Wuppertal, 05-2020
Translation of the original instruction
| Art. no. Description 60 11 25 Power LED 30 W basic |
| Tel.: | +49 (0)2 02 . 49 20 – 112 |
| Fax: | +49 (0)2 02 . 49 20 – 111 |
| Free* service hotline: | 0800 786 72 47 |
| Toll-free* order hotline: | +49 800 7867244 |
| Toll-free* order fax: | +49 800 7867243 |
*only available in Germany
Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6
D-42107 Wuppertal
Telefon: +49 (0)2 02 . 49 20 – 0
Telefax: +49 (0)2 02 . 49 20 – 111
[email protected]
www.storch.de
01-2022
V 02

















