TY336-1911-2 25in LED Lighted Shark
Product Information
SKU #: 1004 384 993
Model #: TY336-1911-2
The 25in LED Lighted Shark is a product designed by Home Accents
to enhance your home décor. The product comes with a spare bulb,
spare fuse, plastic ties, and ground stakes for easy assembly and
maintenance. The lighting string on this product is rated at 4.8
Watts (0.04 Amps) and should not be overloaded or connected to
other electrical products. The product is covered by a 90-day
limited guarantee due to defects in material and workmanship.
Product Usage Instructions
Planning Assembly
Assembly of this product may require more than one person.
Before using the product, inspect it carefully and discard or
return it to the place of purchase with the purchase receipt if
there are any cuts, damages, frayed wire insulation cords, cracks
in the socket enclosures, loose connections, exposed copper wire,
or other obvious damage.
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power
source. Do not unplug by pulling on cord. Ensure that the floor or
surface that the item sits on is flat and level. Be sure to plug
the item correctly into a wall outlet or a UL Listed Power Cord.
Ensure all parts are assembled properly per the Instruction Manual.
If the item does not light, check for loose or broken bulbs and
connections. Do not plug into other electrical items. If the item
has multiple Light String Cords be sure to plug in all cords. Check
for Broken or Burned Out Fuse In Plug.
Care and Cleaning
Carefully remove the product from wherever it is placed, taking
care not to cut any electrical wires. If the product is placed
somewhere other than the ground, it should be well secured and
flat. Wipe the unit with a damp cloth and allow it to dry before
storing. Store the product neatly in a cool, dry location protected
from sunlight.
Assembly
- Assembling the Head & Front Body: Align the two Halves of
Head & Front Body (B) with each other then insert the
connecting rods on one half into the connecting holes on the other
half and fasten together at the connecting loops with Plastic
Tie(I). (Note: Fasten the adjacent parts if needed with plastic
ties (as shown in the FIG ). - Assembling the Rear Body: Align the two Halves of Rear Body (C)
with each other then insert the connecting rods on one half into
the connecting holes on the other half and fasten together at the
connecting loops with Plastic Tie(I). (Note: Fasten the adjacent
parts if needed with plastic ties (as shown in the FIG ). - Attaching the Dorsal Fin: Insert the Dorsal Fin (E) into the
slot on top of the Rear Body (C) and fasten with Plastic
Tie(I). - Attaching the Ventral Fin: Insert the Ventral Fins (F) into the
slots on the bottom of the Rear Body (C) and fasten with Plastic
Tie(I). - Attaching the Tail and Light String: Insert Tail and Light
String (D) into the slot at the end of Rear Body (C) and fasten
with Plastic Tie(I). - Attaching the Hat: Place Hat (A) onto Head & Front Body (B)
and adjust to fit securely. - Attaching the Ground Stakes: Insert Ground Stakes (J) into the
holes at the bottom of the Rear Body (C) and adjust to secure the
product onto the ground.
SKU # 1004 384 993 Model # TY336-1911-2
Thank you!
We appreciate the trust and confidence you have placed in Home Accents through the purchase of this 25in LED Lighted Shark. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543) HOMEACCENTSHOLIDAY.COM
Parts List
Locater
Name
Qty.
A
Hat
1
B
Halves of Head & Front Body
2
C
Halves of Rear Body
2
D
Tail and Light String
1
E
Dorsal Fin
1
F
Ventral Fin
2
Hardware List
Locater
Name
Qty.
G
Spare Bulb
2
H
Spare Fuse
2
I
Plastic Tie
15
J
Ground Stake
4
ASSEMBLY INSTRUCTIONS
25in LED Lighted Shark
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended to assemble parts of the product while laying flat on the ground versus standing the item up to assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service center. 1-855-HDHoliday (1-855-434-6543)
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 4.8 Watts (0.04
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the product connections and wires. If the product is placed somewhere other than the ground it should be well secured and flat. b. Carefully disassemble the unit taking caution not to cut any electrical wires. c. Wipe the unit with a damp cloth and allow the unit to dry before storing. d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord c. Ensure all parts are assembled properly per the Instruction Manual d. If the item does not light check for loose or broken bulbs and connections e. Do not plug into other electrical items f. If the item has multiple Light String Cords be sure to plug in all cords g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This product is covered by a 90 days limited guarantee due to defects in material and workmanship. Return the product with purchase receipts to the location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in accordance with directions provided on or with the product, burn out of bulbs or LEDS, batteries, products that have been subjected to unauthorized repair and/or modification and damage caused by shipping and improper handling, alterations, misuse, in store display models or accidents. Questions, problems, missing parts? Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
A G
E F
D C F
C
B H
B I
J
ASSEMBLY
1 Assembling the Head & Front Body
Align the two Halves of Head & Front Body (B) with each other then insert the connecting rods on one half into the connecting holes on the other half and fasten together at the connecting loops with Plastic Tie(I).(Note: Fasten the adjacent parts if needed with plastic ties (as shown in the FIG ).
B
B
2 Assembling the Rear Body
Align the two Halves of Rear Body (C) with each other then insert the connecting rods on one half into the connecting holes on the other half and fasten together at the connecting loops with Plastic Ties (I).(Note: Fasten the adjacent parts if needed with plastic ties (as shown in the FIG ).
C C
I
I
3 Attach the Head & Front Body to Rear Body
Insert the connecting rods on the front edge Rear Body (C) into the connecting holes on the back edge of the Head & Front Body (B) and fasten together at the connecting loops with Plastic Ties (I).
B
C
I
4 Securing the Tail to the Body
Insert the connecting rod on Tail (D) into the connecting holes on the end of the Rear Body (C) and fasten together at the connecting loops with Plastic Ties (I).
D
C I
5 Assembling the Ventral Fins to the Body
Insert the connecting rods on each Ventral Fin (F) into the connecting holes on the sides of the Front Body (B) and fasten together over the metal frames with Plastic Ties (I).
F B
I
F
6 Assembling the Dorsal Fin to the Body
Insert the connecting rods on the bottom of the Dorsal Fin (E) into the matching connecting holes on the top of Front Body (B) and fasten together over the metal frames with Plastic Ties (I).
E
B
I
7 Assembling the Hat to the top of the Head
Insert the connecting rod on the front bottom edge of the Hat (A) into the matching connecting hole at the top of Head (B).
A
B
8 Assembling the Light String and Ground Stakes
Wrap the Light String around the Body of the Shark for your desired look and secure with Plastic Ties (I) over the metal frame. Insert the clip on the Ground Stakes (J) over the metal base connecting loops then into the ground firmly.
I
J
Home Accents Holiday - Holiday Decorations - The Home Depot
