22RT2062214 42 Inch Warm LED INSEL Donkey
Product Information
SKU # 1007 581 034 Model # 22RT2062214
The 42in 100 Light Warm White LED TINSEL DONKEY is a product
from Home Accents that is designed to enhance your home. The
product comes with a parts list, hardware list, assembly
instructions, use and care guide, and troubleshooting guide. The
product is intended for residential seasonal use for 90 days per
year and is covered by a 90 days limited guarantee due to defects
in material and workmanship.
Parts List
| Locater | Name | Qty. |
|---|---|---|
| A | Ear | 2 |
| B | Head | 1 |
| C | Neck | 1 |
| D | Half of Body | 2 |
| E | Leg | 4 |
| F | Tail | 1 |
| G | Mane | 1 |
Hardware List
| Locater | Name | Qty. |
|---|---|---|
| H | Spare Fuse | 2 |
| I | Spare Bulb | 3 |
| J | Plastic Tie | 20 |
| K | Ground Stake | 4 |
Product Usage Instructions
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power
source. Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 7.2
Watts (0.06 Amps). Do not overload. Do not connect to another
lighting string, decorative outfit or other electrical products.
Before you use or re-use this product inspect it carefully. Discard
or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the
socket enclosures, loose connections, exposed copper wire or other
obvious damage.
Care and Cleaning
- Carefully remove the product from wherever it is placed. This
helps to avoid any undue strain or stress on the product
connections, and wires. If the product is placed somewhere other
than the ground it should be well secured, flat and stable. - Carefully disassemble the unit taking caution not to cut any
electrical wires. - Wipe the unit with a damp cloth and allow the unit to dry
before storing. - Store the product neatly in a cool, dry location protected from
sunlight.
Troubleshooting
- Ensure that the floor or surface that the item sits on is flat
and level. - Be sure to plug the item correctly to a wall outlet or a UL
Listed Power Cord. - Ensure all parts are assembled properly per the Instruction
Manual. - If the item does not light check for loose or broken bulbs and
connections. - Do not plug into other electrical items.
- If the item has multiple Light String Cords be sure to plug in
all cords. - Check for Broken or Burned Out Fuse In Plug.
Assembly
1. Assembling the Body
- Align the two Halves of Body (D) with each other then insert
the connecting rods on one half into the connecting holes on the
other half and fasten at connecting loops with Plastic
Ties(J).
2. Assembling the Legs and Tail to the Body
- Insert the connecting rods on each Leg (E) into the matching
connecting holes on the Body (D) and fasten at the connecting loops
with Plastic Ties (J).The Legs come with metal bars attached to
stabilize the Donkey. Insert the hooked end of the metal bars into
the metal nut on the opposite Leg. - Insert the connecting rods on the Tail (F) into the matching
connecting holes of the back side of the Body (D) then fasten at
the connecting loops with Plastic Tie (J).
SKU # 1007 581 034 Model # 22RT2062214
Thank you!
We appreciate the trust and confidence you have placed in Home Accents through the purchase of this 42in 100 Light Warm White LED TINSEL DONKEY. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543) HOMEACCENTSHOLIDAY.COM
Parts List
Locater
Name
Qty.
A
Ear
2
B
Head
1
C
Neck
1
D
Half of Body
2
E
Leg
4
F
Tail
1
G
Mane
1
Hardware List
Locater
Name
Qty.
H
Spare Fuse
2
I
Spare Bulb
3
J
Plastic Tie
20
K
Ground Stake
4
ASSEMBLY INSTRUCTIONS
42in 100 Light Warm White LED TINSEL DONKEY
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts are connected by the lighting string that runs throughout the item. Take special care not to pull, cut or damage the lighting string. Read the entire manual prior to assembly and identify all the parts included in the package against the parts list. It is recommended to assemble parts of the product while laying flat on the ground or table versus standing the item up to assemble the parts. If any parts are missing or damaged do not attempt assembly but contact our customer service center or return to place of purchase with purchase receipt. Assembly of this product may require more than one person. 1-855-HDHoliday (1-855-434-6543
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 7.2 Watts (0.06
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or other electrical products. Before you use or re-use this product inspect it carefully. Discard or return to place of purchase with purchase receipt if the product has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures, loose connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue strain or stress on the product connections, and wires. If the product is placed somewhere other than the ground it should be well secured, flat and stable. b. Carefully disassemble the unit taking caution not to cut any electrical wires. c. Wipe the unit with a damp cloth and allow the unit to dry before storing. d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord c. Ensure all parts are assembled properly per the Instruction Manual d. If the item does not light check for loose or broken bulbs and connections e. Do not plug into other electrical items f. If the item has multiple Light String Cords be sure to plug in all cords g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This product is covered by a 90 days limited guarantee due to defects in material and workmanship. Return the product with purchase receipts to the location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in accordance with directions provided on or with the product, burn out of bulbs or LEDS, batteries, products that have been subjected to unauthorized repair and/or modification and damage caused by shipping and improper handling, alterations, misuse, in store display models or accidents. Questions, problems, missing parts? Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
A
G
H
B
C
D
I
F
J
K
E
ASSEMBLY
1 Assembling the Body
Align the two Halves of Body (D) with each other then insert the connecting rods on one half into the connecting holes on the other half and fasten at connecting loops with Plastic Ties(J).
D
2 Assembling the Legs and Tail to the Body
Insert the connecting rods on each Leg (E) into the matching connecting holes on the Body (D) and fasten at the connecting loops with Plastic Ties (J).The Legs come with metal bars attached to stabilize the Donkey. Insert the hooked end of the metal bars into the metal nut on the opposite Leg. Insert the connecting rods on the Tail (F) into the matching connecting holes of the back side of the Body (D) then fasten at the connecting loops with Plastic Tie (J).
J
D
F
J E
3 Assembling the Head and Neck
Insert the connecting rods on the bottom of the Neck (C) into the matching connecting holes on the Body (D). Insert the connecting rods on the bottom of Head (B) into the matching connecting holes at the top of the Neck (C) and fasten at the connecting loops with Plastic Ties (J).
B J
C
D
4 Assembling the Mane and Ears
Insert the connecting rods on the Mane (G) into the matching connecting holes on the Head (B) and Neck (C). Insert the connecting rods on each Ear (A) into the matching connecting holes on the Head (B).
A
G
B C
5 Assembling the Ground Stakes
Insert Ground Stakes (K) over the metal frame of each hoof then into the ground firmly.
K











