22PA72321 LED Lit Gold Encrusted Casket
Product Information
This is the instruction manual for the 6ft LED Gold Encrusted
Casket. It is designed for decorative purposes and is suitable for
both indoor and outdoor use. Please note that this item is not
intended for use by children under the age of 14.
The device complies with part 15 of the FCC rules and must not
cause harmful interference. It must also accept any interference
received. The responsible party for FCC compliance is Pan Asian
Creations Limited.
For any questions, problems, or missing parts, please contact
our Home Accents Holiday customer care department at
1-855-HDHoliday (1-855-434-6543), Monday-Friday, 8am-7pm EST, and
Saturday, 9am-6pm EST. You can also email the manufacturer at
[email protected].
Safety Instructions
- All cautions in these operating instructions should be followed
completely. - Do not use the product near water, such as a bathtub, laundry
tub, kitchen sink, wet basement, or swimming pool. - Avoid displaying the product near any heat source, such as
radiators, stoves, fireplaces, etc. - The display should be serviced by a qualified service person
only. Do not attempt to service the unit beyond what is described
in the operating instructions. - Take extra care when displaying any figure that may contain
small parts around small children. - The use of this decoration should always be supervised by an
adult. - Remove the AC/DC adapter when not in use.
Important Safety Instructions
- Read and follow all safety instructions.
- Read and follow all instructions provided with the
product. - Do not use an extension cord.
- Refer to the National Electrical Code (ANSI/NFPA 70) for wiring
installation and clearance guidelines. - Installation work and electrical wiring must be done by
qualified individuals in accordance with applicable codes and
standards, including fire-rated construction. - Do not install or use the product within 10 feet of a
pool. - Do not use in a bathroom.
- When used outdoors, the product should be installed only to a
covered Class A GFCI protected receptacle that is weatherproof. If
one is not provided, contact a qualified electrician for proper
installation. Ensure that the power unit and cord do not interfere
with completely closing the receptacle cover.
Product Usage Instructions
The 6ft LED Gold Encrusted Casket can be displayed lying down or
standing up, based on your preference.
Please follow these steps for product usage:
- Choose the desired display position for the casket.
- Ensure that the casket is placed away from open fires or heat
sources such as radiators or stoves. - Keep off the casket and do not use it as a toy. It is intended
for decorative purposes only.
INSTRUCTION MANUAL
1007 455 058
SET-UP INSTRUCTIONS FOR THE 6FT LED GOLD ENCRUSTED CASKET
DISPLAY LYING DOWN OR STANDING UP
1-855-HDHoliday (1-855-434-6543), Monday-Friday, 8am-7pm EST, and Saturday, 9am-6pm, EST
Questions, problems, missing parts? Before returning the product to your local Home Depot store, please call our Home Accents Holiday customer care department at 1-855-HDHoliday (1-855-434-6543), Monday-Friday, 8am-7pm EST, and Saturday, 9am-6pm, EST or email the manufacturer at [email protected].
WARNING: This is not a toy and is for decorative purposes only. For indoor/outdoor use. This item is not intended for use by children under the age of 14. Do not place product near an open fire or heat source such as a radiator, stove, etc.
KEEP OFF, DO NOT LIE IN THE CASKET OR SIT OR CLIMB THE
CASKET. THIS IS NOT A TOY. THIS ITEM IS FOR DECORATION ONLY.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna · Increase the separation between the equipment and receiver · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected · Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible party for FCC: Pan Asian Creations Limited. Address: PO Box 165, New Hartford, NY 13413 For FCC email: [email protected]
SAFETY INSTRUCTIONS: 1. All cautions in these operating instructions should be followed completely. 2. Do not use near water; such as a bathtub, laundry tub, kitchen sink, wet basement or swimming pool, etc. 3. Do not display the product near any heat source such as radiators, stoves, fireplaces, etc. 4. Display should be serviced by a qualified service person only. Do not attempt to service this unit beyond
what is described in the operating instructions. 5. Take extra care when displaying any figure that may contain small parts around small children. 6. Use of this decoration should always be supervised by an adult. 7. Remove AC/DC adapter when not in use.
IMPORTANT SAFETY INSTRUCTIONS: When using electrical products, basic precautions should always be practiced including the following: 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 2. Read and follow all instructions that are on the product or provided with the product. 3. Do not use an extension cord. 4. Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and
clearance from power and lighting conductors. 5. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction. 6. Do not install or use within 10 feet of a pool. 7. Do not use in a bathroom. 8. WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected
receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with completely closing the receptacle cover.
1
SAFETY INSTRUCTIONS: 1. All cautions in these operating instructions should be followed completely. 2. Do not use near water; such as a bathtub, laundry tub, kitchen sink, wet basement or swimming pool, etc. 3. Do not display the product near any heat source such as radiators, stoves, fireplaces, etc. 4. Display should be serviced by a qualified service person only. Do not attempt to service this unit beyond
what is described in the operating instructions. 5. Take extra care when displaying any figure that may contain small parts around small children. 6. Use of this decoration should always be supervised by an adult. 7. Remove AC/DC adapter when not in use.
IMPORTANT SAFETY INSTRUCTIONS: When using electrical products, basic precautions should always be practiced including the following: 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 2. Read and follow all instructions that are on the product or provided with the product. 3. Do not use an extension cord. 4. Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of wiring and
clearance from power and lighting conductors. 5. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction. 6. Do not install or use within 10 feet of a pool. 7. Do not use in a bathroom. 8. WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected
receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with completely closing the receptacle cover. 9. WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician. 10. WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface. 11. Not for use with receptacles that are weatherproof only when the receptacle is covered (attachment plug cap not inserted and receptacle cover closed. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for power units.
IMPORTANT: This product can be powered by a UL listed 4.5 V,0.2 A adapter (included). Adapter should be plugged into a 100 V-240 V household outlet.
TO ACTIVATE: The ON/OFF/TIMER toggle switch is located on the cable of Part (K). Press the “ON” position switch to activate LED lights. Press the “OFF” position switch and unplug the adapter when not in use. Press the “TIMER” position switch to activate LED lights and the timer feature, which will automatically turn lights on for 6 hours and will shut off for 18 hours.
TROUBLESHOOTING: Problem
Solution
1. Check all wire connections and make sure all parts are securely attached.
The product does not work
2. Check and make sure the ON/OFF/TIMER switch is in the “ON” position.
3. Check to make sure the adapter is connected to a working power source. Make sure the adapter is plugged into a standard 100V-240V household outlet.
If you are still experiencing problems with the product, please call 1-855-HDHOLIDAY (1-855-434-6543) or email [email protected] for further assistance.
DISTRIBUTED BY: HOME DEPOT 2455 PACES FERRY ROAD ATLANTA, GA 30339
03302022_2009015 Printed in China
2
PARTS LIST:
A. Upper Section
B. Middle Base Panel
C. Middle Side Panel
D. Lower Section
B (A)
B (D)
X 1
E. Bottom Lid Panel
X 1
F. Top Lid Panel
X 2
G. Pillow
X 1
H. Front Metal
Support Base
I. Back Metal
Support Base
X 1
X 1
J. Upper Metal Support
K. Cable with
ON/OFF/TIMER toggle switch
X 1
X 1
L. AC/DC Adapter
M. Locking Plug
N. Tools
X 1
X 1
O. Skeleton Holder
X 1
P. Ground Stakes
X 1
X 2
X 1
X 1
X 4
3
ASSEMBLY:
NOTE: For outdoor yard display it is recommended that you start the assembly process by first determining the intended display location, making sure that the surface is flat and/or level for the placement of the base, and then securing the base firmly into the ground with the included ground stakes.
“CLICK”
LOCKING PIN
Step 2
MEANS IT’S LOCKED
Step 1
B (A) B (D)
C
C
B (A)
B (D)
B
B
Turn the (4) x “Locking keys” located under part B to secure the C parts together.
B (A)
B (D)
Use the Tools (Part N) to turn the (2) x “locking keys” located inside Part A to lock and secure in place.
Step 3
A
Step 3B
A
C
Step 3A
C
B (A)
B (D)
C
B
NOTE: B (A) CONNECTS TO PART A, AND B (D)
4
CONNECTS TO PART D. DO NOT REVERSE.
Step 4
C
D
Step 4A
A C
C
B (A)
B
B (D)
Use the Tools (N) to turn the (2) x “locking keys” located inside Part D to lock and secure in place.
Step 4B
D
Step 5
Close the (6) x “Locking Clips” located under the casket parts (A & D) onto the corresponding (6) x “Locking Clip Attachments” to fasten and secure the casket parts together.
A B D
5
Step 6
A
B
D
K
Connect the end of cable (K) into the end of the cable of the casket (A).
Attach the cable into the (5) x “cable holders” located under Parts A, B and D.
Step 7 G
A
G
A
Attach the pillow (G) into the casket (A) by aligning the two holes and then push in and slide down to lock and secure the pillow in place.
TIMER ON
OFF
6
Step 8
E
D E
D
F F Step 9
A
TIMER ON
OFF
F A
TIMER ON
OFF
7
F Step 10
A
M
N
Insert the (2) x “Locking Plugs” (M) into the holes of (A) and use the Tools (N) to lock and secure in place.
A
Attach the open end of the hydraulic rod connected to (F) into the ball-shaped protrusion located on (A).
Step 11 F
F
Use a screwdriver (not included) to
remove the two screws of the
hydraulic rod connected to (F) when
disassembling and/or storing the
casket.
8
TIMER ON
OFF OFF
TIMER ON
Step 12
TIMER
OFF
Once the power supply has been plugged in, locate the
ON/OFF/TIMER toggle switch on the cable of part (K) and
ON
press the “ON” position switch to activate LED lights.
Step 13
AC Adapter (DC 4.5V, 0.2A)
Connect the UL-Listed, 4.5V 0.2A AC/DC Adapter (L) into the connection at the end of the ON/OFF/TIMER toggle switch cable of Part (K), and plug it into a standard 100V-240V household power outlet.
Fully Assembled Product
9
STAND DISPLAY OPTION
LOCKING PIN “CLICK”
MEANS IT’S LOCKED
I
Step 1
H
J
Step 2
P H
Insert 4 x ground stakes (P) through the corresponding holes located in the Metal base (H) and push or gently hammer (not included) to secure into the ground for outdoor display stability as shown.
P H
10
Upright Casket Display
B J
Step 3
J
Pull the lower position clip located on the bottom of (B) down over the metal support (J) to secure the casket to the stand in the upright position.
Leaning Casket Display
Step 4 A
J
Pull the upper position clip located on the bottom of (A) down over the metal support (J) to secure the casket to the stand in the leaning position.
Fully Assembled Product
Fully Assembled Product 11
SKELETON DISPLAY OPTION (SKELETON NOT INCLUDED)
Step 1
A
A
Squeeze the two ends of the panel cover located on the back of (A), and then gently push it out partially as you squeeze.
Step 2
A A
O
Insert the skeleton holder into the hole inside (A), where the panel cover was removed.
A
Carefully remove the partially pushed out panel cover from the inside of (A).
12
Step 3
* The 5-Foot Pose-and-Stay Skeleton (SKU Number 1001 265 784) is not included with purchase. The Pose-and-Stay Skeleton can be purchased “in store” or ordered from The Home Depot Web Site at WWW.HOMEDEPOT.COM
Attach the lower spine of the skeleton into the skeleton holder to secure in place.
Fully Assembled Product 13
The Home Depot
