GAM71003AG Gamma One Light Pendant
Product Information:
- Model: #GAM71003AG
- Manufacturer: Crystorama
- Website: www.crystorama.com
- Fixture Type: Hanging Light
- Recommended Bulb Type: Medium Base Bulb
- Recommended Bulb Wattage: 40 Watts
- Maximum Bulb Wattage: 60 Watts
- LED Bulbs: Suitable for extended use
- Rating: Dry Rated
- Material: Not specified
- Dimensions: Shade assembly – H10; XSN71003AGSHA18IN
- Weight: Not specified
Product Usage Instructions:
- Before installation, place the fixture parts on a soft
cloth-covered platform. - Determine the preferred hanging height and select the
appropriate length of rods needed. - Feed the wire through the rods and screw them together. Attach
one end of the rod assembly to the swivel on the canopy. - Install the mounting plate onto the outlet box.
- Lift the fixture up to the ceiling and make the wire
connections. Secure the canopy with screws. - Screw the shade assembly onto the other end of the rod
assembly.
Warning:
This product can expose you to Lead, which is known to the State
of California to cause cancer and/or birth defects or reproductive
harm. For more information, visit www.p65warnings.ca.gov.
Parts Included:
- (2) Wire Connector (Part Number not specified)
- (1) Mounting plate (Part Number not specified)
- (2) Mounting Screw (Part Number not specified)
- (2) Screw (Part Number not specified)
- (1) Swivel (Part Number: XSN71003AGCAN5IN)
- (1) Canopy; W5xH1; with 2 side holes; (Part Number:
XSN71003AGCAN5IN) - (1) H6 ROD; (Part Number: XSN71003AGROD6IN)
- (3) H12 ROD; (Part Number: XSN71003AGROD12IN)
- (1) Shade assembly; H10; (Part Number: XSN71003AGSHA18IN)
Note: Bulb not included.
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #GAM71003AG
Crystorama.com
WARNING:
12″ROD
Electrical Danger Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
12″ROD 12″ROD 6″ROD
You will need 1- Medium Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
1. Decide the preferred hanging height and choose the correct length of rods needed.
2. Feed the wire through the rods and screw them together. Screw one end of the rod assembly onto the swivel on the canopy.
3. Install the mounting plate onto the outlet box.
4. Raise the fixture up to the ceiling and do the wire connections. Secure the canopy with the screws.
5. Screw the shade assembly onto the other end of the rod assembly
59″ 13 1/4″
18″
10″
WARNING:This product can expose you to Lead,
which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #GAM71003AG
Outlet Box
Wall Plug (not include.)
Part Number
Part Numbers
A. (2)-Wire Connector B. (1)-Mounting plate C. (2)-Mounting Screw D. (2)-Screw E. (1)-Swivel F. (1)-Canopy; W5″xH1 ” ; with 2 side
holes; XSN71003AGCAN5IN G. (1)-H6″ ROD; XSN71003AGROD6IN H. (3)-H12″ ROD; XSN71003AGROD12IN I. (1)-Shade assembly ; H10″;
XSN71003AGSHA18IN
Crystorama.com
(Bulb not included)
Crystorama Lighting
p65warnings.ca.gov
