RL 3593 Tisdale Large Table Lamp
Product Information
Product Name: Tisdale Large Table Lamp
Item Number: RL 3593
Bulb: Bulb not included
Usage: Indoor use only
Care Instructions: Clean only with a soft dry cloth or feather
duster. Do not use abrasive or chemical agents.
Safety Notice: This light fixture should be installed in accordance
with all applicable, local installation codes, and by a person
familiar with the construction and operation of it, as well as the
hazards involved. Inspect item and contents carefully. If any
damage or defect is found, do not install. Retain all packaging
material until installation is complete and approved.
Product Usage Instructions
- Carefully remove all parts from the box. Place on a clean, soft
surface. - Install harp (C) to saddle (E), adjust harp (C) to desired
height, then tighten adjustment knobs (D). - Remove finial (A) from harp (C).
- Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut
off from interior of shade to avoid damages. - Install light bulb into the socket.
- Remove protective cover (F) from plug.
- Plug into electrical outlet and test the fixture.
ASSEMBLY INSTRUCTIONS
A
B C Bulb not included D E
F
Tisdale Large Table Lamp
Item # RL 3593
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) to saddle (E), adjust harp (C) to desired height, then
tighten adjustment knobs (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 7. Remove protective cover (F) from plug. 8. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
LED
