Shnen KS 2100iG S Running Generator
User Manual
KS 2100iG S Running Generator
COMMISSIONING OF A INVERTER GENERATORS
RUNNING GENERATOR IN GASOLINE MODE FOR MODELS KS 2100iG S, KS 3100iG S
- Please read the operating manual carefully before getting started.
- Fill the engine with motor oil for gasoline engines SAE 10W-30 or SAE 10W-40.
- Check oil level.
- Check fuel level.
- Close the gas valve on the cylinder.
- Open the vent on the fuel cap to the “ON”.

- Turn the Multifunctional engineswitch to the “START” position (fig. 1).
- Pull the manual starter until a slight resistance is felt, then pull it toward you relatively sharply. Slowly turn the manual starter by hand, do not release it abruptly.
- Turn the Multifunctional ngineswitch to the “RUN” position.
- If the generator does not start after several attempts, please contact our customer support on the website: ks-power.de/en.



















