AGT-SVH60 Vibratory Roller

AGT-SVH60 Vibratory Roller

Product Introduction

This walk-behind roller is powered by Honda GX160/GX270/GX390
engine type or CF178F diesel-powered engine, with high performance
and quality assurance. It uses centrifugal clutch CVT and hydraulic
two-way travel, with chain walking and torque for more stability.
Exciting force is controlled by the throttle directly, making it
easy to operate, mobile, and flexible.

This machine features a small size, compact structure, and
foldable operating handle to provide the operator with a
comfortable operating environment. It is easy to transport and
collect after being folded. It can also be supported to use with
large road rollers. It is widely used in large auxiliary road
roller (subgrade, base surface, asphalt surface), sidewalk, covers
in periphery, curbs, small-scale pavement engineering, road
pavement landfill compactor after patching potholes, highway
repair, backfill compaction, a small parking lot, stadium
compaction. Roads, municipal roads department, ideal for the
square.

Technical Data

Precautions

This equipment cannot be installed, operated, or repaired
without reading instructions. Electricity must be hooked up by a
certified electrician. Do not use this equipment beyond its rated
capacity. If there are missing parts or questions on assembly,
please contact us.

Control Device

1. Fuel Valve: For controlling the passage between the fuel tank
   and the carburetor. When the engine is running, the fuel valve must
   be pulled to the “on” position. When the engine is not used, pull
   the fuel valve to the “off” position to prevent oil outflow in the
   carburetor, reducing the possibility of gasoline leakage.
2. Engine Switch: Controls the ignition system. Engine switch to
   “on” position to start the engine. Engine switch to “off” position
   to shut down the engine.
3. Choke Lever: Controls the carburetor choke. When the choke
   lever is located in the “off” position, it can improve
   concentration of gasoline to make the engine cold start. After the
   engine is started, choke lever located at “on” position, to provide
   suitable fuel during its working, also provides right fuel for
   starting engine heat engine.
4. Throttle Lever: Controls engine speed. Let throttle lever in
   the desired engine speed position.

Run

1. Before the Test Run:
   1. Check engine and hydraulic tank and appearance of tubing and
      bottom to see if the oil is spilling.
   2. Wipe off excess dirt and other obstacles, especially around
      muffler and recoil starter.
   3. Check appearance, if strong in all nuts, bolts, and screws, if
      too loose in drive belt and chain.
   4. Check oil in engine and hydraulic oil tank, running in low fuel
      result in engine damage, unsteady gait, periodic replacement of
      engine oil and hydraulic oil. To avoid damage in an accident, check
      oil level before starting.

Thank you for using our machines. We will continue to support
your work all the time. Thanks again.

PRODUCT MANUAL
AGT-SVH60 Vibratory Roller

AGT

WARNING

This equipment can not be installed, operated or repaired without reading instructions.
Electricity must be hooked up by certified electrician. Do not use this equipment beyond its rated capacity. Missing parts or questions on assembly?
Please contact us.

1/7

Do appreciate you using our machines. We will continue to support your work all the time. Thanks again.
1 Product Introduction
This walk-behind roller using GX160 / GX270 / GX390 Honda engine type, CF178F diesel-powered, high performance, quality assurance,Using centrifugal clutch CVT.
T Hydraulic two-way travel, Using chain walking, torque, more stable. Exciting force is G controlled by the throttle directly, easy operation, mobile and flexible.
This machine features: small size, compact structure, foldable operating handle to the
A operator with a comfortable operating environment, easy transport and collection after
folded. It also can be supported to use with large road rollers. Widely used in large auxiliary road roller (subgrade, base surface, asphalt surface) sidewalk, covers in periphery, curbs, small-scale pavement engineering, road pavement landfill compactor after patching potholes, highway repair, backfill compaction, a small parking lot, stadium compaction. Roads, municipal roads department, ideal for the square.
2/7

2 Technical Data

model

SVH60

weight (KG)

640

Packing sizemm

1600*850*1900

powerhp

9.6KW

Fuel capacityL

2.7

Fuel type

gasoline

Vibration frequency

70(HZ)

Climbing ability

30%

speed(KM/h)

3.8

Linear static pressure

45(N/CM)

type Steel wheel size(mm)

walk-behind dual-drum roller
AGT 380(D)×650(W)mm*2

3 Precautions
1, before starting each launch, do check before operation, to avoid personal injury and equipment damage 2,To prevent fires, Do ensure good ventilation, during operating, the engine is at least 1 meter distance from buildings and other equipment. Do not put combustibles at side of engine . 3, children and pets must stay away from operating area, to prevent burns by gasoline engine parts or to hurt by working equipment 4. Learn how to shut down operating device and control of all components quickly, never allow untrained personnel to operate the equipment. 5. Do not put combustible materials ,such as gasoline, lighters and other equipment to side in working machine the equipment. Adding fuel in a well ventilated place, refueling the engine after stop running, because gasoline is highly flammable, it would be expolded under some conditions 6. Do not overfill fuel tank, it should be no fuel at the neck of oil filler. If fuel overflows, it must be removed and evaporated etc. before starting the engine. 7, Prohibited smoking or open flames, in the place of adding fuel and fuel storage 8, Engine exhaust, it contains carbon monoxide, avoid inhalation, and never operating machine under closed, unventilated areas or poor ventilation 9 ,During engine is running, muffler will be very hot , this heat to maintain period of time after stop working. Do not touch it to avoid burns or fire. After engine cool down, move it to storage room.

3/7

4 control device
1) fuel valve
Fuel valve for controlling the passage between the fuel tank and the carburetor, when the engine is running, the fuel valve must be pulled to on position. When the engine is not used, pull the fuel valve to off position. Prevent oil outflow in the carburetor, reducing the possibility of leakage of gasoline.
2) engine switch
Engine switch controls ignition system, engine switch to ON position, start engine, engine switch to OFF position, shut down engine.
3) choke lever
Choke choke control lever carburetor. When choke lever is located OFF position, it can improve concentration of gasoline to make engine cold start. After engine is started, choke lever located at ON position, to provide suitable fuel during its working, also provides right fuel for starting engine heat engine.
4) throttle lever
Throttle lever controls engine speed, let throttle lever in the desired engine speed position.
5 run
(A) before the test run
1) Check engine and hydraulic tank and apperance of tubing and bottom, to see if the oil is
T spilling. G 2)Wipe off excess dirt and other obstacles, especially around muffler and recoil starter A 3)Check appearance, if strong in all nuts, bolts and screws, if too loose in drive belt and
chain
4)check oil in engine and hydraulic oil tank , running in low fuel, result in engine
damage, unsteady gait, periodic replacement of engine oil and hydraulic oil. to avoid damage in an accident ,check oil level before starting.
5) Check air filter, dirty air filter will reduce amount of air into carburetor, reducing engine
power.
6) Check if they are normal in V-belts, chains.
(B) road roller start operation
1) Put engine fuel valve plate to ON position , put hydraulic reversing handle into Forward
or Reverse position. During heating engine, need to pull choke lever to ON position.
2) Turn engine switch to ON position. 3) Gently pull recoil handle till felling felt resistance, then quickly pulled, slowly back into
handle.
4). After starting engine, if choke lever in OFF position, slowly move it to ON position, let
engine warm, start to work after idling five minutes
5)After warm-up engine is running, Push the front valve, road roller forward; After shift
valve , road roller backward walking.
6)Pull back throttle lever, road roller starts working
(C) pressure to shut down the road
1) If Emergency, simply pull handle to stop position. 2) Under normal circumstances, pull handle to stop position, push throttle lever forward,
engine idling running , then push engine switch to OFF position.
4/7

AGT
Note: maintenance issues emissions associated with project * Replace paper part only
(1) In dusty places, plus ground maintenance. (2) unless user has proper tools and maintenance capability. (3) engine for commercial purposes, record running time, to determine maintenance time.
5/7

7 Common Problem

Engine can not be started

Possible Causes

Approach

Fuel valve not open

Pull valve to open (ON)

1 Check control
position

Open choke

Close choke

engine switch not open engine switch to open(ON)

2 Check fuel

No petrol
GT Gasoline A metamorphism
or added gone gasoline

Gas up
Drain fuel tank, carburetor fuel, adding new gasoline

spark plug is damaged, Clean, adjust gap or replace

dirty and incorrect gap
3 Remove spark

spark plugs

plug inspection

Fuel wet spark plug

Dried Refit spark plug, pull valve lever to fastest position

Lack of engine power 1 Check air filter
2 Check fuel

Possible Causes

Approach

Filter blocked
Gasoline metamorphism
or added gone gasoline

Clean or replace filter
Drain fuel tank, carburetor fuel,
adding new gasoline

6/7

8 Hydraulic System
AGT
7/7