Msi Modern Md272xp (3pb1) Lcd Monitor User Guide

Modern MD272XP (3PB1) LCD Monitor

Product Information

The Modern Series LCD Monitor is available in two models: Modern
MD272XP (3PB1) and Modern MD272XPW (3PB1). This user guide provides
detailed information on the monitor’s OSD setup and OSD keys.

The monitor package includes the following items:

• Monitor: Modern MD272XP or Modern MD272XPW
• Documentation: Quick Start Guide
• Stand with Screw(s)
• Stand Base with Screw(s)
• Accessories: Screw(s) for Wall Mount Bracket(s), Power Cord,
  External Power Supply (Optional)
• Cables: High Speed HDMITM Cable (Optional), USB Upstream Cable
  (Optional) (for USB Type-B Upstream Port)

Important notes:

• Contact your place of purchase or local distributor if any of
  the items is damaged or missing.
• Package contents may vary by country.
• The included power cord is exclusively for this monitor and
  should not be used with other products.

Product Usage Instructions

Installing the Monitor Stand

1. Leave the monitor in its protective foam packaging. Align the
   stand to the monitor groove.
2. Push the stand towards the monitor groove until it locks in
   place.
3. Connect the base to the stand and tighten the base screws to
   secure the base.
4. Make sure the stand assembly is properly installed before
   setting the monitor upright.

Important:

• Place the monitor on a soft, protected surface to avoid
  scratching the display panel.
• Do not use any sharp objects on the panel.
• The groove for installing the stand bracket can also be used
  for wall mount. Please contact your dealer for proper wall mount
  kit.
• This product comes with NO protective film to be removed by the
  user! Any mechanical damages to the product including removal of
  the polarizing film may affect the warranty!

Adjusting the Monitor

This monitor is designed to maximize your viewing comfort with
its adjustment capabilities.

Important:

• Avoid touching the display panel when adjusting the
  monitor.
• Please slightly tilt the monitor backwards before pivoting
  it.

Monitor Overview

The monitor overview includes the following components:

1. OSD Keys
2. Power Button / Power LED: Lit in white after the monitor is
   turned on. If no signal input, the LED will turn into orange. Lit
   in orange when the monitor is in Stand-by mode.
3. Kensington Lock
4. Power Jack
5. USB Type-C Port: This port supports DisplayPort Alternate (DP
   Alt) Mode and up to 20V/3.25A (65W) power delivery. Your USB-C
   signal source and cable must support DisplayPort Alternate Mode to
   enable video output to the monitor.
6. DisplayPort: Supports 1920×1080@100Hz as specified in
   DisplayPort 1.2a.
7. HDMITM Connector: Supports 1920×1080@100Hz as specified in
   HDMITM 1.4b.
8. Headphone Jack
9. USB 2.0 Type-B Upstream Port: For USB Upstream Cable.

Modern Series
LCD Monitor
Modern MD272XP (3PB1) Modern MD272XPW (3PB1)
User Guide

Contents
Getting Started……………………………………………………………………………………………….. 3 Package Contents……………………………………………………………………………………… 3 Installing the Monitor Stand……………………………………………………………………….. 4 Adjusting the Monitor ………………………………………………………………………………… 6 Monitor Overview………………………………………………………………………………………. 7 Connecting the Monitor to PC …………………………………………………………………….. 9
OSD Setup ……………………………………………………………………………………………………. 10 OSD Keys ……………………………………………………………………………………………….. 10
OSD Menus…………………………………………………………………………………………………… 11 Professional……………………………………………………………………………………………. 11 Image …………………………………………………………………………………………………….. 14 Input Source …………………………………………………………………………………………… 15 Navi Key …………………………………………………………………………………………………. 15 Setting……………………………………………………………………………………………………. 16
Specifications……………………………………………………………………………………………….. 18 Preset Display Modes …………………………………………………………………………………… 20 Troubleshooting……………………………………………………………………………………………. 21 Safety Instructions………………………………………………………………………………………… 22 TÜV Rheinland Certification…………………………………………………………………………… 24 ENERGY STAR Certification…………………………………………………………………………… 24 Regulatory Notices……………………………………………………………………………………….. 25
Revision V1.0, 2023/06
2 Contents

Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.

Package Contents

Monitor

Modern MD272XP Modern MD272XPW

Documentation

Quick Start Guide

Stand with Screw(s)

Stand Base with Screw(s)

Accessories

Screw(s) for Wall Mount Bracket(s)

Power Cord

External Power Supply (Optional)

Cables

High Speed HDMITM Cable (Optional) USB Upstream Cable (Optional) (for USB Type-B Upstream Port)

Important
Contact your place of purchase or local distributor if any of the items is damaged or missing.
Package contents may vary by country.
The included power cord is exclusively for this monitor and should not be used with other products.

Getting Started 3

Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand to the monitor groove.
2. Push the stand towards the monitor groove until it locks in place.
3. Connect the base to the stand and tighten the base screws to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor upright.

1

2

3

4 Getting Started

Important
Place the monitor on a soft, protected surface to avoid scratching the display panel. Do not use any sharp objects on the panel. The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit. This product comes with NO protective film to be removed by the user! Any
mechanical damages to the product including removal of the polarizing film may affect the warranty!
Getting Started 5

Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment capabilities.
Important
Avoid touching the display panel when adjusting the monitor. Please slightly tilt the monitor backwards before pivoting it.
-5° 20°
110 mm

30°

30°

90°

90°

6 Getting Started

Monitor Overview
2 1

3

45

6

7

8 9 10

Getting Started 7

1 OSD Keys
2 Power Button / Power LED
Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode.
3 Kensington Lock

4 Power Jack

5 USB Type-C Port
This port supports DisplayPort Alternate (DP Alt) Mode and up to 20V/3.25A (65W) power delivery.
Important
Your USB-C signal source and cable must support DisplayPort Alternate Mode to enable video output to the monitor.

USB Type-C Power Delivery
5V / 3A (15W) 9V / 3A (27W) 12V / 3A (36W) 15V / 3A (45W) 20V / 3.25A (65W)

6 DisplayPort
Supports 1920×1080@100Hz as specified in DisplayPort 1.2a.

7 HDMITM Connector
Supports 1920×1080@100Hz as specified in HDMITM 1.4b.

8 Headphone Jack

9 USB 2.0 Type-B Upstream Port
For USB Upstream Cable.
Important

To Monitor

Check the package for USB Upstream Cable and connect it to the PC and monitor. Once this cable is connected, the USB Type-A Downstream Ports on the monitor will be ready for use.

To PC

10 USB 2.0 Type-A Port

8 Getting Started

Connecting the Monitor to PC
1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4. Connect the external power supply to the monitor power jack. (Figure B) 5. Plug the power cord into the electrical outlet. (Figure C) 6. Turn on the monitor. (Figure D) 7. Power on the computer and the monitor will auto detect the signal source.

B D

C A

Getting Started 9

OSD Setup
This chapter provides you with essential information on OSD Setup.
Important
All information is subject to change without prior notice.
OSD Keys
The monitor comes with a set of OSD Keys that help to control the On-Screen Display (OSD) menu.

M

E

OSD Key
M

Hot Key (When OSD is OFF) Activating the OSD Main Menu

Mode

Input Source

E

Audio Volume

10 OSD Setup

OSD Setup (When OSD is ON) Entering the submenus. Confirming a selection or setting.
Navigating through function menus and items.
Adjusting function values.
Confirming the selection. Exiting the current menu.

OSD Menus

Important
The following settings will be grayed out when HDR signals are received:

Low Blue Light HDCR Brightness

Contrast Color Temperature

Professional

1st Level Menu Mode
Response Time

2nd/3rd Level Menu Eco User sRGB Anti-Blue Movie Office Black-White Normal Fast Fastest

Description
Use Up or Down Button to select and preview mode effects.
Press the E Button to confirm and apply your mode type.
The default setting “Eco” mode meets the requirements of TÜV Rheinland’s “Low Blue Light” standard and Eyesafe certification.
Setting to Fastest will reach the shortest response time and help improve blurred images when playing very fast games.

OSD Menus 11

1st Level Menu MPRT
Refresh Rate Alarm Clock

2nd/3rd Level Menu OFF ON

Location
OFF ON Location
OFF 15:00 30:00 45:00 60:00

Left Top Right Top Left Bottom Right Bottom
Left Top Right Top Left Bottom Right Bottom
00:01 ~ 99:59

Description

MPRT is available when the refresh rate is 75 Hz.
Activating MPRT will affect:

Affected Function » Brightness » Response Time » HDCR » Adaptive-Sync » Screen Size 1:1
» Type C PD Charge

Function Status Unable to select
Set to OFF Set to Auto Set to OFF & Unable to select

Location is adjustable in OSD Menu. Press the E Button to confirm and apply your Refresh Rate Location.
This monitor follows and works at the Operating System’s preset Screen Refresh Rate.

After setting the time, press the E Button to activate the timer.
Users have to manually restore their preset Alarm Clock after any AC power loss and reconnection.

12 OSD Menus

1st Level Menu Screen Assistance

2nd/3rd Level Menu Eye-Q Check OFF
Amsler Grid Astigmatism Posture Correction

Crosshair

None

Description
Select OFF to disable Eye-Q Check. Select Amsler Grid to check your central
vision field.
Select Astigmatism to check your blurred vision.
Select Posture Correction to improve your posture when sitting.
Through AI algorithm, this function enhances the visibility of in-game crosshair.
Users can select the color and position of the crosshair.

KVM Screen Size Adaptive-Sync

Auto Upstream Type C
Auto 4:3 16:9 OFF ON

Auto allows the monitor to automatically switch between USB input sources, such as keyboards, mice or other USB devices.
Users can also designate Upstream port or USB Type-C as the only USB signal source.
Users can adjust Screen Size in any mode, any resolution and any screen refresh rate.

Adaptive-Sync prevents screen tearing. Activating Adaptive-Sync will affect:

Affected Function » MPRT » Screen Size 1:1

Function Status Set to OFF Set to Auto

OSD Menus 13

Image
1st Level Menu Brightness Contrast Sharpness Image Enhancement
Low Blue Light

2nd/3rd Level Menu 0-100
0-100 0-5
OFF Weak Medium Strong Strongest OFF ON

HDCR

OFF

ON

Color Temperature

Cool Normal Warm Customization

R (0-100) G (0-100) B (0-100)

Description
Properly adjust Brightness according to the surrounding lighting.
Properly adjust Contrast to relax your eyes.
Sharpness improves clarity and details of images.
Image Enhancement enhances image edges to improve their acutance.

Low Blue Light protects your eyes against blue light. When enabled, Low Blue Light adjusts the screen color temperature to a more yellow glow.
When Pro Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light.
This monitor is a Low Blue Light backlight monitor, it would decrease the blue light emitted without adjusting OSD function.
Activating Low Blue Light will affect:

Affected Function Function Status

» Ambient RGB Light

Set to OFF

HDCR enhances image quality by increasing the contrast of images.
Activating HDCR will affect:

Affected Function Function Status

» Brightness

Unable to select

» MPRT

Set to OFF

Use Up or Down Button to select and preview mode effects.
Press the E Button to confirm and apply your mode type.
Users can adjust Color Temperature in Customization mode.

14 OSD Menus

Input Source

1st Level Menu HDMITM DP Type C Auto Scan

2nd Level Menu
OFF ON

Navi Key
1st Level Menu Enter Left Right

2nd Level Menu OFF Brightness Mode Alarm Clock Input Source Refresh Rate Info. On Screen Audio Volume KVM

Description Select an Input Source from the list.
Users can use the Navi Key to select Input Source at below status: · While “Auto Scan” is set to “OFF” with the monitor at power saving mode; · While “No Signal” message box is shown on the monitor.
Description All Navi Key items can be adjusted via OSD Menus.

OSD Menus 15

Setting
1st Level Menu Language
Transparency OSD Time Out Power Button HDMITM CEC
Type C PD Charge

2nd Level Menu English Français Deutsch Italiano Español Português Bahasa Indonesia Türkçe (More languages coming soon) 0~5 5~30s OFF
Standby
OFF ON
OFF ON

Description Users have to press the E Button to confirm and apply
the Language setting. Language is an independent setting. Users’ own
language setting will override the factory default. When users set Reset to Yes, Language will not be changed.
Users can adjust Transparency in any mode. Users can adjust OSD Time Out in any mode. When set to OFF, users can press the power button to
turn off the monitor. When set to Standby, users can press the power button
to turn off the panel and backlight. HDMITM CEC (Consumer Electronics Control) supports
Sony PlayStation®, Nintendo® SwitchTM, Xbox Series X|S consoles and various audio-visual devices that are CEC-capable. If HDMITM CEC is set to ON: · The monitor will automatically power on when the
CEC device is turned on. · The CEC device will enter power saving mode when
the monitor is turned off. · When Sony PlayStation®, Nintendo® SwitchTM, or
Xbox Series X|S console is connected, Mode will be automatically set to Eco mode (Default) and can be adjusted to users’ preferred modes later. Type C PD Charge enables users to charge their devices through a USB Type-C connector, which can deliver up to 65W (20V/3.25A).

16 OSD Menus

1st Level Menu Info. On Screen
Audio Volume Reset

2nd Level Menu OFF ON 0-100 YES NO

Description
The information of the monitor status will be shown on the right side of the screen.
Users can adjust Audio Volume in any mode. Users can Reset and restore settings to original OSD
Default in any mode.

OSD Menus 17

Specifications

Monitor Size Curvature Panel Type Resolution Aspect Ratio Brightness Contrast Ratio Refresh Rate
Response Time
I/O
View Angles DCI-P3*/ sRGB Surface Treatment Display Colors Speaker Monitor Power Options External Power Supply Specs Power Input Power Output Adjustment (Height) Adjustment (Tilt) Adjustment (Swivel) Adjustment (Pivot)

Modern MD272XP Modern MD272XPW 27 inch Flat IPS 1920 x 1080 (FHD) 16:9 300 nits (typ.) 1000:1 100Hz 4ms (GTG) 1ms (MPRT) 14ms (Tr + Tf) DisplayPort x1 HDMITM Connector x1 USB Type-C Port x1 USB 2.0 Type-A Port x2 USB 2.0 Type-B Upstream Port x1 Headphone Jack x1 178°(H) , 178°(V) 89% / 101% Anti-glare 16.7M 8bits (6bits + FRC) 3W x2 19V 5.79A Model: ADS-110CL-19-3 190110G 100~240Vac, 50~60Hz, 1.5A Max 19V 5.79A 0 ~ 110mm -5° ~ 20° -30° ~ 30° -90° ~ 90°

18 Specifications

Monitor

Modern MD272XP Modern MD272XPW

Kensington Lock

Yes

VESA Mounting

Plate Type: 75 x 75 mm Screw Type: M4 x 10 mm
· Thread Diameter: 4 mm · Thread Pitch: 0.7 mm · Thread Length: 21/ 24 mm

Dimension (W x D x H)

613.5 x 200.8 x 413.3 mm

Weight

Net Gross

5.7 kg 8.0 kg

Environment

Operating

Temperature: 0 to 40 Humidity: 20% to 90%, non-condensng Altitude: 0 ~ 5000m

Storage

Temperature: -20 to 60 Humidity: 10% to 90%, non-condensing

* Based on CIE1976 test standards.

Specifications 19

Preset Display Modes

Important
All information is subject to change without prior notice.

Standard

Resolution

HDMITM DP

Full HD

1920×1080 @60Hz V

V

@85Hz V

V

@100Hz V

V

Video Timing Resolution 720P

V

V

1080P

@60Hz V

V

USB-C V V V V V

20 Preset Display Modes

Troubleshooting
The power LED is off.
· Press the monitor power button again. · Check if the monitor power cable is properly connected.
No image.
· Check if the computer graphics card is properly installed. · Check if the computer and monitor are connected to electrical outlets and are
turned on. · Check if the monitor signal cable is properly connected. · The computer may be in Standby mode. Press any key to activate the monitor.
The screen image is not properly sized or centered.
· Refer to Preset Display Modes to set the computer to a setting suitable for the monitor to display.
No Plug & Play.
· Check if the monitor power cable is properly connected. · Check if the monitor signal cable is properly connected. · Check if the computer and graphics card are Plug & Play compatible.
The icons, font or screen are fuzzy, blurry or have color problems.
· Avoid using any video extension cables. · Adjust brightness and contrast. · Adjust RGB color or tune color temperature. · Check if the monitor signal cable is properly connected. · Check for bent pins on the signal cable connector.
The monitor starts flickering or shows waves.
· Change the refresh rate to match the capabilities of your monitor. · Update your graphics card drivers. · Keep the monitor away from electrical devices that may cause electromagnetic
interference (EMI).
Troubleshooting 21

Safety Instructions
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or User Guide should be noted.
Refer servicing to qualified personnel only.
Power
Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet.
If the power cord comes with a 3-pin plug, do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-outlet.
Please confirm the power distribution system in the installation site shall provide the circuit breaker rated 120/240V, 20A (maximum).
Always disconnect the power cord or switch the wall socket off if the device would be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord.
If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Battery
Please take special precautions if this device comes with a battery.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, which can result in an explosion.
Avoid leaving a battery in an extremely high temperature or extremely low air pressure environment that can result in an explosion or the leakage of flammable liquid or gas.
Do not ingest battery. If the coin/button cell battery is swallowed, it can cause severe internal burns and can lead to death. Keep new and used batteries away from children.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

BSMI:

For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

22 Safety Instructions

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/
Environment
To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
Use this device only on a hard, flat and steady surface. To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it safe in place. To prevent fire or shock hazard, keep this device away from humidity and high temperature. Do not leave the device in an unconditioned environment with a storage temperature above 60 or below -20, which may damage the device. The maximum operating temperature is around 40. When cleaning the device, be sure to remove the power plug. Use a piece of soft cloth rather than industrial chemical to clean the device. Never pour any liquid into the opening; that could damage the device or cause electric shock. Always keep strong magnetic or electrical objects away from the device. If any of the following situations arises, get the device checked by service personnel: · The power cord or plug is damaged. · Liquid has penetrated into the device. · The device has been exposed to moisture. · The device does not work well or you can not get it working according to the User
Guide. · The device has dropped and damaged. · The device has obvious sign of breakage.
Safety Instructions 23

TÜV Rheinland Certification
TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
Place the screen 20 ­ 28 inches (50 ­ 70 cm) away from your eyes and a little below eye level.
Consciously blinking the eyes every now and then will help to reduce eye strain after extended screen time.
Take breaks for 20 minutes every 2 hours.
Look away from the screen and gaze at a distant object for at least 20 seconds during breaks.
Make stretches to relieve body fatigue or pain during breaks.
Turn on the optional Low Blue Light function.
TÜV Rheinland Flicker Free Certification
TÜV Rheinland has tested this product to ascertain whether the display produces visible and invisible flicker for the human eye and therefore strains the eyes of users.
TÜV Rheinland has defined a catalogue of tests, which sets out minimum standards at various frequency ranges. The test catalogue is based on internationally applicable standards or standards common within the industry and exceeds these requirements.
The product has been tested in the laboratory according to these criteria.
The keyword “Flicker Free” confirms that the device has no visible and invisible flicker defined in this standard within the range of 0 – 3000 Hz under various brightness settings.
The display will not support Flicker Free when Anti Motion Blur/MPRT is enabled. (The availability of Anti Motion Blur/MPRT varies by products.)
ENERGY STAR Certification
ENERGY STAR is a program run by the U.S. Environmental Protection Agency (EPA) and U.S. Department of Energy (DOE) to promote energy efficiency. This product qualifies for ENERGY STAR in the “factory default” settings through which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption, which could exceed the limits necessary to qualify for ENERGY STAR rating.
For more information on ENERGY STAR, refer to https://www.energystar.gov/.
24 TÜV Rheinland Certification

Regulatory Notices
CE Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment published under Directives of Official Journal of the European Union.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
www.msi.com
Regulatory Notices 25

WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and Electronic Equipment, Directive 2012/19/EU, products of “electrical and electronic equipment” cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.com/global/index
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates that manufacturers provide material declarations for certain categories of electronic products offered for sale after July 1, 2006. https://csr.msi.com/global/Japan-JIS-C-0950-Material-Declarations
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of 10 March 2017, 139, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
26 Regulatory Notices

Green Product Features
Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy
Environmental Policy
The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
Visit the MSI website and locate a nearby distributor for further recycling information.
Users may also reach us at [email protected] for information regarding proper disposal, take-back, recycling, and disassembly of MSI products.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time. 2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
The terms HDMITM, HDMITM High-Definition Multimedia Interface, HDMITM Trade dress and the HDMITM Logos are trademarks or registered trademarks of HDMITM Licensing Administrator, Inc.
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please visit https://www.msi.com/support/ for further guidance.
Regulatory Notices 27

References

• MSI - Redirect
• csr
• csr
• dtsc.ca.gov/perchlorate/
• ENERGY STAR | The simple choice for energy efficiency.
• Support | MSI Global