Sealey Vs7102 4pc Engine Oil Funnel Set Instructions

SEALEY VS7102 4PC ENGINE OIL FUNNEL SET

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.

• DO NOT use tools if damaged.
• Maintain tools in a good, clean condition for best and safest performance.
• Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
• Wear suitable clothing to avoid snagging. DO NOT wear jewelry and tie back long hair.
• Keep children and unauthorized persons away from the work area.
• When not in use, store in a secure, childproof location.
• Keep the working area clean and tidy, dry and free from unrelated materials
• Ensure the working area has adequate lighting

INTRODUCTION

Fastens and seals into the engine filler with two manufacturer-specific adaptors. Covering a large proportion of modern vehicles for both Renault and Nissan. Hands-free operation with no mess or spills. See instructions on the Sealey website for a complete list of vehicle applications.

SPECIFICATION

Adaptors: 1 x Bayonet – 8mm Lugs, 1 x Bayonet – 6mm Lugs.

OPERATION

ASSEMBLY

• Apply the adhesive (not supplied) around the fine threads on the transparent chamber (fig.1). Connect the transparent chamber to the upper funnel part (fig.1) to form a complete funnel.
• IN USE NOTE: Ensure the engine is cool before using a funnel.
• Remove original oil cap on engine.
• Connect oil funnel or funnel with a required adapter to oil filler neck.
• Make sure the funnel is securely connected to the engine before filling.
• Disconnect oil funnel from oil filler neck after oil is refilled.
• Clean residual oil inside the funnel and store the funnel in dry and well-ventilated place.

APPLICATION

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling center and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.

Warranty

The guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

• 01284 757500
• 01284 703534
• [email protected]
• www.sealey.co.uk

References

• Sealey - Leading Professional Tool & Workshop Equipment Supplier