ULINE Gamma Seal Lid Instructions
TOOL NEEDED
Rubber Mallet
ASSEMBLY
TO ATTACH LID
Using proper closing equipment, such as a plate or roller closure, is recommended. If this equipment is not available, follow the instructions below.
ALIGN AND SECURE LID
- Separate lid from
(See Figure 1)
- Put ring on pail and use a rubber mallet to secure, starting at point 1. Work clockwise around the ring tapping down each numbered point until the ring snaps in place.
(See Figure 2)
NOTE: Ring is permanent once attached to pail. - Screw on lid.
(See Figure 3)
