STM32CubeProgrammer Software
Product Information:
The product being referred to in the user manual is the
STM32CubeProgrammer. It is a software tool developed by
STMicroelectronics for programming STM32 microcontrollers. The
STM32CubeProgrammer provides a user-friendly interface for
programming and debugging STM32 devices and supports various
programming methods such as JTAG, SWD, and UART.
The software can be downloaded from the official
STMicroelectronics website using the following link: https://www.st.com/en/development-tools/stm32cubeprog.html
Product Usage Instructions:
- Download the STM32CubeProgrammer software by visiting the
following link: https://www.st.com/en/development-tools/stm32cubeprog.html - Prepare a USB stick with the necessary update files. Ensure
that the update files are compatible with the
STM32CubeProgrammer. - Locate the restart switch on the right side of the device.
- While holding the Boot0 button, press the restart switch. This
will put the device into bootloader mode. - Launch the STM32CubeProgrammer software on your computer.
- Connect the USB stick containing the update files to the lower
USB port on the right side of the device. - Wait for the update process to complete. Once finished, the
device will automatically restart.
Please note that it is important to follow the given
instructions carefully to ensure successful programming and
updating of the STM32 microcontrollers using the
STM32CubeProgrammer software.
1. Download STM32CubeProgrammer https://www.st.com/en/development-tools/stm32cubeprog.html
2. Prepare a USB stick with update files
3. Press the restart switch on the right side while holding the Boot0 button 4. Run STM32CubeProgrammer
5. Connect the prepared USB memory stick to the lower USB port on the rght side of the device. After the Update is done the device will restart automatically
STM32CubeProg - STM32CubeProgrammer software for all STM32 - STMicroelectronics
