Simulator Par 3 Enclosure
Product Information
The Golf Simulator Enclosure comes in two separate cartons: one
long carton containing the metal frame, and one rectangular carton
containing the enclosure material with the screen. The enclosure
material is a single piece construction that includes the projector
screen, side and ceiling panels. The poles required for assembly
include 12 x 3.3ft (1m) poles (A), 11 x 3.3ft (1m) poles (B), 5 x
2ft (0.6m) poles (C), 4 x 1.8ft (0.55m) poles (D), and 1 x 3.3ft
(1m) pole (F). The frame assembly identification parts include
connectors and crossover clamps.
Product Usage Instructions
Step 1: Assemble the upper frame using parts D
and A, and poles A, B, and F. Connect the poles to the frame using
the corresponding connectors and crossover clamps.
Step 2: Attach the projector mounts to the
upper frame using the parts A, F, and A.
Step 3: Assemble the lower frame using parts B
and C, and poles B, C, and D. Connect the poles to the frame using
the corresponding connectors and crossover clamps.
Step 4: Connect the upper frame to the lower
frame using part B.
Step 5: Attach the enclosure material with
screen to the frame using parts A and B.
Step 6: Insert any additional accessories as
needed.
Note: It is recommended that two people work
together to assemble the Golf Simulator Enclosure. All poles should
be fully inserted into the connectors and crossover clamps for
maximum stability and safety.
Pa c k a g i n g
01
Packaging
Your Golf Simulator Enclosure will come in 2 separate cartons:
1 x long carton – metal frame
1 x rectangular carton – enclosure material with screen
Poles
Male Male
Male
Packaging
02
Male Male
A
12 x 3.3ft (1m) pole
B
11 x 3.3ft (1m) pole
C
5 x 2ft (0.6m) pole
D
4 x 1.8ft (0.55m) pole
F
1 x 3.3ft (1m) pole
Female Female
Female Male
Hole
Connectors
1
Packaging
2
4
03
5
2 x 105° 3-way connector 2 x 105° 3-way connector 2 x 2-way feet connector 2 x 3-way feet connector
X
2 x crossover clamp
Packaging
04
Enclosure material with Screen
The enclosure material is a single piece construction containing the projector screen, side and ceiling panels
Poles
Frame Assembly Identification Parts
05
B D
A B
A
BA A
A
A
F
A
D
B
C D
B
A
C B
B
A
B
C
D
A B
A
B
C A B
F r a m e A s s e m b ly I d e n t i f i c at i o n Pa rt s
06
Connectors
2
1 1
2
5
4 5
4
Assembly STEP 1
07
Step 1
Assemble the upper frame
D A
1
A
B
B
A
2
B
BA
A
D
2
B
A
B
A B
1
A
B
Assembly STEP 2
08
Step 2
Attach projector mounts to the upper frame
A A F
