National Cycle N20337 Vstream Windscreen Installation Guide

N20337 VStream Windscreen

Product Information

Product Name: VStream Windscreen

Part Numbers:

  • N20337 – Light Tint, Sport
  • N20338 – Light Tint, Sport-Tour
  • N20339 – Clear, Touring

Description: The VStream Windscreen is a
high-quality accessory designed for motorcycles. It provides
protection against wind and debris while enhancing the aerodynamics
of your ride.

Contents of Kit:

ITEMDESCRIPTIONQTY.
AVStream Windscreen1

Tools Required: 4mm Hex Key

Product Usage Instructions

  1. Place your motorcycle securely on its sidestand.
  2. Remove the existing windscreen (if any) and keep all OEM
    fasteners for reinstallation.
  3. Install the VStream Windscreen onto the motorcycle’s mounting
    hardware, aligning the mount holes.
  4. Reinstall the OEM Allen Screws and Washers to secure the
    windscreen in place.
  5. Using a 4mm Hex Key, tighten all four OEM Allen Screws
    securely. Be careful not to overtighten.
  6. Ensure that all fasteners are tightened properly before
    riding.
  7. Ride safely and enjoy the improved riding experience with your
    new VStream Windscreen!

Important Safety Information:

  • Regularly check the tightness of the accessory mounting
    hardware to prevent any accidents caused by loose fasteners.
  • If the windscreen affects the stability of your motorcycle,
    remove it immediately and seek professional assistance.
  • Do not ride a motorcycle that exhibits unsafe handling traits
    due to the windscreen or any other accessory. Address any handling
    problems before riding.
  • Avoid parking your motorcycle in direct sunlight, as sunlight
    reflected off the inside curvature of the windscreen can cause
    extreme heat buildup on the instruments. Park your motorcycle
    facing away from the sun or use an opaque object to shield the
    instruments.

Register Your Windshield: Visit www.nationalcycle.com to
register your VStream Windscreen online.

Warranty Information: The VStream Windscreen
comes with a 3-Year Limited Warranty. For further details, visit
www.nationalcycle.com
or contact National Cycle via phone or email.

Quantum® Hardcoated Polycarbonate VStream® Windscreen for: Yamaha® Ténéré 700

N20337 Light Tint, Sport N20338 Light Tint, Sport-Tour N20339 Clear, Touring

VStream® Windscreen Patent No. 7,387,328

Thank you for purchasing a National Cycle product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this windshield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.

Description: Part Number:

VStream® Replacement Windscreen N20337/N20338/N20339

Model: Installation Time:

2020-Later Yamaha® Ténéré 700 10 min. Difficulty Level: Easy

CONTENTS OF KIT

ITEM

DESCRIPTION

A

VStream Windscreen

QTY. 1

TOOLS REQUIRED 4mm Hex Key

ALL OEM FASTENERS WILL BE REUSED.

ATTENTION: Special notes and cautionary measures which can prevent damage to the accessory or vehicle.

NOTE: Tips for facilitation of operation, control and adjustment, as well as maintenance work.

PREPARATION Place motorcycle securely on its sidestand.
All OEM fasteners will be reused.
OEM WINDSHIELD REMOVAL Figure 1 With a 4mm Hex Key, loosen and remove all four Allen Screws and Washers holding the OEM Windscreen to the mounting bracket. Screws and Washers will be reused for installation of your new VStream® Windscreen.

Figure 1

National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA ©2020 National Cycle, Inc.

P: 708-343-0400 / F: 708-343-0625 / E: [email protected] Page 1 of 2

www.nationalcycle.com 10-129485-000 09/20

WINDSCREEN INSTALLATION
Figure 2 Install the Windscreen onto the motorcycle’s mounting hardware and align the mount holes. Reinstall the OEM Allen Screws and Washers.
With a 4mm Hex Key, tighten all four OEM Allen Screws securely. Do not overtighten.
Ride safe and enjoy your new VStream Windscreen!

Figure 2
CLEANING AND MAINTENANCE To clean the screen, wash with a clean soft cloth and plenty of warm water and, if necessary, a non-abrasive soap such as dishwashing liquid. Flannel or soft chamois make good cleaning cloths. Paint, glue residue or grease removal: Moisten cotton wad with naphtha or turpentine followed by a wash as above. National Cycle Shield WashTM (N1401-01) makes a good daily cleaner and comes with a handy travel-size bottle. Shield Wash is safe for all windshields and helmet visors Do not clean polycarbonate in hot sun or high temperatures. Do not clean the screen with household glass cleaners. Do not allow brake fluid, alcohol, or strong solvents to contact the screen. RAIN REPELLENT Do not use rain protective products made for glass. We recommend National Cycle’s RainZip® (N1410-01) to keep your windscreen clear in rainy weather.

Register Your Windshield Online at www.nationalcycle.com
National Cycle 3-Year Limited Warranty
National Cycle hereby warrants to the original registered owner of a National Cycle polycarbonate windshield for a period of three years from the date of purchase against breakage. This limited warranty is expressly limited to the replacement of the polycarbonate windscreen. This limited warranty does not include scratches, coating failure, cosmetic wear and tear, replacement of hardware, or any consequential damages or expenses including labor cost of installation, removal and/or replacement, inconvenience, inbound freight expenses or damage to any other component of the motorcycle or any other accessories. Certain chemicals, generally known as acidic hydrocarbons, are known to cause polycarbonate damage and will not be covered under this limited warranty. Please refer to the cleaning instructions supplied with all National Cycle windshields.
Visit www.nationalcycle.com for further details, or call or e-mail National Cycle.
WARNING
Never ride your motorcycle with loose accessory mounting hardware. Check the hardware for tightness regularly.
Today’s motorcycles are built to withstand the moderate loads imposed on them by the foreseeable addition of an accessory(ies). If an accessory(ies) adversely affects your motorcycle’s stability, immediately remove the accessory(ies). Do not ride a motorcycle that exhibits unsafe handling traits.
Have experienced service personnel correct any problem before riding with the accessory(ies) installed. For further questions concerning handling problems associated with an accessory(ies), contact your dealer, motorcycle manufacturer, or accessory manufacturer.
Sunlight reflected off the inside curvature of the windscreen can, at certain times of day, cause extreme heat buildup on the motorcycles instruments and possibly even melt them. Exercise care in parking to avoid this. Park your motorcycle facing the sun or place an opaque object over this area.

National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 USA ©2020 National Cycle, Inc.

P: 708-343-0400 / F: 708-343-0625 / E: [email protected] Page 2 of 2

www.nationalcycle.com 10-129485-000 09/20

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals