Contents hide

EH-NA67 Hair Dryer

Product Information:

Product Name: Panasonic Hair Dryer

Model Number: EH-NA67

About nanoeTM: nanoeTM is a trademark of
Panasonic Holdings Corporation. It refers to nano-sized ion
particles coated with water particles.

Safety Precautions:

Before using the hair dryer, it is important to observe the
following safety precautions:

Read and follow all instructions provided in the user
manual.
Do not use the hair dryer with the cord bundled as it may cause
fire or electric shock.
Ensure that the plug and cord are not damaged or hot before
use.
Never use the hair dryer if the plug fits loosely in a
household outlet.
Avoid connecting or disconnecting the plug to a household
outlet with wet hands to prevent electric shock or injury.
Do not wrap the cord tightly around the main body when storing
to avoid wire breakage and potential electric shock or fire.
Avoid storing or using the cord in a twisted state to prevent
wire breakage and potential electric shock or fire.
Disconnect the plug by holding onto it instead of pulling on
the cord to avoid wire breakage.

Product Usage Instructions:

Follow these steps to use the Panasonic Hair Dryer (Model No.
EH-NA67):

Ensure that the hair dryer is connected to a power source.
Adjust the desired heat and speed settings using the control
buttons.
Hold the hair dryer at a safe distance from your hair,
preferably 15-20 cm away.
Direct the airflow towards your hair, moving the hair dryer in
a sweeping motion for even drying.
Continue drying until your hair is dry and styled as
desired.
After use, disconnect the hair dryer from the power source and
allow it to cool down before storing.

Please refer to the user manual for detailed maintenance
instructions, troubleshooting tips, and specifications of the
product.

View Fullscreen

English……………………………………… 3

Operating Instructions (Household use) Hair Dryer
Model No. EH-NA67

EH-NA67 AUS_EH9210NA677651.indb 1

21/4/2565 BE 10:22

2
EH-NA67 AUS_EH9210NA677651.indb 2

21/4/2565 BE 10:22

English

Operating Instructions (Household use) Hair Dryer
Model No. EH-NA67

Contents

Safety precautions………………… 4 About nanoeTM …………………………….. 11

Parts identification …………………………8 Maintenance of the hair dryer ………. 11

How to use the hair dryer ……………….9 Troubleshooting …………………………..14

The best recommended usage of

Specifications ………………………………14

the oscillating quick-dry nozzle …….10

Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use.
EH-NA67 AUS_EH9210NA677651.indb 3

3
21/4/2565 BE 10:22

English

nanoeTM is a trademark of Panasonic Holdings Corporation. A nanoeTM is a nano-sized ion particle coated with water
particles.

Safety precautions

To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.

Explanation of symbols

The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.

Denotes a potential
WARNING hazard that could result in serious injury or death.

CAUTION

Denotes a hazard that could result in minor injury or property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a specific operating procedure that must not be performed.
This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.

Some parts of the safety precaution illustrations differ from the actual product.
4

WARNING
Plug and Cord
Do not use with the cord bundled. – Doing so may cause fire or electric shock.
Do not damage the cord or plug. · Do not deface, modify, forcefully bend or pull the
cord or plug. Also, do not place anything heavy on, twist or pinch the cord. – Doing so may cause electric shock, burn or fire due to a short circuit.
Do not use when the plug or cord is damaged or hot. – Doing so may cause burn, electric shock, or fire due to
a short circuit.
Never use the appliance if the plug fits loosely in a household outlet. – Doing so may cause burn, electric shock, or fire due to
a short circuit.
Do not connect or disconnect the plug to a household outlet with a wet hand. – Doing so may cause electric shock or injury.
Do not wrap the cord tightly around the main body when storing.
– Doing so may cause the wire in the cord to break with the load, and may cause electric shock, burn or fire due to a short circuit.
Do not store or use the cord in a twisted state. – Doing so may cause the wire in the cord to break with
the load, leading to electric shock or fire due to a short circuit.

EH-NA67 AUS_EH9210NA677651.indb 4

21/4/2565 BE 10:22

English

WARNING
Disconnect the plug by holding onto it instead of pulling on the cord. – Failure to do so may cause the wire in the cord to
break, and may cause burn, electric shock, or fire due to a short circuit.
Regularly clean the plug to prevent dust from accumulating. – Failure to do so may cause fire due to insulation failure
caused by humidity. Disconnect the plug and wipe with a dry cloth.
Always turn off the power switch and disconnect the plug from the household outlet after use. – Failure to do so may cause fire or burn.
Use the household outlet alone: do not use with an extension cord. Fully insert the plug. Always ensure the appliance is operated on an electric power source matched to the rated voltage indicated on the appliance. – Failure to do so may cause fire or electric shock.
When the hair dryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hair dryer is switched off. – Failure to do so may cause an accident or injury.
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice. – Failure to do so may cause an accident or injury.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. – Failure to do so may cause an accident or injury. In case of an abnormality or malfunction Immediately stop using and remove the plug if there is any abnormality or malfunction. – Failure to do so may cause fire, electric shock, or
injury. <Abnormality or malfunction cases> · Air is not emitted · Unit stops sporadically · Interior becomes red-hot and smoke is emitted · The appliance is damaged or deformed, or strange
noise is emitted. – Immediately request inspection or repair at an
authorized service center. Maintenance
If you see sparks around the air outlet while using the hot air setting, stop use and remove the lint on the air outlet and air inlet. – Failure to do so may cause burn or fire. This appliance Do not block or insert hair pins or other foreign objects into the air inlet, air outlet or nanoeTM outlet. – Doing so may cause fire, electric shock, or burn.
5

EH-NA67 AUS_EH9210NA677651.indb 5

21/4/2565 BE 10:22

English

WARNING
Do not leave the product with the power switch on. – Doing so may cause fire.
Do not store the appliance in a bathroom or location with high humidity. Also, do not place in a location where water may spill (such as top of vanity). – Doing so may cause electric shock or fire.
Do not keep within the reach of infants or young children. Do not let them use the appliance. – Doing so may cause burn, electric shock, or injury.
Do not use in proximity of flammable materials (such as alcohol, benzine, thinner, spray, hair care product, nail polish remover). – Doing so may cause an explosion or fire.
Never modify, disassemble, or repair. – Doing so may cause ignition or injury due to abnormal
operation. Contact an authorized service center for repair.
Do not use the appliance with a wet hand. – Doing so may cause electric shock or fire due to a
short circuit.
This appliance is not designed for commercial use, and is not intended for use without appropriate maintenance. – Doing so may cause burn or fire due to a continuous
load or overload.
6
EH-NA67 AUS_EH9210NA677651.indb 6

Do not immerse the appliance in water. Do not use this appliance near water. Do not use this appliance near bathtubs, showers, basins or other vessels containing water. – Doing so may cause electric shock or fire.
This symbol with prohibition sign in red on the appliance means “Do not use this appliance near water”. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. – Failure to do so may cause an accident or injury.
21/4/2565 BE 10:22

English

CAUTION

To protect your hair

Do not use with the air inlet damaged. – Your hair may get tangled in the air inlet, which could
damage the hair.

Be sure to keep a distance of over

3 cm between the air outlet and your

hair.

– Failure to do so may cause burns to

the hair.

Be sure to keep your hair at least 10 cm away from the air inlet. – Your hair may get tangled in the air
inlet, which could damage the hair.

Note the following precautions

Do not drop or subject to shock. – Doing so may cause electric shock or ignition.

Only use for drying or styling human hair. (Do not use on pets, or to dry clothing, shoes, etc.) – Doing so may cause fire or burn.
Do not use on children under 6 years old. – Doing so may cause burn.

Do not touch the air outlet, concentrator nozzle, oscillating quick-dry nozzle, and diffuser which will become very hot. – Doing so may cause burn.

Never use the appliance with the filter removed. – Your hair may get dangled in the air inlet, which could
damage the hair.
Do not wash the filter in water. – Doing so may cause fire or electric shock.
Notes · This appliance is equipped with an automatic overheating
protective device. If the appliance overheats, it will switch to cold air mode. Switch off the appliance and unplug it from the household outlet. Allow it to cool down for a few minutes before using it again. Check that no fluff, hair etc. is in the air inlets and outlets before switching it on again. · You may notice a characteristic odor when using this appliance. This is caused by the ozone it generates and is not harmful to the human body.

EH-NA67 AUS_EH9210NA677651.indb 7

7
21/4/2565 BE 10:22

English

Parts identification

C B A

L
D E F G
H I

M
N O P

Concentrator nozzle Focuses and concentrates airflow for precise drying. Oscillating quick-dry nozzle Delivers strong and soft airflows for fast drying. Automatically moves to prevent hot spots for more gentle drying.
Attach the oscillating quick-dry nozzle so this air outlet is vertical.
Diffuser For creating full-bodied hair with lots of volume and styling

A Air outlet B Concentrator nozzle C nanoeTM outlet D nanoeTM lamp E Cool-shot button F Handle

K Power switch ( ) 3: Turbo (Very strong airflow) 2: Dry (Strong airflow) 1: Set (Gentle airflow) 0: Off

G Ring for hanging

L Air inlet grille

H Cord

M Filter

I Power plug

Make sure to attach the

J Temperature selector ( ) filter to the air inlet when

: Hot (Hot air)

using the hair dryer.

: Warm (Warm air)

N Panel

: Healthy (Mild air)

O Oscillating quick-dry nozzle

: Cool (Cool air)

P Diffuser

EH-NA67 AUS_EH9210NA677651.indb 8

21/4/2565 BE 10:22

English

How to use the hair dryer
Always check that the filter is securely attached before using.
1 Select the temperature of the airflow with the temperature selector (J).
2 Select the intensity of the airflow with the power switch (K).
Notes · The air remains cool while the cool-shot button is held down. · nanoeTM is produced when the power switch (K) is set to
position 1 to 3. · nanoeTM is invisible to the naked eye. · If you are worried about hair damage, set the switch to
“1: Set (Gentle airflow)” before use. · Drops of water may blow out of the nanoeTM outlet (C)
during use, but this is not a malfunction. · A humming noise may come out of the nanoeTM outlet (C),
but this is the sound of nanoeTM being discharged and is not a malfunction. · The effects of nanoeTM might not be felt by the following people. People with crimpy hair, strong curly hair, very smooth hair, short hair, or who have had a hair straightening perm in the last three or four months. · You may notice a characteristic odor when using this hair dryer. This is not harmful to the human body. · Do not look into the air outlet while in use.

To define the curls and waves with a diffuser 1. Gently place the tip of your hair on the diffuser. 2. Lift your curls up and down from your scalp
whilst they are drying. 3. Repeat all sections. 4. Finally, adjust the overall finished look with your hands.
To increase hair volume with a diffuser Attain volume by moving the diffuser in a circular motion over the scalp. Keep the diffuser held on specific areas of your head for a few seconds to attain volume as you wish. Repeat until your desired look is achieved.
To adjust hair flow with a diffuser Comb the hair with a diffuser to dry the hair from the roots to the tips while pulling the ends of the hair.

EH-NA67 AUS_EH9210NA677651.indb 9

9
21/4/2565 BE 10:22

English

The best recommended usage of the oscillating quick-dry nozzle

· The oscillating quick-dry nozzle will work only if you pull out the nozzle (see arrow). You need to hold the base of the nozzle in your hand and pull out the upper part until it has clicked.
· When using the oscillating quick-dry nozzle in automatic swing mode, make sure to set the wind speed to “3”.

1. Please confirm that

(Turn on the automatic

the power switch is

swing mode)

set to the position

“0” before using the oscillating quick-dry nozzle. 2. Hold the both sides

Oscillating quick-dry nozzle

of the oscillating

quick-dry nozzle

with your hands, and

pull it out gently with

Pull it out gently “Click” position

force until you hear

a “click” sound,

indicating that the

automatic swing mode of the oscillating quick-dry nozzle has been turned on.

3. Choose the temperature of

wind as required.

4. Set the power switch to “3”. · If you want to dry your hair
quickly, it is recommended

to choose the mode

“3” + “Hot” or “Warm”.

5. Dry your hair, then

(Turn off automatic

turn off the automatic swing mode for the

swing mode)

oscillating quick-dry Oscillating

nozzle before tidying quick-dry

your hair.

nozzle

· Make sure that the

power switch is set to

the position “0”.

· Hold both sides of the oscillating quick-dry nozzle with

Lightly press “Click” position inward

your hands, and

slightly press it

inward with force until you hear a “click” sound, indicating

that the automatic swing mode of the oscillating quick-dry

nozzle has been locked.

6. Set the wind speed to “1”, then set the temperature of the

wind to “Cool “. Finally, set your hair according to your own particular preferences.

Notes · Oscillating quick-dry nozzle may not function properly at low
power mode “1”.
· Illustrations are translucent here for easier understanding.

EH-NA67 AUS_EH9210NA677651.indb 10

21/4/2565 BE 10:22

English

About nanoeTM

Maintenance of the hair dryer

What is nanoeTM?
(nanoeTM, generation method: high voltage discharge) nanoeTM is generated by collecting the available moisture in the air, so depending on the usage environment, nanoeTM may not be generated. In environments of low temperature and low humidity, moisture in the air becomes difficult to collect. When this occurs, negative ions are generated. nanoeTM are ions wrapped in water that are invisible to the human eye.
How nanoeTM works
Generally hair have properties which make it easy to become positively charged with electricity. These properties attract strongly negatively charged nanoeTM which penetrates the hair with moisture. Furthermore, they make the hair slightly acidic, tighten cuticles and keep your hair strong, elastic and healthy.
Panel effect

Always turn the power switch off and disconnect the plug from the household outlet. (Except when performing maintenance on the air outlet)

Maintaining the main body

Do this when dirty To clean the hair dryer (when it is dirty), soak a cloth in the soapy water and squeeze it out firmly, then wipe with the cloth.
Notes · Do not use substances such as alcohol, nail
polish remover or detergent (hand soap). Doing so may result in malfunction or part cracks or discoloration. · Do not leave the appliance with hairdressing products or cosmetics on it. Doing so will cause deterioration of the plastic, leading to discoloration and cracks.

alcohol
polish remover

When nanoeTM continues to strike hair, hair becomes negatively charged. As a result, the nanoeTM and negatively charged hair repel each other, making it difficult for nanoeTM to reach hair. With the nanoeTM Charge System, by just gripping the panel together with the handle, the negative charge accumulated on hair is released. Because of this, nanoeTM continues to penetrate into hair, supplying moisture and thoroughly moistening down to the tips of hair.

EH-NA67 AUS_EH9210NA677651.indb 11

21/4/2565 BE 10:22

English

Maintaining the nanoeTM outlet

· Use commercially available cotton swabs. (We recommend

the thin cotton swabs made for use with babies.)

· This maintenance allows the hair dryer to sustain the

generated level of nanoeTM over a long period.

1. Dampen the end of the cotton swab with tap water.
2. A needle portion is located deep within the nanoeTM outlet. Using the swab, rub

Gently rub the tip of the needle portion
cotton swab

this portion gently about 5

times.

nanoeTM outlet

Maintaining the air inlet

Clean the air inlet once a month or over.

· When dust etc. has built up, detach the filter from the hair

dryer and remove the dust etc. using a toothbrush or vacuum

cleaner.

· Use a commercially available toothbrush.

1. Pull on the catch on the

Filter

bottom side of the filter to

detach.

2. Remove any dust etc. adhered to the filter or air inlet grille. · Remove the dust etc. adhered to the outside of the filter using a vacuum cleaner. If this does not remove the dust, use the thick part of your fingers to push the dust etc. through the fine mesh on the internal side towards the metal mesh on the external side, and scrub away carefully with a toothbrush. · Using the toothbrush, carefully scrub away any dust etc. from the internal side of the filter. · Using a vacuum cleaner or toothbrush, carefully remove any dust etc. adhered to the air inlet. · Rubbing forcefully with your nails may tear the filter, so please use a toothbrush.
3. Attach the filter securely, starting with the upper side. · Keep pressing until you hear a “click” from both upper and lower catches.

12
EH-NA67 AUS_EH9210NA677651.indb 12

Catch

21/4/2565 BE 10:22

Maintaining the air outlet

· The hair dryer should be plugged into the household outlet

only in case of maintenance for the air outlet.

· Use a commercially available toothbrush.

· Switch the temperature selector

to “Cool” and blow away the

dust etc. as you scrub with the

toothbrush.

· During maintenance, do not

block the air inlet with your

hands etc.

· Be careful when using the hair dryer for the first time after maintenance, since it may blow out dust etc.

Scrub to remove any dust, hair etc. blocking the mesh.

EH-NA67 AUS_EH9210NA677651.indb 13

13
21/4/2565 BE 10:22

English

Troubleshooting

Problem

Possible cause

Action

It switches frequently to cold air while using in “Hot” mode, or sparks can be seen within the body. (These sparks are caused by the thermostat switch, the protective device, and this is not dangerous.)

Lint has accumulated on the air inlet or air outlet.
Hair or something is blocking the air inlet.

Remove accumulated lint. Do not block the air inlet.

The hot air is abnormally hot.

The power plug is abnormally hot.

The connection to the household outlet is loose.

Use a household outlet that fits securely.

Sparks are generated inside the nanoeTM outlet.
The nanoeTM outlet emits a noise (crackling noise).

Abnormality caused by a dirty electrode (needle portion).

Perform maintenance of the nanoeTM outlet.

If the problems still cannot be solved, contact the store where you purchased the unit or a service centre authorised by Panasonic for repair.

Specifications

Product model