46814 Traditional 4-Light Bronze Vanity Light with Frosted Glass Shade
Product Information
The product is a light fixture that comes with a glass shade and
a mounting unit. It requires assembly and installation, which can
be done using the hardware included in the package. The package
includes ball nuts, mounting screws, wire nuts, and other tools
like a ladder, safety glasses, electrical Phillips, tape,
screwdriver, flat blade screwdriver, pliers, and wire strippers.
The product also has an exploded parts diagram that shows the
mounting unit, mounting screws, ball nuts, fixture, and wire nuts.
The product requires electrical connection from the junction box to
the fixture using the black or red wire (hot) from the junction
box, white wire (neutral) from the junction box, and bare or green
ground wire from the junction box. The fixture has black wire from
the fixture, white wire from the fixture, and ground wire from the
fixture.
Product Usage Instructions
- Unscrew the ball nuts from the mounting unit.
- Use the mounting screws to attach the mounting unit to the
junction box. - Make the electrical connection from the junction box to the
fixture. Connect the ground wire to the mounting unit using the
preinstalled green ground screw. Then, connect the positive,
negative and ground wires with the supplied wire nuts. Secure with
electrical tape.
- Black or Red wire (hot) from the junction box
- White wire (neutral) from the junction box
- Bare or Green ground wire from the junction box
- Black wire from the fixture
- White wire from the fixture
- Ground wire from the Fixture
shown, and secure it with ball nuts.
fixture using socket ring.
ASSEMBLY INSTRUCTIONS
CAUTION
³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
TOOLS REQUIRED
³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Ladder
Safety glasses
Electrical Phillips
tape
screwdriver
Flat blade screwdriver
Pliers
Wire strippers
HARDWARE INCLUDED
Fixture
Glass Shade
Mounting Unit
Ball Nuts
Mounting Screws Wire Nuts
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
Mounting Unit
Mounting Screws Ball Nuts
Fixture
INSTALLATION STEP 1
Unscrew the ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.
Wire Nuts
Shade
Socket Ring
Bulbs (not included)
STEP 3
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box
Bare or Green ground wire from the junction box
*Sealing tape (not included)
Black wire from the fixture
White wire from the fixture
Ground wire from the Fixture
*Green Ground Screw
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 4
Attach the fixture to the mounting unit through screw holes as shown, and secure it with ball nuts.
STEP 5
Remove the socket ring from the socket. Attach the Shade onto fixture using socket ring.
STEP 6
Install bulbs (not included).
