GT2.5 1 8 Scale Nitro 2WD On Road Car
Product Information
GTDUE is a high-quality 1/8 scale nitro on-road car designed for
experienced users in the RC model car field. The car has an
aluminum chassis, adjustable front toe, camber, and caster,
adjustable rear toe and camber, and a bumper/front backstop. It
also includes a full ball bearing, carbon radio plate, 2WD
transmission, and gear differential. The car is supplied in a box
with an instruction manual and requires additional items such as an
engine and muffler, transmitter, receiver, Lexan body, low profile
steering servo, AA alkaline batteries for transmitter and receiver,
wheel-tyres-inserts, fuel and fuel pump, pocket booster, starter,
Allen keys (1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm), ring pliers, side
cutter, and scissors to assemble.
Product Usage Instructions
- Read and fully understand the instruction manual before
building and operating the car. - Ensure that the car is used by individuals over 16 years old
with experience in the RC model car field. Children and individuals
without this requirement must have direct supervision from an adult
responsible. - Use only original WRC spare parts for maintenance and
repairs. - Contact WRC support at [email protected] or visit their
website www.wrc-racing.com for any problem or question. - Obtain the required additional items such as an engine and
muffler, transmitter, receiver, Lexan body, low profile steering
servo, AA alkaline batteries for transmitter and receiver,
wheel-tyres-inserts, fuel and fuel pump, pocket booster, starter,
Allen keys (1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm), ring pliers, side
cutter, and scissors from a local hobby shop. - Follow the instruction manual completely prior to
assembly.
INTRODUCTION
GTDUE is a new generation high quality 1/8 scale nitro onroad car. GTDUE is supplied in a box equipped with Instruction Manual. Its use is intended for more than 16 years old persons with experience on rc model car field. Children and all the persons without this requirement MUST have direct supervision of a knowledgeable adult responsible.
SAFETY PRECAUTIONS
Instruction Manual MUST be read and fully understood before to start building and operating functions. Always keep Instruction Manual in safety place, ready to be consulted for any reference you need. Use only original WRC spare parts.
GENERAL INFORMATION
Assemble the kit only away from the reach of children. Follow the building and operating instructions using the utmost care. Don’t put any part of your body inside rotating and moving elements as this may cause damage or serious injury. Check and clean the model before putting it away. Don’t use your model car in public places or in roads and areas where it could generate conflict with person or vehicular traffic. The model car is controlled by radio: you MUST put great care to avoid loss of radio control always keeping a safety margin all around your model in order to prevent any collision. Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could cause loss of control of the RC model. Always turn on your transmitter before you turn on the receiver in the car and always turn off the receiver before you turn off your transmitter. Keep the wheels of the model off the ground when checking the operation of the radio equipment. Disconnect the battery pack before storing your model.
WARRANTY
WRC guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase. The total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty doesn’t cover any compnents damaged by use or modification or as result of wear. Part or parts missing from this kit must be reported within 30 days of purchase. No part or parts will be sent under warranty without proof of purchase. If you find a defective or missing part, contact the local distributor. Customer service and support will be provided through local hobby store. No warranties are expressed or implied that cover damage caused by what is considered normal use or cover or imply how long any model cars’ components or electric components will last before requiring replacement. Due to the high performance level of this model car you will need to periodically maintain and replace consumable components; any and all warranty coverage will not cover replacement of any part or component damaged by neglect, abuse or improper or unreasonable use. This includes but is not limited to damage from crashing, excessive moistur, improper use or no maintenance or user modifications which compromise the integrity of components. Warranty will not cover compnents that are considered consumable on RC model car. WRC doesn’t pay nor refund on any component sent from WRC or its distributor for warranty. WRC reserves the right to make final determination of the warranty status of any component or part Use only original WRC spare part:
CUSTOMER SUPPORT
Please don’t hesitate to contact WRC support at [email protected] for any problem or question. Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option parts and other information.
W.R.C. world racing car s.r.l.
Via A.Volta 2 Bis 36040 Brendola (VI)
ITALY
Phone: 0039 0 444 1792263 E-mail: [email protected] Website: www.wrc-racing.com
TECHNICAL INFORMATION
– BODY: PROTOTIPE MODEL (NOT INCLUDED) – ADJUSTABLE FRONT TOE, CAMBER AND CASTER – ADJUSTABLE REAR TOE AND CAMBER – BUMPER /FRONT BACKSTOP – ALUMINUM CHASSIS – FULL BALL BEARING – CARBON RADIO PLATE – TRANSMISSION: 2WD – REAR DIFFERENTIAL: GEAR DIFFERENTIAL
TECHNICAL DATA
– LENGHT ………………………………………435 MM. – WIDTH ………………………………………264 MM. – WHEEL BASE ……………………………….300 MM. – WEIGHT CHASSIS………………………..2080 GR.
REQUIRED BUT NOT INCLUDED IN THE KIT
ADDITIONAL ITEMS NEEDED FOR COMPLETION
ENGINE AND MUFFLER
TRANSMITTER
RECEIVER
LEXAN BODY
2 LOW PROFILE STEERING SERVO
AA ALKALINE BATTERIES FOR TRANSMITTER AND RECEIVER
WHEEL – TYRES – INSERTS
FUEL AND FUEL PUMP
POCKET BOOSTER
TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
STARTER
ALLEN: 1.5 MM. 2.0 MM. 2.5 MM. 3.0 MM.
RING PLIERS
SIDE CUTTER
SCISSORS
NOTICE:
THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE GT2; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP. BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
2
BAG.1
X2
00141
00226 90012 12x18x4 00100
00154
00226 90012 12x18x4
00107
00153
00152
93035 M5x16
03127
TENSION BELT REGULATION
(STANDARD POSITION) REAR
PLEASE NOTE ORIENTATION ADJUSTING BELT TENSION (SET 0 POSITION)
FRONT
+0
_
1.5
2.5
FRONT
3
BAG.2
00138
95009 Oring 6X1 97021 Ø3×25
00189 900016 6x10x3
00168
900016 6x10x3
91001 M3x10
90012 12x18x4
00117
98012 M4x4
93001 M3 x6
00121
00217
00117
900016 6x10x3 90012 12x18x4
98012 M4x4
00189
95010 Ø 38×1
00168 900016 6x10x3
95010 Ø 38×1 95009 Oring 6X1 00187
PLEASE SEE ATTENTION TO THE GEAR POSITION
SILICON OIL 200000 cst
4
BAG.3
90010 8x14x4
00118
00225
00161 Z46
97001 Ø3×11.8
00163-1
00167 Z20 99001 Ø 8
90010 8x14x4
99001 Ø 8
98012 M4x4
03277
92001 M3 x6
91000 M3X14
00101
00218 03239 00214
00214 00215
91000 M3X14
5
BAG.4
00219-1
92020 M4 x 8 03374
03223
00113-1
98001 M3X6
98001 M3X6 03104
00112-1 92029 M4 x 16
92029 M4 x 16
92001 M3 x6
93007 M3 x18
92021 M4 x 10 93007 M3 x18
03155
93001 M3 x6
03377
94001 M3
Autolock 94001 M3 Autolock
00144
97004 Ø3×8
6
BAG.5
00224 00205
00224 00207
98003 M3x4
00204
93004 M3 x12
93003 M3 x10
00210 97027 Ø3×55
99005 Seeger Ø12
00211
00108 00208 93004 M3 x12
93001 M3 x6
93031 M4 x8
96001 M4 x 10 Flanged
92020 M4 x 8
00158 00109
7
BAG.6
03152 03152-1 Optinal Alu 7075 T6
03219
03110
03110 1mm
00100 00141
93004 M3 x12 90012 12-18-4
03069
03101 93001 M3 x6
93002 M3 x8
00103
03110 90001 6_10_3
X2
92002 M3 x8
03069 00145 100412 95015 12×1.5 00105
90001 6_10_3 00145
93001 M3 x6
03069
8
BAG.6
00132
00124
00132
X2
40
96003 M3 x6 Flanged
00132 98005 M3x8
00132 03069
1
2°
93001 M3 x6
NOT INCLUDED
3
03055
93001 M3 x6
9
BAG.7
02013 00209-2
92001 M3 x6
03135
92001 M3 x6
92001 M3 x6
00150-2
92002 M3 x8
00192
00160-1
92020 M4 x 8 94005 M4
92020 M4 x 8
00150-1
03086-1
03069
03086-1
93001 M3 x6 03189-2
93004 M3 x12 03226
90007 5_8_2.5 03368
03367
00209-1
98005 M3x8
03226
93031 M4x8
93009 M2 x 5
93001 M3 x6
Not included 96002 M3 x8 03055
03366
93001 M3 x6
98012 M4x4
00129
03243-1
10
BAG.7
03344
93001 M3 x6 03226
93001 M3 x6
02039
03075 95000
11
BAG.8
Engine Not Included
00174-1
00185
00186 90020 5-10-3 03390
00173-18 90000 5-10-4 96002 M3 x8
03214-9 Air Box
Not Included
03214-8
1
91001 M3X10
Muffler Not Included
00151
02045
92001 M3 x6
00134
03234-1
00126
96001 M4 x 10
00171-1
03076
00142-1 00128
98000 M3x3
03076
00140
00230
FUEL PIPE 10mm 00142-1
12
REAR
X2
97009 Ø3×22
03219
03285
X2
93004 M3 x12 93003
M3 x10
FRONT 98000 M3x3
97008 3×20
03219 03284
FUEL PIPE
13
NAME DATE
TRACK
TRACK CONDITION
SURFACE
SMOOTH
SIZE
TIGHT
TRACTION LOW
CLUTCH SETTINGS SHOE CENTRIFUGAL SHOE SPRING
MEDIUM MEDIUM MEDIUM
BUMPY FAST HIGH
ENGINE ENGINE MUFFLER MANIFOLD PLUG
DRIVE RATIO PINION SPUR
TYRES
SHORE DIAMETER start mm. DIAMETER start mm.
FRONT REAR
BODY POSITION BODY POSITION SPOILER POSITION
TOE
SETUP SHEET CAMBER
FRONT CAMBER
CAMBER
FRONT WIDTH REAR CAMBER
FRONT WIDTH TOE
NAME DATE
TRACK
TRACK CONDITION
SURFACE
SMOOTH
SIZE
TIGHT
TRACTION LOW
CLUTCH SETTINGS SHOE CENTRIFUGAL SHOE SPRING
MEDIUM MEDIUM MEDIUM
BUMPY FAST HIGH
STANDARD STANDARD STANDARD
ENGINE ENGINE MUFFLER MANIFOLD PLUG
DRIVE RATIO
PINION
18
SPUR
46
TYRES
SHORE DIAMETER start mm. DIAMETER start mm.
FRONT
40/40 67
REAR
35/35 75
BODY POSITION BODY POSITION SPOILER POSITION
15 mm 10 mm
TOE IN -2°
SETUP SHEET
CAMBER 1°
FRONT CAMBER
CAMBER 1°
FRONT WIDTH
259
REAR CAMBER
FRONT WIDTH
264
TOE OUT +1.5°
RACING.COM - YOUR RACING CONNECTION
Home - WRC
