True Fine Td90030fl Bohemian Woven Rope Semi Flush Mount Ceiling Light Instruction Manual

TD90030FL Bohemian Woven Rope Semi Flush Mount Ceiling Light

Product Information:

Flush Mount Lighting

The Flush Mount Lighting is a ceiling light fixture that comes
with a fixture body, shade, socket ring, mounting strap, and
canopy. It has an input voltage of 120V and a rated power of 40W
MAX. The lamp socket used is E26. The product package includes an
instruction manual, wire nuts, long and short screws, and a green
grounding screw.

Product Specifications:

• Input voltage: 120V
• Rated power: 40W MAX
• Lamp socket: E26

Product Packaging:

• Instruction manual
• Wire nuts
• Long and short screws
• Green grounding screw

Cleaning:

To clean the fixture, wipe it with a soft cloth. Clean the glass
with a mild soap. Do not use abrasive materials such as scouring
pads or powders, steel wool or abrasive paper.

Product Usage Instructions:

Assembly Instructions:

1. Attach Shade (B) up onto the socket, then tighten with Socket
   ring (C).
2. Fix Mounting strap (E) to outlet box with Long screw (F).
3. Connect the wires according to the picture above. (Please refer
   to the wiring instruction for details)
4. Place Canopy (D) onto the outlet box, secure with Short screw
   (G).

Wiring Instructions:

1. Insert the green grounding screw into the hole with two raised
   dimples on the mounting bar. Wrap the ground wire from the fixture
   (if supplied) around the green grounding screw, then connect it to
   ground wire from the outlet box (if not fixed on the outlet box)
   using a wire connector (not supplied). If ground wire from the
   fixture is not supplied, wrap the ground wire (if not fixed on the
   outlet box) from the outlet box around the green grounding screw
   and tighten it.
   NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY
   WIRES.
2. Take note of the color of the wire(s) on your fixture. Identify
   which group your fixture wire(s) falls into and connect the wires
   according to the directions below:

   [GROUP A]: Connect to Black House Wire
   [GROUP B]: Connect to White House Wire

3. Take your fixture wire(s) from [Group A] and place evenly
   against the black wire from the outlet box. Do NOT twist wires
   together before using wire connectors.
4. Fit a wire connector over the wires and screw the connector
   clockwise until you feel firmness.
5. Try gently to pull the connector off the wires. If you can pull
   the connector off, carefully re-do steps 3 and 4 as above, and
   check again for a firm connection.
6. Connect the fixture wire from [Group B] to the white wire from
   the outlet box in the same manner. Make sure no bare wires can be
   seen outside wire connectors.

Note: Always switch off the electricity supply
and allow to cool for 10 minutes before changing the light
bulbs.

If you have any questions or concerns about the Flush Mount
Lighting, please contact us at [email protected].

Instruction Manual
Flush Mount Lighting

Overview
Outlet box Black
Wire nuts Smooth
[GROUP A] F.Long screw G.Short screw
A.Fixture body
B.Shade
C.Socket ring

Green(Ground)

White Ribbed

Bare copper wire(Ground)

E.Mounting strap

D.Canopy

Assembly Instruction
1.Attach Shade (B) up onto the socket , then tighten with Socket ring (C).
2.Fix Mounting strap (E) to outlet box with Long screw (F). 3.Connect the wires according to the picture above.
(Please refer to the wiring instruction for details ) 4.Place Canopy (D) onto the outlet box, secure with Short screw (G).

Wiring Instruction

1. Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.

NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.

2.Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:

BLACK

WHITE

*PARALLEL WIRE (round & smooth) *PARALLEL WIRE (square & ridged)

WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER

BROWN, GOLD OR BLACK WITHOUT TRACER

BROWN, GOLD OR BLACK WITH TRACER

3.Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors. 4.Fit a wire connector over the wires and screw the connector clockwise until you feel firmness. 5.Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
6.Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

Product Specifications

Input voltage 120V Rated power 40W MAX Lamp socket E26
Product Packaging
Fixture body × 1 Mounting strap × 1 Screw × 2 & Wire nut × 3 Shade × 1 Lamp instruction × 1
Cleaning
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.

CONTACT US
E-mail:[email protected]

Print in china

References

• Digital Services, Technology and Consulting | Reply